• Cart

Quick Ship
SKU #: HSM-213004 MPN #: 213004

H&S Motorsports Coolant Pipe Conversion Kit 13-18 Ram 6.7L Cummins

$130.00
Get 130 points in loyalty rewards
Description
Clean up your engine bay and make servicing your Ram 6.7L Cummins much easier with the H&H Motorsports Coolant Pipe Conversion Kit. The upper coolant pipe in your Cummins is not only ugly, it also interferes with some aftermarket components making it difficult to service your engine. This kit comes complete with a billet anodized adapter, anodized 90-degree fitting, plastic Y-pipe coupler, and all hose clamps and hardware for a complete install. This kit is designed for trucks that have converted to a 2ng gen turbo swap and may not be compatible with the stock VGT turbo. If you are attempting to install this kit on a truck outfitted with a VGT turbo, additional steps may be required to ensure proper coolant flow to the turbo and other cooling systems.

Enter your zip and we'll see if installation is available.

  • Request quotes from local installers at checkout
  • Compare options and choose the best fit for your install

Clean up your engine bay and make servicing your Ram 6.7L Cummins much easier with the H&H Motorsports Coolant Pipe Conversion Kit. The upper coolant pipe in your Cummins is not only ugly, it also interferes with some aftermarket components making it difficult to service your engine. This kit comes complete with a billet anodized adapter, anodized 90-degree fitting, plastic Y-pipe coupler, and all hose clamps and hardware for a complete install. This kit is designed for trucks that have converted to a 2ng gen turbo swap and may not be compatible with the stock VGT turbo. If you are attempting to install this kit on a truck outfitted with a VGT turbo, additional steps may be required to ensure proper coolant flow to the turbo and other cooling systems.

Vehicle Fitment
2013-2018 Dodge 6.7L Cummins
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
KIT CONTENTS:
  • Billet anodized adapter
  • Black anodized 90-degree fitting
  • Plastic y-pipe and coupler
  • Hose, clamps, and hardware
FITMENT NOTE:
  • This kit was designed for use with H&S 2nd Gen Turbo Swap kit. It may or may not be compatible with a stock VGT turbo. If you are attempting to install this kit on a truck outfitted with a VGT turbo, additional steps may be required to ensure proper coolant flow to the turbo and other cooling systems. 
About H&S Motorsports
H&S Motorsports is a company based in St. George, Utah that is driven towards finding short comings in a vehicle's factory construction that becomes a limiting factor in power and/or reliability, and upgrading these ailments. The crew at HSM are undoubtedly extremely passionate and dedicated towards diesel performance.

However, its not just about building power, its about building additional reliability at the same time. For instance, their intercooler pipe upgrade for 6.7L Powerstrokes is a great solution for the failure prone factory plastic unit that are equipped on these trucks from the factory. While this product may not add an additional 100 horsepower to your truck, it solves a widely known issue that can not only limit your power building potential, but could also leave you stranded on the side of the road.

Conversely, products such as their dual high pressure fuel kit for LML Duramax's immediately add power when paired with other fueling upgrades, as the single factory CP4 injection pump is a major limiting factor on these trucks when trying to build power levels above stock. And because you're adding a second pump to the system, it makes the factory pump work at a much lower load level, meaning it will also last substantially longer.

Overall rating: 3.0 / 5 from 2 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Trash

"The included plastic fittings melted and left me stranded while working."

Daniel E. (1/5)

Great product! A one piece

"Great product! A one piece preformed hose from heater core to adapter would be nice though. Advertise more and you’re guaranteed to sell more. I had to look everywhere to find this kit for multiple trucks"

Blayne Y. (5/5)

Q&A

Are the fittings for a 5/8" hose? On the bolt in fitting, is the hole an NPT, if so, what size? Thank you in advance for the information.
The hose barb fittings are for 5/8 hose yes. This kit is intended for use on 13-18 Cummins truck that no longer have the factory Holset turbo.
do you the parts to use it on vgt turbo
No, this kit is only compatible with trucks that have been swapped to a 2nd‑gen non‑VGT turbo. It will not work with VGT turbos.