SKU #: DCI-ARBCOMPKIT-1722 MPN #: DCI-ARBCOMPKIT-1722

Dirt Church Dual ARB Compressor Kit 17-22 Ford F-250 / F-350 SuperDuty

Name: Dirt Church Dual ARB Compressor Kit 17-22 Ford F-250 / F-350 SuperDuty
Brand: Dirt Church Industries
Price: 599.95 USD
Availability: InStock

$599.95

Get 599 points in loyalty rewards

Dirt Church Dual ARB Compressor Kit for 17-22 Ford F-250 and F-350 SuperDuty

Description

For Ford SuperDuty owners, finding a suitable space under the hood to mount the twin ARB compressor can be a challenge. Ford maximizes every square inch of available space, leaving limited options for compressor placement. Relocating the factory bottle jack with the supplied hardware, cleared up enough room to mount the compressor and provided a secure mounting location for the compressor. In addition, it allowed for additional storage of airlines and other commonly used air tools. This kit is 100% complete with very detailed installation instructions. Six gauge duplex marine grade wiring is cut to length, properly crimped terminals, heat shrink tubing installed, 80 Amp fuse breaker, powdercoated 3/16" thick steel brackets, 25 foot airline, fittings, hoses, couplers, 1/4" air line, as well as a hammer lug crimping tool provided that will allow you to crimp the final two terminals on your end. Trucks these days are very expensive and time is valuable.This is not a half finished kit that required the customer to spend half the day driving around sourcing parts to finish out this product. This kit can be installed by the average person in their garage with basic hand tools. Installation time will take ~4 hours and utilizes the factory up fitter switches for operation. This kit will is 100% complete with the exception of the ARB Twin Motor 12V Air Compressor PN-CKMTA12, excluding the compressor no additional sourcing of parts is required for installation.

Choose add-ons

Add ARB Twin Motor Onboard 12V Air Compressor +$659.95

Enter your zip and we'll see if installation is available.

Request quotes from local installers at checkout
Compare options and choose the best fit for your install

Free Customer Loyalty Program

No Salesmen, Just Enthusiasts

For Ford SuperDuty owners, finding a suitable space under the hood to mount the twin ARB compressor can be a challenge. Ford maximizes every square inch of available space, leaving limited options for compressor placement.

Relocating the factory bottle jack with the supplied hardware, cleared up enough room to mount the compressor and provided a secure mounting location for the compressor. In addition, it allowed for additional storage of airlines and other commonly used air tools.

This kit is 100% complete with very detailed installation instructions. Six gauge duplex marine grade wiring is cut to length, properly crimped terminals, heat shrink tubing installed, 80 Amp fuse breaker, powdercoated 3/16" thick steel brackets, 25 foot airline, fittings, hoses, couplers, 1/4" air line, as well as a hammer lug crimping tool provided that will allow you to crimp the final two terminals on your end.

Trucks these days are very expensive and time is valuable.This is not a half finished kit that required the customer to spend half the day driving around sourcing parts to finish out this product. This kit can be installed by the average person in their garage with basic hand tools. Installation time will take ~4 hours and utilizes the factory up fitter switches for operation.

This kit will is 100% complete with the exception of the ARB Twin Motor 12V Air Compressor PN-CKMTA12, excluding the compressor no additional sourcing of parts is required for installation.

Vehicle Fitment

2017-2022 Ford F-250 / F-350 SuperDuty / Crew Cab

WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

KIT INCLUDES:

Detailed Installation Instructions
6 Gauge Marine Grade Wiring Cut to Length
Properly Crimped Terminals
Heat Shrink Tubing Installed
80 AMP Fuse Breaker
Powder Coated 3/16" Thick Steel Bracket
25ft Airline / 1/4" airline
Fittings, Hoses, Couplers, Hammer Lug Crimping Tool

KIT DOES NOT INCLUDE:

ARB Twin Motor Air Compressor PN-CKMTA12

IMPORTANT FITMENT NOTE:

Fits Crew Cab Models Only

About Dirt Church Industries

Welcome to Dirt Church Industries, where a lifelong passion for the automotive, off-road, and outdoor industries comes to life through innovative solutions that address real-world challenges. With roots embedded in the garage, where the owner first learned the ropes holding a flashlight for their dad, their commitment to quality and functionality is deeply ingrained. Every product DCI offers is crafted with precision and dedication, reflecting the extensive experience and genuine love for the industry.
The journey of Dirt Church Industries began during a summer expedition in 2021. Riding a Husky 501 and KTM 500 dirt bike along the Idaho Back Country Discovery Route, they explored the vast state using forgotten dirt roads, logging routes, and minimizing asphalt encounters. Embracing the ethos of self-sufficiency, they carried all their essentials on their bikes as the two ventured northbound.
A pivotal moment occurred in Missoula, Montana, where they stopped to fuel up and enjoy lunch while savoring the exceptional beer crafted by Dirt Church Brewing. The name resonated with the essence of their journey, encapsulating adventure, the pursuit of the unknown, and the realization that the journey itself is the destination.
DCI's commitment to excellence extends to its product lineup, proudly 100% manufactured in the USA. At Dirt Church Industries, they offer a diverse range of solutions, from onboard air compressor kits tailored for 2017+ Ford pickups to shop and garage upgrades, including tool chests, fabrication tools, and table kits for toolboxes. Embracing their love for dirt bikes, they also provide whip flag kits for dirt bikes and headlight knob extensions specifically designed for GasGas, KTM, and Husqvarna brands. On a journey where passion meets innovation, join Dirt Church Industries in conquering the challenges of the automotive and outdoor world.