• Cart

Expert Pick
SKU #: SB-75-5132 MPN #: 75-5132

S&B Cold Air Intake System 19-24 Ram 6.7L Cummins

$379.00
Get 379 points in loyalty rewards
Description
The S&B cold air intake for the 2019-2024 Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat. NEW SNAP IN LID DESIGN: S&B's new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat. INNOVATIVE SNAP IN FILTER DESIGN: The air filter simultaneously snaps into the airbox and intake tube to compensate for engine movement and provides an airtight seal that protects from unwanted, power-robbing engine heat. S&B engineers this intake to allow your engine to run properly with stock tuning calibrations or enhanced aftermarket tuning. This kit is designed to avoid check engine lights. Featuring injection molded MAF(Mass Air Flow) plate and IAT (Intake Air Temp) sensor port that insures a true o-ring seal to the sensor. The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.
filter option

Enter your zip and we'll see if installation is available.

  • Request quotes from local installers at checkout
  • Compare options and choose the best fit for your install

The S&B cold air intake for the 2019-2024 Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN: S&B's new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat.

INNOVATIVE SNAP IN FILTER DESIGN: The air filter simultaneously snaps into the airbox and intake tube to compensate for engine movement and provides an airtight seal that protects from unwanted, power-robbing engine heat.

S&B engineers this intake to allow your engine to run properly with stock tuning calibrations or enhanced aftermarket tuning. This kit is designed to avoid check engine lights. Featuring injection molded MAF(Mass Air Flow) plate and IAT (Intake Air Temp) sensor port that insures a true o-ring seal to the sensor. The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.

EXECUTIVE ORDER #D-590-3
Vehicle Fitment
2019-2024 Ram 6.7L Cummins
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
About S&B
Browse S&B Cold Air Intakes Online by Make, Model, and Year.

S&B Filters specializes in the manufacturing of high quality cold air intakes, air filters, intake manifolds, as well as other performance parts for light duty diesels to include Dodge Rams with a Cummins diesel engine, Powerstroke equipped Ford, and Chevrolet and GMC's with the hard working Duramax engine, as well as gas trucks and SUVs. With their combination of quality, performance, and affordability, they are one of our top picks when someone wants a recommendation for an air intake system.

Due in large part to the extensive amount of research and development S&B performs on every single part they produce, they are able to maximize airflow to deliver the biggest gains and have the simplest installation that nearly anyone can perform with basic hand tools. To reaffirm their commitment to build a quality product, S&B backs their air filters and intake kits with a one million mile warranty, as well as tests to meet or exceed ISO 5011 standards. S&B keeps their quality high and their pricing low by making almost everything themselves.

Browse S&B Fuel Tanks by Make, Model, and Year.

Many of today's modern diesels are equipped with puny fuel cells that require auxiliary, bed mounted systems to become almost mandatory for any of us traveling long distance, or simply don't want to fill up every other day. While there are options that exist on the market for replacement cells, none have gone to the extent that S&B Tanks has with features that the entire diesel market has been asking for. Similar to stock ground clearance? Check! Integrated fuel sump? Check? Easy installation? Absolutely! When you're ready to upgrade your truck's Distance to Empty, look no further than S&B Tanks.

Browse S&B Suspension by Make, Model, and Year.

For us Diesel Heads, our truck is more than just a way to get from point A to point B. They are part of our profession and lifestyle. When that's the case, you want to make sure that every mile you drive and every minute you spend in it is exactly what your looking for. Look no further than S&B Suspension's premium lift kits that combine strength, drivability, and performance into one package. You may know S&B for their filters and tanks but the same quality and look you are used to exist for their suspension systems as well.

Video
Diesel Talk | S&B Cold Air Intakes
Are you ready to up your airflow for improved performance and fuel economy with the highest quality cold air intake on the market for your diesel engine? If so, you found it! Check out our product overview of S&B Filters.
Video
Boost It: S&B Cold Air Intakes
Get the most out of your engine with S&B Cold Air Intakes! Designed to maximize airflow, these high-quality intakes increase horsepower, improve throttle response, and boost overall performance. With premium materials and innovative filter technology, S&B Cold Air Intakes help keep your engine clean while enhancing efficiency. Perfect for those who want to unleash their vehicles potential, whether on the street, trail, or track!
Video
Diesel Talk | S&B Dry vs. Oiled Filters
Confused about whether to choose a dry or oiled air filter for your truck? In this video, Diesel Power Products teams up with S&B to break down the key differences between dry and oiled filters. We’ll cover performance, maintenance, filtration efficiency, and which option is best for your driving needs. Whether you’re looking for ease of cleaning or maximum airflow, we’ve got you covered.

Overall rating: 4.5625 / 5 from 48 reviews.

AI Generated Review Summary

The S&B Cold Air Intake System for 2019-2024 Ram 6.7L Cummins is praised for its professional appearance, ease of installation, and fast shipping. Customers appreciate the large filter and innovative design that enhances airflow without triggering check engine lights.

Summary topics

  • Professional Appearance: 18%
  • Intake Design: 15%
  • Filter Size: 12%
  • Shipping Speed: 15%
  • Ease of Installation: 18%

Review topics: ["fit","instructions","looks","install","difference","performance","fitment","shipping","power","intake","filter","sounds","whistle","truck","upgrade","codes","system","increase","brakes","business"].

Review highlights

  • "12-2024 Good install, nice LARGE filter."Charles J.
  • "Very happy with this intake and filter so far."Justin W.
  • "Looks are very professional, easy install takes about a half hour to remove stock and install new one."Blake P.

Reviews

Great Product!

"I installed this cold air intake and it’s a definite upgrade. Installation was a breeze. No codes have gone off since the installation. Just follow the detailed instructions and you won’t have any problems. Great product!! My engine is happy…"

Morgan L. (5/5)

Awesome upgrade

"The truck is so much more responsive. Leaving from a stop it used to be sluggish but withe the S&B cold air intake upgrade the truck now feels more like a gas engine than a diesel. Instant power. So happy with this product."

Russell P. (5/5)

Nice

"Great product. Immediate performance noticed. also looks nice as a plus"

Travis M. (5/5)

"Good"

Keegan (5/5)

"Easy install and less lag and sounds better"

Stuart (5/5)

"Other than the one sensor being a pain in my rear, totally in love with the look and performance defenitely felt in the pedal! Super good quality"

Dylan (4/5)

S&B Intake

"Perfect fit and easy install with clear directions."

Cory B. (5/5)

This intake system is a game-changer for my truck.

"Overall Experience:* I'm extremely satisfied with this purchase. The S&B Cold Air Intake System has exceeded my expectations in terms of performance, fitment, and quality. If you're looking to upgrade your Ram's intake system, I highly recommend this product."

ENRIQUE G. (5/5)

"It arrived quick. Easy install and works great."

Emilio (5/5)

"easy to install if you know what you’re doing makes the turbo sound great Jake break sounds good as well"

Michael (5/5)

Q&A

I have a 2020 Ram4500 C&C can this fit on my vehicle ?
The manufacturer has only confirmed compatibility with the 2500 and 3500 chassis.
Any word on carb approval?
We have not heard anything from S&B yet. Still pending. Hopefully just a couple more month or less. Thank you! -Sands
Will this fit a 2020 Ram 5500?
Unfortunately no, just 2500 and 3500's per S&B. -Sands
Is this the updated version? S&B redesigned the down tube by relocating the sensors to help with check engine lights.
Hi Joe, this is the most up to date version that S&B offers and will not cause check engine lights. Let us know if you have any other questions. -DPP Mark
For the S&B COLD AIR INTAKE SYSTEM 19-21 6.7L RAM CUMMINS, can you remove the filter for cleaning through the window or do you need to remove the entire assembly?
You can remove the filter through the top for cleaning. -Sands