SKU #: AFE-46-10076 MPN #: 46-10076

AFE Power BladeRunner Intake Manifold & Heater Relocation Kit 07.5–18 Ram 2500/3500 6.7L Cummins

Name: AFE Power BladeRunner Intake Manifold & Heater Relocation Kit 07.5–18 Ram 2500/3500 6.7L Cummins
Brand: AFE
Price: 593.0 USD
Availability: InStock

$593.00

Get 593 points in loyalty rewards

aFe BladeRunner 46-10076 intake manifold and heater relocation kit with gaskets and hardware

Black aFe BladeRunner intake manifold with the 750-watt ribbon-style heater mounted at the inlet

aFe BladeRunner intake manifold kit laid out with the block-off plate, gaskets, and mounting bolts

Close-up of the ribbon-style grid heater and red gasket at the aFe BladeRunner manifold inlet

aFe BladeRunner intake manifold and heater relocation kit overview for the 2007.5–2018 6.7L Cummins

aFe BladeRunner intake manifold and heater kit graphic showing a Ram truck and dyno test gains

Description

On the 6.7L Cummins, the factory grid heater sits downstream of the EGR feed, where it can collect exhaust deposits. The aFe Power BladeRunner Intake Manifold & Heater Relocation Kit uses a block-off plate at the original heater location and mounts a new 750-watt ribbon-style heater ahead of the manifold, before recirculated exhaust enters the intake. That placement helps keep deposits off the new heater. The heater matches the factory unit’s power rating, and the factory EGR valve stays in place. You can replace the intake manifold and relocate the grid heater in the same job. The kit includes the 46-10072-1 BladeRunner manifold, ribbon-style heater, block-off plate, and all required hardware and gaskets. It works with factory and aFe Power charge pipes. The cast A356-T6 aluminum manifold uses patented internal vanes to split incoming air into multiple streams and increase air velocity. Its internal bolt design helps improve airflow and maintain a tight seal. aFe reports dyno gains of 11 horsepower and 27 lb-ft of torque. Important emissions note: This kit is not CARB exempt. It is unavailable for sale in California.

Enter your zip and we'll see if installation is available.

Request quotes from local installers at checkout
Compare options and choose the best fit for your install

Free Customer Loyalty Program

No Salesmen, Just Enthusiasts

On the 6.7L Cummins, the factory grid heater sits downstream of the EGR feed, where it can collect exhaust deposits. The aFe Power BladeRunner Intake Manifold & Heater Relocation Kit uses a block-off plate at the original heater location and mounts a new 750-watt ribbon-style heater ahead of the manifold, before recirculated exhaust enters the intake. That placement helps keep deposits off the new heater. The heater matches the factory unit’s power rating, and the factory EGR valve stays in place.

You can replace the intake manifold and relocate the grid heater in the same job. The kit includes the 46-10072-1 BladeRunner manifold, ribbon-style heater, block-off plate, and all required hardware and gaskets. It works with factory and aFe Power charge pipes. The cast A356-T6 aluminum manifold uses patented internal vanes to split incoming air into multiple streams and increase air velocity. Its internal bolt design helps improve airflow and maintain a tight seal. aFe reports dyno gains of 11 horsepower and 27 lb-ft of torque.

Important emissions note: This kit is not CARB exempt. It is unavailable for sale in California.

NOT LEGAL FOR SALE OR USE IN CALIFORNIA

Manuals and Guides

INSTALL INSTRUCTIONS

Vehicle Fitment

2007.5–2018 Ram 2500/3500 6.7L Cummins

WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

FEATURES & BENEFITS

Relocates the intake heater upstream of the EGR feed
750-watt ribbon-style heater matches the factory heater’s power rating
Cast A356-T6 aluminum BladeRunner intake manifold
Multiple Directional Vane (MDV) design guides airflow through the manifold
Five auxiliary port pads, two tapped for 1/8-inch NPT fittings
Retains the factory EGR valve
Compatible with factory and aFe Power charge pipes
Includes a grid heater delete plate, mounting hardware, and gaskets

About AFE

AFE POWER PERFORMANCE PARTS AND ACCESSORIES

Since its founding in 1999, AFE Power (Advanced Flow Engineering) has been a leader in diesel performance. Built to improve airflow, fuel efficiency, and overall vehicle power, AFE Power products are engineered to handle the demands of diesel enthusiasts and professionals alike.

From AFE cold air intakes to high-performance exhausts, AFE Power offers a complete lineup of parts to boost your truck’s performance. Whether you’re running a Cummins, Powerstroke, or Duramax engine, Diesel Power Products has a full range of AFE Power parts to maximize your vehicle’s potential.

AFE COLD AIR INTAKE SYSTEMS FOR MAXIMUM AIRFLOW

One of AFE Power’s best-known products is the AFE cold air intake system, designed to increase airflow and improve combustion efficiency. With options for both open and closed systems, AFE cold air intakes are built to optimize horsepower and throttle response. For those aiming to push their trucks to the limit, these intakes provide the airflow needed for consistent, powerful performance.

AFE FILTERS FOR DIESEL ENGINES

AFE filters are made with various filter media to suit different driving environments. Choose from the Pro 5R, Pro 10R, Pro-GUARD 7, and Pro DRY S filters to achieve the right balance of airflow and filtration. Engineered with multiple layers of protection, AFE filters capture finer debris while maintaining excellent airflow, extending your engine's life and efficiency.

AFE POWER EXHAUST SYSTEMS FOR ENHANCED PERFORMANCE

Upgrading to an AFE Power exhaust system reduces backpressure and increases exhaust flow, allowing for improved performance and fuel efficiency. Built with premium materials, these exhausts provide a deeper sound without compromising factory emissions. AFE Power’s exhaust options help you achieve a cleaner, more efficient burn while adding an aggressive tone to your truck’s performance.

ABOUT ADVANCED FLOW ENGINEERING (AFE)

Headquartered in Corona, California, Advanced Flow Engineering (AFE) is known for its high-tech, in-house manufacturing and testing facilities, which include capabilities like CNC machining, CAD design, dyno testing, and more. With a commitment to quality and innovation, AFE Power continues to push the boundaries in diesel performance parts, delivering products that meet the needs of today’s diesel enthusiasts.

SHOP AFE PARTS AT DIESEL POWER PRODUCTS

Diesel Power Products is proud to offer a comprehensive selection of AFE parts for diesel trucks. From cold air intakes and filters to exhaust systems and tuners, we carry everything you need to upgrade your diesel truck with high-performance AFE Power products. Our experts are here to help you find the right parts for your specific needs.