BDS Suspension 3" Lift Kit 03-13 Dodge 2500 | 3500 4WD

Time to elevate your ride and see what you've been missing. Get the BDS 3" Lift Kit and you have everything you need to reach the next level on your Ram pickup. Why would you want a BDS 3" lift kit on your Ram? How about a better ride, both on AND off-road, along with a leveled stance for larger tire fitment. This kit features 3" front Pro-Ride Coil Springs that are applications specific to diesel models. These dual-rate springs provide great ride and performance in all conditions. Fixed length, greaseable, heavy-duty round tubular construction upper and lower control arms position the axle properly and adjust for proper caster and pinion angles.Fixed length sway bar links with stud eliminator converts the failure-prone stem style factory sway bar links to an eye-to-eye design, providing greater strength, longer service life, and greater range of motion. An adjustable front track bar is included, as well, to center the axle and provide additional strength.Not only is this kit designed to last, but so is the finish. Every bracket is electro-coated black to ensure long-term performance and good looks. SHOCK OPTIONS: NX2 Nitro Series Shocks - BDS NX2 series gas shocks offer impressive performance on and offroad. They use a nitrogen-charged, twin-tube design with 10-stage velocity-sensitive valving for lightning fast dampening and superior control. FOX 2.0 Series Shocks - Fox 2.0 performance series shocks have been tuned and tested by both FOX and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shocks race products but re-designed to maximize the ride quality, handling, and control of your BDS equipped truck, whether on or off the road. STEERING STABILIZER OPTIONS: IMPORTANT FITMENT NOTE: All 2008.5+ model Rams have T-Style Steering from the factory and most 2003-2008 models have been retrofitted with this from the original Y-Style Steering. If you have a 2003-2008 model year and are uncertain as to which steering you have, look at how the current steering stabilizer mounts. If it is mounted using two u-bolts and a plate at the center of the tie rod, then you have the T-Style Steering and this kit is for you. However, if your current stabilizer mounts using a stud through a hole in the middle of the tie rod, then you have the Y-Style Steering. Single NX2 Nitro Series: NX2 Series of Shocks are built to take on any challenge but not empty your wallet. Durable and built with BDS suspension kits in mind, the large fluon banded piston is adaptable for any terrain and tough enough for any challenge. Dual NX2 Nitro Series: Is one not enough? Then upgrade to a dual steering stabilizer setup, which further enhances vehicle control and lessens side-to-side motion to a greater effect. Heavy off-roading requires a heavy suspension that can handle it but can still be smooth on asphalt. Dual FOX 2.0 Performance Series: Taking things even further is the dual FOX 2.0 setup. Built to last from the top up this performance setup will enhance control, reduce shimmy and bump steer, improve tire wear and front-end component life. Protect your investment and smooth out your rough spots before they leave you figuratively hanging. CARRIER BEARING DROP OPTION: A Carrier Bearing Drop Kit will be needed if you have a 2-Piece Rear Driveshaft to ensure the correct alignment and keep vibrations to a minimum. FRONT SWAY BAR DISCONNECTION OPTION: Get 30% more axle articulation with this sway bar disconnect kit. If you're REALLY going off-road and need to keep those front tires planted, get this installed today. IMPORTANT NOTES: Measure rear axle tube before ordering. Some 4" axle models have dual overloads that will require #4063 u-bolts. Rear lift options will not fit dually applications. Not recommended for Power Wagon models. Will not fit commercial chassis (Cab and Chassis) models.