S&B intake looks great
"Great product! Only lost a star due to it took 3 months to get delivered."
Cummins
Shop All
SKU #: SB-75-5140D
MPN #: 75-5140D
S&B 75-5140 Cold Air Intake 20-26 Ford 6.7L Powerstroke
Description
Overview
Are you ready to up your airflow for improved performance and fuel economy with the highest quality cold air intake on the market for your 6.7L Powerstroke? If so, you found it!S&B builds cold air intakes, and that's all that they make, so they're pretty darned good at it. With S&B, you'll find that they only use the highest quality materials coupled with the best machinery built in the USA and do it all at a price point that's pretty tough to beat.
MAXIMUM PERFORMANCE - This cold air intake for the Ford 6.7L Powerstroke was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
NEW SNAP IN LID DESIGN - S&B's new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy, as the filter can be installed and removed without having to remove the intake tube. The silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
LESS RESTRICTION. MORE AIRFLOW - The Intake Tube has minimal bends as it connects to the turbo inlet. It is positioned in one clean line with minimum obstructions from the turbo inlet to the intake box and air filter. This results in a decrease in restriction compared to stock.
CHOOSE YOUR AIRFLOW - This intake kit has (2) airflow configurations. S&B includes a silicone box plug that can be installed or removed depending on personal preference and airflow requirements. Silicone Box Plug removed: - This configuration will provide an extra air inlet that will be pulled from the passenger side fender area. Silicone Box Plug installed: - This configuration will seal the secondary air inlet located on the side of the box facing the vehicle fender. The front-facing grill inlet and the front scoop will become the main source of airflow into the Intake Box.
NO CHECK ENGINE LIGHTS - S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. An injection molded MAF plate in conjunction with a foam MAF sensor gasket ensures a true OE seal to the sensor.
Choose add-ons
Enter your zip and we'll see if installation is available.
- Request quotes from local installers at checkout
- Compare options and choose the best fit for your install
About WrenchConnected
WrenchConnected is an independent installation marketplace operating in partnership with Diesel Power Products.
How it works
After checkout, we route your vehicle info and part SKU to verified installation shops near you. Local installers review the job and submit competitive bids; you pick the shop you want based on price, reviews, and availability. Your name and email stay private until you select an installer.
Pricing
You pay for the bid from your preferred shop. The full amount is shown before you confirm — installers cannot add charges without your written consent. Payments are processed securely by Stripe.
Your privacy
During bidding, shops see only your service ZIP code, vehicle year/make/model, and the part SKU — not your name, email, or address. Only the shop you select receives your contact details after payment. We never sell your personal information.
More detail at wrenchconnected.com.
S&B Cold Air Intake for the 6.7L Powerstroke is engineered to minimize air restriction and flow better than stock for improved performance and fuel economy.
- Fits
- 2020-2024 Ford 6.7L Powerstroke
- Brand
- S&B
- Best for
- Improving airflow, performance, and fuel economy
- Key features
- Fully enclosed airbox protects filter from dirt and engine heat
- Snap-in lid design requires no screws for quick filter access
- Silicone edge trim ensures an airtight seal
- Intake tube has minimal bends for less restriction and more airflow
- Two selectable airflow configurations via removable silicone box plug
- Injection molded MAF plate with foam gasket ensures true OE sensor seal
Summarized by AI from this product’s description and specs. Confirm fitment for your year, make and engine before ordering.
FITMENT NOTE:
- This intake system will fit the 6.7L Powerstroke High Output.
About S&B
Browse S&B Cold Air Intakes Online by Make, Model, and Year.
S&B Filters specializes in the manufacturing of high quality cold air intakes, air filters, intake manifolds, as well as other performance parts for light duty diesels to include Dodge Rams with a Cummins diesel engine, Powerstroke equipped Ford, and Chevrolet and GMC's with the hard working Duramax engine, as well as gas trucks and SUVs. With their combination of quality, performance, and affordability, they are one of our top picks when someone wants a recommendation for an air intake system.
Due in large part to the extensive amount of research and development S&B performs on every single part they produce, they are able to maximize airflow to deliver the biggest gains and have the simplest installation that nearly anyone can perform with basic hand tools. To reaffirm their commitment to build a quality product, S&B backs their air filters and intake kits with a one million mile warranty, as well as tests to meet or exceed ISO 5011 standards. S&B keeps their quality high and their pricing low by making almost everything themselves.
Browse S&B Fuel Tanks by Make, Model, and Year.Many of today's modern diesels are equipped with puny fuel cells that require auxiliary, bed mounted systems to become almost mandatory for any of us traveling long distance, or simply don't want to fill up every other day. While there are options that exist on the market for replacement cells, none have gone to the extent that S&B Tanks has with features that the entire diesel market has been asking for. Similar to stock ground clearance? Check! Integrated fuel sump? Check? Easy installation? Absolutely! When you're ready to upgrade your truck's Distance to Empty, look no further than S&B Tanks.
Browse S&B Suspension by Make, Model, and Year.For us Diesel Heads, our truck is more than just a way to get from point A to point B. They are part of our profession and lifestyle. When that's the case, you want to make sure that every mile you drive and every minute you spend in it is exactly what your looking for. Look no further than S&B Suspension's premium lift kits that combine strength, drivability, and performance into one package. You may know S&B for their filters and tanks but the same quality and look you are used to exist for their suspension systems as well.
Video
Product Overview: S&B Cold Air Intake 2020 Ford Powerstroke
Check out the new S&B intake for your 2020 Ford 6.7L Powerstroke.
Video
Diesel Talk | S&B Cold Air Intakes
Are you ready to up your airflow for improved performance and fuel economy with the highest quality cold air intake on the market for your diesel engine? If so, you found it! Check out our product overview of S&B Filters.
Video
Boost It: S&B Cold Air Intakes
Get the most out of your engine with S&B Cold Air Intakes! Designed to maximize airflow, these high-quality intakes increase horsepower, improve throttle response, and boost overall performance. With premium materials and innovative filter technology, S&B Cold Air Intakes help keep your engine clean while enhancing efficiency. Perfect for those who want to unleash their vehicles potential, whether on the street, trail, or track!
Video
Diesel Talk | S&B Dry vs. Oiled Filters
Confused about whether to choose a dry or oiled air filter for your truck? In this video, Diesel Power Products teams up with S&B to break down the key differences between dry and oiled filters. We’ll cover performance, maintenance, filtration efficiency, and which option is best for your driving needs. Whether you’re looking for ease of cleaning or maximum airflow, we’ve got you covered.
Blog
July 07, 2026
There is no shortage of claims about cold air intakes. They are marketed as an easy way...
Read MoreWhat To Expect With A Cold Air Intake On Stock Trucks
September 20, 2024
Looking to give your 6.7 Powerstroke a performance boost? Upgrading your cold air intake is a great...
Read MoreChoosing the Best Cold Air Intake for 6.7 Powerstroke Performance
October 06, 2026
The P0087 code signals low fuel rail pressure in diesel trucks, often traced to a failing lift...
Read MoreP0087 Code: Low Fuel Rail Pressure Explained
October 05, 2026
White smoke from a diesel engine means different things depending on when it shows up, how long...
Read MoreWhat Causes White Smoke From a Diesel Engine?
Overall rating: 4.6666665 / 5 from 21 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["looks","fit","quality","shipping","install","intake","upgrade","buy","works","sounds"].
Review highlights
Reviews
Great Airflow Upgrade for the F350
"Installed the S&B intake on my 2022 F350 6. 7 Powerstroke and I’m really impressed with the quality and fitment. Everything lined up perfectly and installation was straightforward. The build quality is solid and the intake box seals up nice so you’re still pulling clean air. Right away I noticed smoother throttle response and the turbo seems to spool quicker. The truck feels like it breathes easier, especially when getting on the throttle or towing. It also cleaned up the engine bay compared to the factory setup. Another thing I like is that this upgrade improves airflow without causing issues with the truck or throwing codes. For anyone running a 6. 7 Powerstroke and looking for a reliable airflow upgrade without messing with reliability, this is definitely worth it. Overall very happy with the purchase and the performance improvement. S&B makes quality parts."
Looks great and pretty easy
"Looks great and pretty easy to install. Everything lined up perfectly"
"Great fast shipping"
Cold air intake take
"Shipped fast and super easy to install. Sounds great too"
Cold air intake
"Item was as described. Easy to install, looks professional, and fits as good or better than the original. 100% satisfied with this product."
Love it! Easy install! Perfect
"Love it! Easy install! Perfect Install instructions! Looks Clean! Fits perfect! Runs good! Sounds cool letting the turbo breathe! 2023 F-350 Platinum Dually"
overall improvement. my truck can
"overall improvement. my truck can breathe now!!"
Love the look of these
"Love the look of these it fit perfect and install was easy and quick"
Easy installation, like the looks
"Easy installation, like the looks and the rumble sound. Fast shipping!"
Q&A
- What is the pros and cons of the oiled filter vs the dry? Why choose and which one is the best? Thank you.
- There isn't a true "best" between the two. Dry filters are lower maintenance and safer for daily driving, while oiled filters can offer slightly better airflow but require proper upkeep to avoid sensor issues. It's preference and what you are aiming for.
- Is it carb legal in California
- This intake is CARB legal in California and comes with a carb sticker.
- Does this product void factory warranties?
- S&B states: S&B commits that our customers will not be charged for a repair due to the manufacturer denying their warranty claim because of the presence of an S&B intake kit or OE replacement filter. We warrant that using an S&B intake kit or OE filter will not result in the denial of your vehicle’s warranty. -Sands