SKU #: MEL-421111 MPN #: 421111

Mel's Manufacturing 3" 2 Piece Downpipe 94-97 Ford 7.3L Powerstroke

$194.26

Get 194 points in loyalty rewards

Mel's Manufacturing 3" 2 Piece Downpipe for 94-97 Ford 7.3L Powerstroke

Description

Get rid of a major restriction point on your 1994-1997 7.3L Ford Powerstroke! The factory downpipe is a pancake. Not like the good ones with syrup on them, I mean a crushed, restrictive piece of junk. The Mel's Manufacturing 3" 2 piece downpipe will increase exhaust flow, which in turn will lower exhaust gas temperatures and give you a slight horsepower increase. These come with a flange at the bottom that bolts to your factory catalytic converter. If you don't have a cat, simply cut the flange off. Choose from either aluminized or stainless steel.

Select Material

Enter your zip and we'll see if installation is available.

Request quotes from local installers at checkout
Compare options and choose the best fit for your install

Free Customer Loyalty Program

No Salesmen, Just Enthusiasts

Get rid of a major restriction point on your 1994-1997 7.3L Ford Powerstroke! The factory downpipe is a pancake. Not like the good ones with syrup on them, I mean a crushed, restrictive piece of junk. The Mel's Manufacturing 3" 2 piece downpipe will increase exhaust flow, which in turn will lower exhaust gas temperatures and give you a slight horsepower increase. These come with a flange at the bottom that bolts to your factory catalytic converter. If you don't have a cat, simply cut the flange off. Choose from either aluminized or stainless steel.

NOT LEGAL FOR SALE OR USE IN CALIFORNIA

Manuals and Guides

INSTALL INSTRUCTIONS

Vehicle Fitment

1994-1997 7.3L Ford Powerstroke

WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

About Mel's Manufacturing Exhaust

Mel's Manufacturing has been building some of the best sounding, longest lasting, highest flowing, exhaust systems since 1981. They are truly innovators in constantly finding ways to improve upon the overall construction of their exhaust systems and components to ensure they can stand the test of time, no matter the environment they are in. For example, Mel's utilizes lap joint style clamps at most junctions, as opposed to u-bolt style hanger clamps that require crushing the joint to adjoin the two pieces. This allow you to disassemble the exhaust without the use of a Sawzall if the need ever arose. Further, their exhaust hangers feature a built in radius that follow the contour of the exhaust, allowing them to secure the hanger to the exhaust with a 6-7" weld, as opposed to a roughly 1" weld that would be required with an unbent hanger.