SKU #: PMF-FRD-6001-B MPN #: PMF-FRD-6001-B

PMF Suspension SD Adjustable 3-Link Arms 05-22 Ford F-250/F-350

$1,099.99

Get 1099 points in loyalty rewards

PMF Suspension SD Adjustable 3-Link Arms for 05-22 Ford F-250 and F-350

Description

There are a lot of moving parts to a vehicle lift, quite literally actually. The radius arms on 2005-2022 Ford Super Duty trucks are weak, and when you add additional leverage with lifts and wider wheels, you run the risk of component failure. That's in addition to diminished drivability and control. There's a solution available from PMF Suspension, which will give you room to grow, and help ensure a quality ride. In the same vane, Ford Super Duty trucks are notorious for not having adequate caster and when there's a change in your truck's height, you'll notice a floaty vague steering feel, unless you add caster shims to roll the front axle away from the firewall side of things. If you're making upgrades to your suspension, for racing, a lift, or even lowering, PMF offers an American made solution that will give you versatility and the adjustments needed to properly align your truck so you can regain control of your ride.PMF's Adjustable 3-Link Arms are a direct bolt on upgrade for anyone with a stock or lifted truck. These replace the weak stock radius arms with ultra duty adjustable 3-link arms. Both the upper and lower arms are adjustable to allow proper placement of the front axle in addition to adjustment of your castor. By allowing fine tuning of your castor paired with the increased strength of these arms, you can significantly improve the handling and steering characteristics of your truck. As always, these are built by hand with pride here in the USA!Many lifted trucks that use radius arm drop brackets that can be an eye sore and with some designs weaker than factory, you can replace both the drop bracket and the radius arm for a nice clean installation. When a drop bracket is installed, the added drop adds leverage to the factory radius arm bracket. This can cause a loose/unstable feeling. In some catastrophic cases, this can even cause the radius arm/drop bracket to sheer the radius arm mount off the frame. Don't cut corners and sacrifice ride quality and safety! All joints used on these arms are re-buildable and greaseable. This will make for a smooth quiet operation and reduced service costs down the road.All grade 8 hardware is supplied with the kit. These are capable of adjustment to factory alignment specs up to a 7" lift.

Choose Your Finish

Enter your zip and we'll see if installation is available.

Request quotes from local installers at checkout
Compare options and choose the best fit for your install

Free Customer Loyalty Program

No Salesmen, Just Enthusiasts

There are a lot of moving parts to a vehicle lift, quite literally actually. The radius arms on 2005-2022 Ford Super Duty trucks are weak, and when you add additional leverage with lifts and wider wheels, you run the risk of component failure. That's in addition to diminished drivability and control. There's a solution available from PMF Suspension, which will give you room to grow, and help ensure a quality ride. In the same vane, Ford Super Duty trucks are notorious for not having adequate caster and when there's a change in your truck's height, you'll notice a floaty vague steering feel, unless you add caster shims to roll the front axle away from the firewall side of things. If you're making upgrades to your suspension, for racing, a lift, or even lowering, PMF offers an American made solution that will give you versatility and the adjustments needed to properly align your truck so you can regain control of your ride.

PMF's Adjustable 3-Link Arms are a direct bolt on upgrade for anyone with a stock or lifted truck. These replace the weak stock radius arms with ultra duty adjustable 3-link arms. Both the upper and lower arms are adjustable to allow proper placement of the front axle in addition to adjustment of your castor. By allowing fine tuning of your castor paired with the increased strength of these arms, you can significantly improve the handling and steering characteristics of your truck. As always, these are built by hand with pride here in the USA!

Many lifted trucks that use radius arm drop brackets that can be an eye sore and with some designs weaker than factory, you can replace both the drop bracket and the radius arm for a nice clean installation. When a drop bracket is installed, the added drop adds leverage to the factory radius arm bracket. This can cause a loose/unstable feeling. In some catastrophic cases, this can even cause the radius arm/drop bracket to sheer the radius arm mount off the frame. Don't cut corners and sacrifice ride quality and safety! All joints used on these arms are re-buildable and greaseable. This will make for a smooth quiet operation and reduced service costs down the road.

All grade 8 hardware is supplied with the kit. These are capable of adjustment to factory alignment specs up to a 7" lift.

Vehicle Fitment

2005-2022 Ford F-250 / F-350

WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

About PMF Suspension

PRECISION METAL FABRICATION

PMF (Precision Metal Fab) Suspension is not your typical suspension company. Based out of Tucson, Arizona, they are a small, family based manufacturing facility that specializes in building quality replacement components to bulletproof the steering and suspension of your HD Ford, Ram, or Chevy.

WHY PMF SUSPENSIONS?

With PMF, you will never find corners being cut only in an effort to save money. Great pride in complete customer satisfaction is at the heart of their business, delivering products that deliver a real, tangible result in improved steering respponse and suspension performance, whether that's a simple replacement drag link or a complete four link conversion, you're in good hands when you choose PMF.

We at Diesel Power Products first had personal experience with PMF when the drag link on our 2020 F-350 failed with only 15k miles on it. After research, it proved that PMF was the best option to upgrade, and to say that we're impressed with the result, and even the original packaging of the product when it arrived to us would be an understatement! As with most products, we prefer to test them before offering them to our customer base, and this was no different. We know you'll be happy with any of PMF's upgraded components and kits. As always, if you have any questions about what parts are right for you and your truck, don't hesitate to give us a call or shoot an e-mail to cs@dieselpowerproducts.com and we would be happy to assist.

SHOP PMF LIFT KITS, DRAG LINKS, TRACK BARS, AND MORE AT DPP