Easy with two!
"I installed the 4 I nch turbo back exhaust system. Aligning the down pipe to the turbo correctly is much easier with a second person. exhaust sounds great egt values lower. Recommend"
Cummins
Shop All
Quick Ship
SKU #: MBRP-S6200PLM
MPN #: S6200PLM
MBRP Armor Lite 4" Turbo Back Aluminized Exhaust System without Muffler 99-03 Ford 7.3L Powerstroke
Description
Ah, the original 7.3, such a cool, simple HEUI based engine known for its utter reliability and power capability. When asked how to upgrade the performance of this engine, the number one recommendation is always to add a 4" exhaust system. And for many enthusiasts, the only way to go is with a straight piped system such as this one. Built from only the highest quality aluminized steel and including all of the necessary hangers and clamps, this complete turbo back system will not only deliver the sound you want from your 7.3, but also the added performance, MPG's, and EGT reduction.
Built from heavy-duty aluminized steel, MBRP's Armor Lite Series performance exhaust systems offer a value price without compromising on the quality built into every component. Featuring a two-piece tail, we replaced the muffler with an MBRP muffler delete pipe to provide you with the ultimate in free flow exhaust. Constructed to the same specifications as their top of the line Armor Pro Series, its backed with a 1 Year Warranty.
Built to Perform - You count on your truck to handle whatever you need it to do. With MBRP performance exhaust, you can make that happen with up to 18 more horsepower and 28 ft/lb more torque, not to mention lower EGTs (Exhaust Gas Temperatures). More pulling power, improved throttle response, greater fuel efficiency, with an MBRP diesel performance exhaust you will be amazed at what your truck can do.
Minimize Backpressure - The secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the muffler-less design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200 degrees Fahrenheit and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.
Easy Installation - MBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.
Sound and Style - Performance is one thing, but MBRP believes that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With MBRP, there's no question that you have the hottest performance exhaust on the road - MBRP.
Enter your zip and we'll see if installation is available.
- Request quotes from local installers at checkout
- Compare options and choose the best fit for your install
About WrenchConnected
WrenchConnected is an independent installation marketplace operating in partnership with Diesel Power Products.
How it works
After checkout, we route your vehicle info and part SKU to verified installation shops near you. Local installers review the job and submit competitive bids; you pick the shop you want based on price, reviews, and availability. Your name and email stay private until you select an installer.
Pricing
You pay for the bid from your preferred shop. The full amount is shown before you confirm — installers cannot add charges without your written consent. Payments are processed securely by Stripe.
Your privacy
During bidding, shops see only your service ZIP code, vehicle year/make/model, and the part SKU — not your name, email, or address. Only the shop you select receives your contact details after payment. We never sell your personal information.
More detail at wrenchconnected.com.
SPECIFICATIONS:
- 4" Turbo Back (includes downpipe)
- No Muffler (includes muffler eliminator pipe)
- Built From Heavy Duty Aluminized Steel
- Single Side Exit
About MBRP Exhaust
Browse MBRP Performance Exhaust Systems Online by Make, Model, and Year.
For over twenty years MBRP Exhaust has been delivering performance enthusiasts the most in power, the most in product quality, and the most in customer responsiveness you could possibly expect from exhaust. It all began with the now famous B&B Eliminator, which soon achieved the status as the best selling performance snowmobile silencer of all time. Starting from little more than a vision and an absolute passion for all things performance MBRP inc. is now at the forefront of performance exhaust technology. Marshalling over ten decades of manufacturing and marketing expertise between them, the MBRP design team developed a line of performance diesel exhaust products that has made the rest of the industry take notice, and rush to catch up.
Offering all of its diesel systems in aluminized, T-409 stainless, T-304 stainless, aluminized black, and with and without a muffler ensures that there is an MBRP exhaust for every customer's need and pocketbook. Full bolt-on design and clear, well written instructions mean that consumers can install most of MBRP's systems with minimal tools and in under forty-five minutes. And for everyone, toll free technical support that can talk even the least experienced installer through the process.
MBRP offers many kits in both single and dual outlet configurations. While the performance gains are the same for duals and single systems, the duals offer a deeper more aggressive sound over the single system. This is due to the extra tail pipe and the fact that most dual systems have a slightly different muffler configuration than the single systems.
MBRP even manufactures their "Smokers" kits, which are single and dual in-bed STACK kits to deliver to the hardcore enthusiasts! These kits are available in an assortment of sizes and styles, such as 5" and 6", with turnouts and mitre (angle) cuts. Smokers kits are even available in the new popular BLACK finish for that truly sinister look!!!
The muffler used on all of MBRP's diesel systems is a straight flow through design with a spiral louver core. The muffler is packed with stainless steel wool which is then wrapped with a ceramic fibre blanket to ensure longevity of the muffler. This combination creates the deep mellow exhaust note that MBRP systems are known for.
While performance gains vary depending on the vehicle, you can expect a gain of 5% to 10% in horsepower and torque. For example, with a 2005 GM Duramax diesel, you will see a gain of 18 HP. and 28 ft/lbs measured at the rear wheels. You can also expect a reduction in exhaust gas temperature (EGT) by approximately 200 Degrees F.
Offering all of its diesel systems in aluminized, T-409 stainless, T-304 stainless, aluminized black, and with and without a muffler ensures that there is an MBRP exhaust for every customer's need and pocketbook. Full bolt-on design and clear, well written instructions mean that consumers can install most of MBRP's systems with minimal tools and in under forty-five minutes. And for everyone, toll free technical support that can talk even the least experienced installer through the process.
MBRP offers many kits in both single and dual outlet configurations. While the performance gains are the same for duals and single systems, the duals offer a deeper more aggressive sound over the single system. This is due to the extra tail pipe and the fact that most dual systems have a slightly different muffler configuration than the single systems.
MBRP even manufactures their "Smokers" kits, which are single and dual in-bed STACK kits to deliver to the hardcore enthusiasts! These kits are available in an assortment of sizes and styles, such as 5" and 6", with turnouts and mitre (angle) cuts. Smokers kits are even available in the new popular BLACK finish for that truly sinister look!!!
The muffler used on all of MBRP's diesel systems is a straight flow through design with a spiral louver core. The muffler is packed with stainless steel wool which is then wrapped with a ceramic fibre blanket to ensure longevity of the muffler. This combination creates the deep mellow exhaust note that MBRP systems are known for.
While performance gains vary depending on the vehicle, you can expect a gain of 5% to 10% in horsepower and torque. For example, with a 2005 GM Duramax diesel, you will see a gain of 18 HP. and 28 ft/lbs measured at the rear wheels. You can also expect a reduction in exhaust gas temperature (EGT) by approximately 200 Degrees F.
Video
Diesel Talk | MBRP Exhaust Kits
When your diesel truck sounds good, you feel good. MBRP has you covered with 4” or 5” sizes and a choice of straight pipe or a muffler. Choose from three different materials; ARMOR LITE (Aluminized), ARMOR PLUS (409SS), or ARMOR PRO (304SS), and don’t forget to finish it off with a tip! Get ready to fall in love with your truck again without breaking the budget.
Video
Diesel Talk | MBRP Exhaust Systems
Looking for more power, better sound, and improved efficiency? MBRP exhaust systems deliver it all! Designed for maximum airflow and durability, these exhausts reduce backpressure, enhance performance, and give your ride that deep, aggressive tone. Whether youre towing, racing, or daily driving, MBRP has the perfect system for you.
Blog
April 20, 2026
This article covers some of the most common Jeep Gladiator diesel problems, what to watch for, and...
Read MoreJeep Gladiator Diesel Problems: Common Issues Explained
December 22, 2025
Learn how to make your truck louder with exhaust tips, mufflers, and safe upgrades. A clear guide...
Read MoreHow to Make My Truck Louder: Exhaust Sound Tips & Upgrades
October 21, 2025
It’s frustrating when your diesel truck doesn’t feel as strong as it used to. Maybe it takes...
Read MoreWhy Your Diesel Truck Feels Sluggish: Simple Checks You Can Do at Home
April 18, 2025
With the cost of new vehicle costs nearing, and sometimes exceeding the six digit mark, many of...
Read MoreHow To Diagnose and Replace A Steering Gear Box
Overall rating: 4.7777777 / 5 from 18 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["value","sound","fit","install"].
Review highlights
Reviews
Easy to install and it
"Easy to install and it sounds great."
Xlnt fit Zero issues
"Had absolutely no issues with installation. It took about an hour and a half"
4 inch, turbo back
"Fit was excellent and as expected. I’m very happy with my purchase and the performance!"
Excellent product and fit perfectly
"Excellent product and fit perfectly no problems. Sounds good. Box very strong, no tears or missing parts. Highly recommend."
Great sounding
"Easy install, sounds amazing, high quality!"
Shipping was great, just installed
"Shipping was great, just installed it yesterday sounded good sitting there just haven't taken it for a drive yet"
Fit great. Instructions were actually
"Fit great. Instructions were actually helpful. That doesn’t happen often. Love the sound"
Sounds great, and makes my
"Sounds great, and makes my 7. 3 whistle!! Easy install, took me about 1 hour! Definitely recommend."
Everything fit and sounds awesome
"Everything fit and sounds awesome"
Q&A
- Will this fit a 2000 7.3 Excursion?
- This system will not fit the Excursion models, however, we still offer a couple of options from MBRP that will, shown here: https://www.dieselpowerproducts.com/p-16150-mbrp-s6204409-4-turbo-back-single-outlet-xp-series-stainless-exhaust-kit-00-03-73l-ford-powerstroke-excursion.aspx https://www.dieselpowerproducts.com/p-16143-mbrp-s6204al-4-turbo-back-single-outlet-installer-series-exhaust-kit-00-03-73l-ford-powerstroke-excursion.aspx
- Does if fit a 7.3 F250 single cab long bed 4x4
- Yes that will fit a single cab long bed.
- Does this kit fit a 2002 f250 crew cab? Does it include the Down pipe and clamp? Does it need any extension pipe to make it fit correctly?
- This will not require and extension pipe. The kit comes with the largest configuration ( 4 door, long bed) where if you have a shorter configuration will require you to cut the pipe to length. -Mark
- I see that this model of straight pipe is not available to ship to California, Could you tell me why and recommend something similar/
- At this time the only CA shippable exhaust is going to be a FLO-PRO exhaust kit: FLO-831NM -Mark
- Will this fit a 2000 f350 cab and chassis
- Typically no, if you search cab and chassis on our website it should pull up a system that will be designed to fit the Cab and chassis. -Sands