What are the key features of the Mevotech TTX Lower Control Arm and Ball Joint Assembly 11-19 GM 2500HD/3500HD?

Patented sintered bearings for longer-lasting toughness; Patented sealing ring locks boot onto ball joint housing to block contaminants; Slotted castle nut and snap cotter pin for quick installation; 180 degree SAE grease fitting included for easy servicing; Upgraded rubber bushings with knurling for secure sub-frame attachment; Application-specific ball stud system with larger sphere; Pre-applied nylok thread adhesive for vibration-resistant fasteners; Forged steel construction meeting or exceeding OE specifications; Repel-TEK surface treatment to prevent rust build-up

Quick Ship

SKU #: MT-CTXMS501180 MPN #: CTXMS501180

Mevotech TTX Lower Control Arm and Ball Joint Assembly 11-19 GM 2500HD/3500HD

$280.93

Get 280 points in loyalty rewards

Mevotech TTX Lower Control Arm and Ball Joint Assembly for 11-19 GM 2500HD and 3500HD

Description Overview

If you have been upgrading the suspension of your truck for more lift or bigger tires, you are going to be putting some added stress on areas of your truck that might not be able to handle it. Do you trust your axle, steering, and suspension not to break at the worst possible time?Whether upgrading or replacing parts on your diesel truck, it pays to get parts that can handle the everyday stresses of your truck's life. That part broke for a reason, so why grab an equal or lesser quality item only to replace it again? Mevotech's TTX line of truck parts is designed and engineered to be the strongest, most durable parts on the planet. TTX is made for working vehicles that handle what's thrown at them. Plus, they are all made with innovative Labor Savertm designs, tools, and hardware, so you know that installation is going to be easy enough that you won't mind replacing it a second time. Maximum quality on Mevotech TTX control arm assembly means you get: MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings. LOCKS OUT CONTAMINANTS: Ensure a superior seal with a patented sealing ring that permanently locks the boot onto the ball joint housing. QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific slotted castle nut & easy snap cotter pin provided. SIMPLE TO SERVICE: Make servicing a snap with the 180 degree SAE grease fitting included. THE ULTIMATE HIGH-PERFORMANCE DESIGN: Experience higher performance from upgraded rubber bushings with knurling that secures the control arm bushing to the sub-frame. LARGER SPHERE DESIGN: Optimize performance with an application-specific ball stud system with larger sphere. A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied nylok thread adhesive. OPTIMAL PERFORMANCE: Meet or exceed OE specifications with forged steel construction. LONGER SERVICE LIFE: Prevent rust build-up with Repel-TEK™ surface treatment for a longer life.

Select Right or Left

Product photos may not match the selected option. Please confirm your choice before adding to cart.

Enter your zip and we'll see if installation is available.

Request quotes from local installers at checkout
Compare options and choose the best fit for your install

Free Customer Loyalty Program

No Salesmen, Just Enthusiasts

Mevotech TTX Lower Control Arm and Ball Joint Assembly is a heavy-duty replacement suspension part engineered with forged steel construction to meet or exceed OE specifications for demanding truck use.

Fits: 2011 - 2019 GM 2500HD/3500HD
Brand: Mevotech
Best for: Work trucks handling towing or larger tire upgrades
Key features: Patented sintered bearings for longer-lasting toughness
Patented sealing ring locks boot onto ball joint housing to block contaminants
Slotted castle nut and snap cotter pin for quick installation
180 degree SAE grease fitting included for easy servicing
Upgraded rubber bushings with knurling for secure sub-frame attachment
Application-specific ball stud system with larger sphere
Pre-applied nylok thread adhesive for vibration-resistant fasteners
Forged steel construction meeting or exceeding OE specifications
Repel-TEK surface treatment to prevent rust build-up
Key specs: 180 degree SAE grease fitting

If you have been upgrading the suspension of your truck for more lift or bigger tires, you are going to be putting some added stress on areas of your truck that might not be able to handle it. Do you trust your axle, steering, and suspension not to break at the worst possible time?

Whether upgrading or replacing parts on your diesel truck, it pays to get parts that can handle the everyday stresses of your truck's life. That part broke for a reason, so why grab an equal or lesser quality item only to replace it again? Mevotech's TTX line of truck parts is designed and engineered to be the strongest, most durable parts on the planet. TTX is made for working vehicles that handle what's thrown at them. Plus, they are all made with innovative Labor Saver^tm designs, tools, and hardware, so you know that installation is going to be easy enough that you won't mind replacing it a second time.

Maximum quality on Mevotech TTX control arm assembly means you get:

MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings.
LOCKS OUT CONTAMINANTS: Ensure a superior seal with a patented sealing ring that permanently locks the boot onto the ball joint housing.
QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific slotted castle nut & easy snap cotter pin provided.
SIMPLE TO SERVICE: Make servicing a snap with the 180 degree SAE grease fitting included.
THE ULTIMATE HIGH-PERFORMANCE DESIGN: Experience higher performance from upgraded rubber bushings with knurling that secures the control arm bushing to the sub-frame.
LARGER SPHERE DESIGN: Optimize performance with an application-specific ball stud system with larger sphere.
A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied nylok thread adhesive.
OPTIMAL PERFORMANCE: Meet or exceed OE specifications with forged steel construction.
LONGER SERVICE LIFE: Prevent rust build-up with Repel-TEK™ surface treatment for a longer life.

Vehicle Fitment

2011 - 2019 GM 2500HD/3500HD

WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

About Mevotech

Mevotech has been supplying parts professionals since 1982 and is an engineering company that works to optimize part design for durability and ease of installation. With 12 patented chassis technologies and over a thousand first-to-market exclusives, Mevotech's innovations meet tough aftermarket challenges head on. Whether you need to replace your ball joints, tie rods, or other steering and driveline components, Mevotech has your back!