EVO Manufacturing 2.5" Element Lift Kit 20-23 Jeep Wrangler JL /Gladiator JT

Lift your Jeep Wrangler JL or JT Gladiator 2.5 inches with The EVO Manufacturing 2.5" Jeep JL/JT Element Lift Kit. Our main goal in developing this kit was to give a smooth ride on road and for moderate off-roading while giving additional lift. *MOJAVE: BILSTEIN shocks not compatible The JL Enforcer kits are specifically designed to lift your JL/JT and maintain compliant spring rate, and smooth ride quality. These kits come with a set of 2.5” Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL and JT Gladiator Level side to side and will maintain a unique and compliant ride quality. ELEMENT GEOMETRY CORRECTION: The benefit of EVO MFG's ELEMENT kit is the use of our front Overland Control Arm Brackets. When lifting your vehicle your control arms at ride height have a steeper angle towards the floor which can have some negative effect/chop in ride quality. With the use of the included Overland Control Arm brackets we relocate the front control arm mounting locations at the frame. In doing this when lifted we maintain factory flatter control arm angles and while minimal, we alleviate much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also, in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. The ELEMENT Kits are better suited for less hard off-road crawling and more light off road and on road use. EVO MFG JL/JT ELEMENT kits are upgradable down the road. These ELEMENT kits will fit up to a 37” tires on Rubicon Model JLs/JT's or 35” tires on Sahara and Sport/S. JEEP JL WRANGLER: 2.5” lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model. 2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Factory shocks can be reused with the optional EVO MFG Shocks Extensions kits. JEEP JT GLADIATOR: 2.5” Enforcer kits are Gladiator Mojave Compatible Factory shocks can be reused with the optional EVO MFG Shocks Extensions kits.  Mojave models have a larger shock bolt and different shock bracket on the front lower axle.  Therefore these extension can be mounted on a Mojave model Gladiator by a talented installer with fabrication ability.  Installation on a Mojave will require increasing/drilling/elongating etc. holes in bracket and 3/8” on lower hole. (Non Mojave Gladiators) Extensions can be used with stock shocks and no modifications required.  Simple bolt on. Element / Element HD Element kits come with plush ride coils for ideal riding normal truck builds with normal accessories (bumpers, winch, sliders etc). Element HD kits come with higher capacity coils that can be optioned for significantly/heavily accessorized Jeeps generally, "Overland" builds. Chose option of Shock Extensions to reuse your factory shocks after lifting or chose Bilstein shocks to receive new longer lift shocks. WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. Image may differ from actual product