SKU #: 9-105

Apoc Industries Front Adjustable Johnny Joint Control Arms 94-99 Dodge Ram 1500/2500/3500 4WD

$703.00

Get 703 points in loyalty rewards

Apoc Industries Front Adjustable Johnny Joint Control Arms 94-99 Dodge Ram 1500/2500/3500 4WD

Description

Upgrade your Dodge Ram's front suspension with APOC Front Adjustable Control Arms, engineered for stock-height trucks up to 6-inch suspension lifts. Built for daily driving, towing, demanding job sites, and off-road adventures, these heavy-duty control arms deliver the strength, precision, and adjustability your Ram deserves. Each set is equipped with Currie RockJock Johnny Joint® flex joints for exceptional articulation, reduced binding, and long-lasting durability. Key Features Height Range: Designed for stock-height trucks through 6" suspension lifts. Fully Adjustable: Easily correct caster angle and re-center the front axle on lifted trucks. Johnny Joint® Flex Joints: Premium Currie RockJock Johnny Joint flex joints provide maximum articulation, reduced bind, and smoother suspension travel. Threaded Adjustment Sleeves: Strong, dependable, and easy to fine-tune on or off the vehicle. Polyurethane Bushings: High-durometer bushings deliver quiet operation without the noise associated with heim joints. Heavy-Wall Steel Construction: Built to withstand daily driving, towing, and extreme off-road conditions. Direct Bolt-On Installation: Utilizes factory mounting locations with no cutting or welding required. Technical Specifications Material: Heavy-wall steel tubing Bushings: High-durometer polyurethane Adjustability: Threaded ends for precise length adjustment Lift Compatibility: Stock height through 6" suspension lifts Vehicle Fitment 1994-2001 Dodge Ram 1500 4WD* 1994-1999 Dodge Ram 2500 4WD 1994-1999 Dodge Ram 3500 4WD *The Dodge Ram 1500 transitioned to a new body style beginning in the 2002 model year. Installation Tools Required: Basic hand tools, floor jack, and jack stands Estimated Installation Time: Approximately 2-3 hours Installation Type: Direct bolt-on using factory mounting points Installation Notes: Adjust the control arms to match your suspension lift and achieve proper caster angle. A professional front-end alignment is recommended after installation. Hardware: Factory mounting hardware is reused during installation. If your original hardware is worn or damaged, a replacement hardware kit is available separately. Why Choose APOC Adjustable Control Arms? Purpose-built for lifted Dodge Ram trucks, APOC Adjustable Control Arms deliver superior suspension geometry, improved steering response, and exceptional durability. Whether you're towing heavy loads, conquering rugged trails, or simply improving the handling of your daily driver, these control arms provide the adjustability, strength, and ride quality needed to outperform generic alternatives.

Key Features

Height Range: Designed for stock-height trucks through 6" suspension lifts.
Fully Adjustable: Easily correct caster angle and re-center the front axle on lifted trucks.
Johnny Joint® Flex Joints: Premium Currie RockJock Johnny Joint flex joints provide maximum articulation, reduced bind, and smoother suspension travel.
Threaded Adjustment Sleeves: Strong, dependable, and easy to fine-tune on or off the vehicle.
Polyurethane Bushings: High-durometer bushings deliver quiet operation without the noise associated with heim joints.
Heavy-Wall Steel Construction: Built to withstand daily driving, towing, and extreme off-road conditions.
Direct Bolt-On Installation: Utilizes factory mounting locations with no cutting or welding required.

Technical Specifications

Material: Heavy-wall steel tubing
Bushings: High-durometer polyurethane
Adjustability: Threaded ends for precise length adjustment
Lift Compatibility: Stock height through 6" suspension lifts

Vehicle Fitment

1994-2001 Dodge Ram 1500 4WD*
1994-1999 Dodge Ram 2500 4WD
1994-1999 Dodge Ram 3500 4WD

*The Dodge Ram 1500 transitioned to a new body style beginning in the 2002 model year.

Installation

Tools Required: Basic hand tools, floor jack, and jack stands
Estimated Installation Time: Approximately 2-3 hours
Installation Type: Direct bolt-on using factory mounting points

Installation Notes:

Adjust the control arms to match your suspension lift and achieve proper caster angle.
A professional front-end alignment is recommended after installation.

Hardware: Factory mounting hardware is reused during installation. If your original hardware is worn or damaged, a replacement hardware kit is available separately.

Why Choose APOC Adjustable Control Arms?

Purpose-built for lifted Dodge Ram trucks, APOC Adjustable Control Arms deliver superior suspension geometry, improved steering response, and exceptional durability. Whether you're towing heavy loads, conquering rugged trails, or simply improving the handling of your daily driver, these control arms provide the adjustability, strength, and ride quality needed to outperform generic alternatives.

Vehicle Fitment

1994 - 1999 Dodge Ram 2500/3500 4WD
1994-2001 Dodge Ram 1500 4WD*
*The Dodge Ram 1500 transitioned to a new body style beginning in the 2002 model year.

WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

About APOC Industries

At APOC Industries, they believe exceptional vehicles deserve exceptional parts. Since 2014, they've been engineering and manufacturing premium suspension components, steering upgrades, fabricated lift blocks, light mounting solutions, and off-road accessories for truck and Jeep enthusiasts who demand uncompromising quality. Proudly built in the USA, every product is designed to deliver the strength, durability, and performance needed for everything from daily driving and towing to off-road adventures.

Headquartered in East Tennessee, APOC Industries designs, manufactures, machines, welds, powder coats, and ships many of its products in-house using high-quality, locally sourced materials whenever possible. By maintaining control over the entire manufacturing process, we're able to uphold strict quality standards, deliver exceptional value, and stand behind our products with confidence.

Engineered for Real-World Performance

Every APOC Industries product is developed with one goal in mind: helping drivers get the most from their vehicles. Whether you're installing a complete suspension system, upgrading your steering, improving towing stability, or adding off-road lighting, our components are engineered to provide precise fitment, dependable reliability, and long-lasting performance in demanding conditions.

Our growing lineup includes lift kits, control arms, track bars, fabricated lift blocks, traction bars, shackles, long arm systems, leveling kits, and premium mounting solutions for today's most popular trucks, SUVs, and Jeeps. Each product is rigorously designed to withstand harsh environments while delivering the confidence and performance enthusiasts expect.

Built in the USA

American manufacturing is at the core of everything we do. From precision machining and fabrication to powder coating and final assembly, our commitment to domestic production allows us to maintain consistent quality while supporting local suppliers and skilled craftsmanship. They don't just build parts they engineer solutions that are made to perform both on and off the road.

Why Choose APOC Industries?

Proudly engineered and manufactured in the USA
Premium suspension, steering, and off-road performance components
In-house design, fabrication, machining, and powder coating
Built for trucks, Jeeps, SUVs, and off-road enthusiasts
Designed for towing, overlanding, daily driving, and trail performance
Lifetime warranty on many products
Dedicated customer service and technical support

Whether you're building a capable off-road rig, upgrading your work truck, or improving your vehicle's performance and handling, APOC Industries is committed to delivering premium American-made components you can trust. From the shop floor to the trail, we build products that are engineered for strength, precision, and the confidence to tackle every road ahead.