FASS Titanium Signature Series Fuel Lift Pump 89-93 Ram 5.9L Cummins

The Titanium Series fuel system from FASS has long been hailed as the benchmark for reliable lift pumps for your 1st Gen Cummins. And with over two years in development, FASS improved upon this design and released their Signature Series Titanium, featuring new advancements, including their Revolutionary Whisper Technology for a dependable pump without the noise. The Titanium Signature Series diesel fuel lift pump was engineered by FASS Fuel Systems to be the top-performing, longest-lasting, and most reliable aftermarket filtration system in the diesel industry. Rated at 100 or 165 GPH, backed by a limited lifetime warranty, this Titanium lift pump is capable of supporting your Dodge 12 Valve Cummins diesel engine with enough fuel for multiple fueling upgrades up to 900 horsepower. A Titanium Series lift pump also offers advanced filtration benefits that will help protect your injection systems, effectively extending the life of both your Bosch Injection Pump and Bosch Diesel Injectors. These benefits include an improved filtration rating of 3 Microns, a built-in water-separation filter, and FASS Fuel Systems' patented air/vapor removal process. Aftermarket lift pumps are important for both daily drivers and high-performance applications when looking to improve either fuel economy or increase horsepower/torque. FASS Whisper Technology (FWT) was engineered to meet the stringent demands of today's quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel System's high-quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a "whisper" while at the same time increasing fuel flow rates. Performance Radius Cuts (PRC) are an advanced machining technique used to improve fuel flow through the diesel lift pump by creating smooth, flowing cuts in the aluminum housing. This prevents the reintroduction of air and vapor into the fuel and also prevents stagnant fuel pockets from forming at the corner of a 90-degree bend. FASS Fuel Systems Titanium Series Diesel Fuel Pumps are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts; lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions, and reintroduce air into your fuel. Mass Flow Return (MFR) technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine and returning the fuel that's not yet needed back to the tank after it has been passed through the filtration process, removing dirt, air, vapor, and water.This means your fuel is constantly being moved and cleaned, ensuring your diesel truck always has the freshest, cleanest fuel possible. FLOW RATE (GALLONS PER HOUR) EXPLAINED: 95GPH is for stock to 600HP applications. This is the kit for most people. 165GPH is for 600HP to 900HP applications. IMPORTANT NOTES: You do not want to run a pump with a higher gallon per hour rating than your engines horsepower or the life of the FASS fuel pump will be greatly reduced. Pump noise is greatly increased with larger-flow pumps. All FASS Fuel Air Separator Systems and the High Performance Fuel Pump systems are complete kits. They come with the hoses, fittings, mounting hardware, etc to do the job. Everything needed to complete the install should be included, except tools and wire ties.