Lotta flow
"Pump is nice, strong, and surprisingly quiet"
Cummins
Shop All
SKU #: FPE-34562
MPN #: FPE-34562
Fleece Performance PowerFlo Lift Pump In-Tank 11-24 Ram 6.7L Cummins
Description
Fuel flow is essential for your Cummins to run the way you want it to under high-demand situations. If fuel flow gets too low you can find yourself in fuel starvation mode which puts strain on your injection pump, throttle response falls, and could put you and your pickup into unsafe conditions. Install the Fleece Performance PowerFlo Lift Pump and start feeding your engine again. This in-tank lift pump is the latest in OEM replacement performance and is the only one capable of supporting up to 800hp! Put reliability back into your fuel system, keep strain off your injection pump, increase fuel system longevity, and also better fuel economy by installing this lift pump today.
DIRECT OEM IN-TANK REPLACEMENT: The PowerFlo Lift Pump retains the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines. All of these are installed in less than half the time of other high flow lift pumps.
DUAL GEROTOR:Two is always better than one, and the PowerFlo delivers two OEM quality gerotor pumps, increasing flow capacity and increased reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.
SEAMLESS INTEGRATION:The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s needs.
Replaces OE Part Number 68490266AA
Enter your zip and we'll see if installation is available.
- Request quotes from local installers at checkout
- Compare options and choose the best fit for your install
About WrenchConnected
WrenchConnected is an independent installation marketplace operating in partnership with Diesel Power Products.
How it works
After checkout, we route your vehicle info and part SKU to verified installation shops near you. Local installers review the job and submit competitive bids; you pick the shop you want based on price, reviews, and availability. Your name and email stay private until you select an installer.
Pricing
You pay for the bid from your preferred shop. The full amount is shown before you confirm — installers cannot add charges without your written consent. Payments are processed securely by Stripe.
Your privacy
During bidding, shops see only your service ZIP code, vehicle year/make/model, and the part SKU — not your name, email, or address. Only the shop you select receives your contact details after payment. We never sell your personal information.
More detail at wrenchconnected.com.
SPECIFICATIONS:
- Operating Pressure: 18-20 psi at idle
- For MY 2020 and up; this pump will not work with the factory installed 50-gallon fuel tank option
- Not for use with cab & chassis applications
About Fleece Performance Engineering
Browse Fleece Performance Engineering Parts Online by Make, Model, and Year.
Fleece Performance Engineering is a customer-centric diesel performance company that specializes in the development and manufacturing of innovative and extremely forward-thinking products to improve upon the performance and reliability of your Cummins, Duramax, or Powerstroke. Originally operating from a shop on their family farm, they have now grown to a full-scale operation that excels in air and fuel-related components for light-duty diesel. A continuous focus on product quality and the creation of new design principles before the competition is what keeps Fleece Performance growing by leaps and bounds year after year and at the forefront of the winners circle. Many know Fleece for its line of Cheetah Turbos, PowerFlo Lift Pumps, and 10mm Stroker Pumps, but it goes far beyond! From the simple, yet widely popular exhaust manifold stud kits that eliminate the troublesome factory manifold hardware to full-blown race engines via their Freedom Racing Engines division, they are truly a "one-stop shop!" And no, Fleece isn't "just" for the hot rod diesel market, they've got kits and components for every level of diesel truck owner.
TIMELINE OF FLEECE PERFORMANCE ENGINEERING:- 2008: Fleece Performance Engineering was established in North Salem, IN by Brayden and Chase Fleece. Both had a passion for continuously innovating and improving upon products already on the market. Brayden's 2004.5 LLY Duramax became the test bed to develop the TurboBrake and Duramax Cheetah, while Chase's 2002 Cummins was one of the first Cummins pickups to integrate an Allison Transmission.
- 2012: Fleece Performance upgrades both facility and location by relocating to Nitro Alley in Brownsburg, IN situated among some of the top racing leaders in the world.
- 2014: Fleece Performance acquires the area's premier engine machine shop, Freedom Racing Engines. The acquisition enables Fleece Performance to expand the engine development program and product offerings. Today, Fleece Performance and Freedom Racing Engines build some of the most competitive engines in the industry.
- 2018: Fleece Performance breaks ground on a new 75,000 sq. ft. facililty in Pittsboro, IN.
- 2019: Fleece Performance and Freedom Racing Engines relocates to its new facility in Pittsboro, IN. The all new headquarters provides additional space for product development, production and work areas, assembly and testing, a larger warehouse, as well as four engine dynamometers, and two-story office space.
- 2020: Fleece Performance receives ISO9001:2015 Certification.
- 2021: Fleece Performance Engineering was voted as one of the Best Places to Work in Indiana by the Indiana Chamber of Commerce.
- 2022: Fleece Performance Engineering was voted again as one of the Best Places to Work in Indiana by the Indiana Chamber of Commerce.
As always, if you have any questions about which Fleece turbo, fuel, engine, or other product is right for you, do not hesitate to give us a call and we would be happy to assist.
Blog
April 28, 2026
A lift pump is one of those diesel upgrades that doesn’t always get much attention, but it...
Read MoreShould You Install a Lift Pump?
December 12, 2025
A lift pump is the part of the fuel system that moves diesel from the tank and...
Read MoreWhat Does a Lift Pump Do? Fuel System Guide for Diesel Trucks
June 12, 2026
The diesel particulate filter (DPF) on your Cummins engine traps soot before it leaves the tailpipe. Over...
Read MoreCummins DPF Cleaning: Signs, Methods & Tips
June 12, 2026
P2509 flags when your Cummins ECM isn't seeing stable voltage coming from the battery and charging system....
Read MoreP2509 Cummins Code: Causes, Symptoms & Fixes
Overall rating: 4.9473686 / 5 from 19 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["install","buy","pump","truck","unit","offers","upgrade"].
Review highlights
Reviews
Have absolutely no regrets at
"Have absolutely no regrets at all"
Fleece Lift Pump Race Me Delete 5" Straight Pipe
"Well so far so goods it was an inevitable replacement upgrade my truck is at thee130k mark so the things that are expected to be wearing out are at that point now as soon as I started enjoying my truck the stock turbo went out so the fleece cheetah upgrade is already in route coming from you guys once that's in I guess that's when we will really feel the benefits of both replacements to compliment the delete"
Easy install, everything was plug
"Easy install, everything was plug and play, good upgrade fir when your stick pump goes out"
Fleece
"Installed fleece cheetah and needed a new pump do to failed level sensor. Lift pump is built well. Easy to install. Thankful for being able to buy local at DPP. Replaced o. e that came out in pieces."
Awesome upgrade!!
"So far so good. It was an easy install going into an S&B 55-gallon tank and seems to work great. You can feel more responsiveness in the pedal on acceleration. I do sometimes feel a weird shudder that I didn't before. . . almost like a flutter. . . hard to explain but it wasn't there before so I have to assume its the pump. It works so hopefully it stays working."
Nicely packaged, easy install &
"Nicely packaged, easy install & & cured my low pressure issues with weak old stock pump! Ready for my Fleece 10mm stroker pump next!:sign_horns|type_2:"
Upgraded fuel system
"Had a lack of power in my ram 3500 and occasional sputter at certain speed on slight grade. Replace original pump with Fleece lift pump and truck runs strong now. More power and way smoother delivery. You won't regret buying this pump especially if you have an old weak pump still running your vehicle."
Ordering the product was easy.
"Ordering the product was easy. As alway Ben at DPP was more than happy to answer all of my questions. The pump showed up in a couple of days and I would say the pump was packed by someone who actually cared. Very well protected from any bumps on the way out to me. Now the pump… it makes a HUGE difference. I recently did some upgrades and was having trouble keeping the check engine light off my dash due to low fuel psi and the Proflow keeps up with the demand no problem at all! Install was a breeze on this unit. And most importantly it definitely helps with the pedal lag on the Cummins. If you are running a tune or perhaps a larger turbo you know how bad the lag is. Don’t hesitate, it is a fantastic product! Even in the factory settings it feels like the truck is running a higher level tune. Just order one it’s worth it!"
Very easy install
"Was the easiest install I have ever done"
Q&A
- Will this work if I have the Fass fuel filter system drop in series
- This will work in conjunction with the Fass drop-in kits.
- Would this work with the aftermarket 50 gallon fuel tanks available for the Ram 2500 such as Titan? I would imagine it would since those tanks utilize the same factory lift pump used in the OEM tank however I am looking for a confirmation. Thank you!
- Not that I'm aware of, stock tanks only. -Sands
- Would this fit a 2010 ram 2500? Also, is there any less advantage of this over a fass or airdog frame setup?
- There is a specific one for 2010 Rams it is advertised as 2010 only. It is a much cleaner install then the other options and have proven to be very reliable. The rest of the 4th gen fuel system is actually really good as far as filters. If you are trying to make more power though you need this.-Sands
- will this fit the 2016 Ram 3500 c&c with 50 gallon tank Fleece Performance PowerFlo Lift Pump In-Tank Pump Assembly
- This will not work in the C&C applications no. - AW
- What psi does this pump come set at from fleece?
- 15psi. SA