SKU #: II- 227414 MPN #: 227414

Industrial Injection S467.7 2nd Gen Turbo Kit 03-07 Dodge 5.9L Cummins

$3,409.50

Get 3409 points in loyalty rewards

☆☆☆☆☆ (0)

Industrial Injection S467.7 2nd Gen Turbo Kit 03 07 Dodge 5.9L Cummins

Description

The factory turbo found on the 03-07 Cummins is capable of supporting sub-450 horsepower levels. Above this point, it is being oversped that will result in failure, as well as the fact it simply cannot supply enough air to support horsepower levels above this point. Further, the placement of the factory turbo is not positioned in an ideal position as its centered on cylinders four and five as opposed to three and four, resulting in the front cylinders running hotter than the rear. So, what's the fix? Easy, this turbo and installation kit from Industrial Injection to improve airflow and square the turbo on the engine! And now, lets talk about the turbo. Industrial Injection has done a LOT of research on turbo sizing. This particular S467 on a 5.9L will work best when used in conjunction with custom tuning and a moderately sized set of injectors for power levels above 600 rear wheel horsepower to deliver superb street manners and enough airflow to even kill it at the track. Turbo Options - The standard turbo kit will utilize a 1.10 A/R exhaust housing which is great for maximum boost levels and low drive pressure. However, if you're running minimal injector size (around 100), oversized tires, 3.42 or 3.73 gears, etc., you would be better suited to run a smaller A/R ratio, such as a 0.90, to actually increase drive pressure to assist in turbo spool. But if you're somewhere in the middle, say running 150 horsepower injectors, 35" tires, 3.73 gears, and daily drive the truck, you may be best suited for the 1.00 A/R housing. Further, for those that want the ultimate in spool, Industrial has a modified compressor cover, they have termed their "Quick Spool" compressor cover that utilizes the same FMW Compressor Wheel as the standard cover, but is designed to be super responsive for great daily driving manners. And for those that would prefer to sacrifice a small amount of bottom end response in favor of massive mid and top end airflow, they offer up their Race Cover. Big power, big airflow, big results. Everything about this complete turbo kit from the professionals at Industrial Injection will deliver on its promise to deliver you the power and heat reduction you're after.

Free Customer Loyalty Program

No Salesmen, Just Enthusiasts

The factory turbo found on the 03-07 Cummins is capable of supporting sub-450 horsepower levels. Above this point, it is being oversped that will result in failure, as well as the fact it simply cannot supply enough air to support horsepower levels above this point. Further, the placement of the factory turbo is not positioned in an ideal position as its centered on cylinders four and five as opposed to three and four, resulting in the front cylinders running hotter than the rear.

So, what's the fix? Easy, this turbo and installation kit from Industrial Injection to improve airflow and square the turbo on the engine!

And now, lets talk about the turbo. Industrial Injection has done a LOT of research on turbo sizing. This particular S467 on a 5.9L will work best when used in conjunction with custom tuning and a moderately sized set of injectors for power levels above 600 rear wheel horsepower to deliver superb street manners and enough airflow to even kill it at the track.

Turbo Options - The standard turbo kit will utilize a 1.10 A/R exhaust housing which is great for maximum boost levels and low drive pressure. However, if you're running minimal injector size (around 100), oversized tires, 3.42 or 3.73 gears, etc., you would be better suited to run a smaller A/R ratio, such as a 0.90, to actually increase drive pressure to assist in turbo spool. But if you're somewhere in the middle, say running 150 horsepower injectors, 35" tires, 3.73 gears, and daily drive the truck, you may be best suited for the 1.00 A/R housing. Further, for those that want the ultimate in spool, Industrial has a modified compressor cover, they have termed their "Quick Spool" compressor cover that utilizes the same FMW Compressor Wheel as the standard cover, but is designed to be super responsive for great daily driving manners. And for those that would prefer to sacrifice a small amount of bottom end response in favor of massive mid and top end airflow, they offer up their Race Cover.

Big power, big airflow, big results. Everything about this complete turbo kit from the professionals at Industrial Injection will deliver on its promise to deliver you the power and heat reduction you're after.

NOT LEGAL FOR SALE OR USE IN CALIFORNIA

Vehicle Fitment

2003-2007 Dodge 5.9L Cummins

Features and Options:

Street / Track Performance
Lower EGT's
Budget Friendly
Complete Installation Kit
Custom S&B Designed Cold Air Intake
Injector Upgrades Recommended

About Industrial Injection

With one of the most recognized names in the diesel performance industry, Industrial Injection has earned their reputation.

INDUSTRIAL INJECTION DIESEL PERFORMANCE

Industrial Injection's innovative product line has proven itself, over and over again, on the street and the strip. Diesel Power Products carries the complete line of turbos, twin turbos, injectors, stock and modified P7100's, stock and Hot Rod Vp44's, stock and modified Cp3 injection pumps and dual feed lines for both Duramax and Cummins. Industrial Injection is a family operated business, founded by Brady Williams, in 1985 and currently owned and operated by his wife and sons. Bradys initial start in fuel injection was with a local shop, mopping floors after school. By 25, Brady was a master technician at the Association of Diesel Specialists for all manufactures of turbochargers and fuel equipment. With hard work, sacrifice, and a little help from fate, 30-year-old Brady opened the doors to Industrial Injection.

Industrial Injection received its name from servicing construction, agricultural, and mining equipment, as well as over the road truck engines. It was primarily an agricultural and industrial fuel shop. However, when Ford, Dodge and GM decided to power pickup trucks with diesel engines, Industrial Injection was forever changed.

SHOP INDUSTRIAL INJECTION AT DPP!

We at Diesel Power Products have been an authorized Industrial Injection dealer for well over a decade. Not only do we stock in-house a ton of Industrial Injection turbos, injectors, pumps, and more, we also have the ability to ship directly from Industrial Injection to you in the event we are out of stock due to our longtime relationship with them. If you have any questions about which Industrial Injection part is right for you and your build, don't hesitate to get a hold of us and we'd be happy to help.