AEV has proven that you don't need a monstrosity of a bumper to deliver superior front end protection, securely house a capable winch and still offer provisions for auxiliary lighting with their Premium Front Bumper for your Heavy Duty Ram. At first glance, many would think this is a factory bumper, and for good reason, as it precisely follows and matches the factory body lines, fully complementing the distinguishable Ram styling. Whether you use your truck for overlanding adventures, or just want a clean way to mount a winch, or none of the above, the AEV Premium Front Bumper is truly a cut above the rest.
AEV’s Front Bumper is robust and engineered to work just as hard as the truck it’s installed on. Massive ductile iron recovery points are rated to pass all OE load specifications and double as wear plates to slide over steep obstacles. A 4mm thick stamped steel face provides a superior level of protection.
AEV’s Front Bumper is fully compatible with ParkSense, a parking assist feature found on many higher trim levels. Sensor holes pre-drilled and the factory harness can be re-used, for a truly plug-n-play installation. Closeout plugs are included for trucks that do not have front ParkSense. An extremely durable, multi-stage e-coat and powder coat finish is used for the best possible corrosion resistance, and any abrasions from obstacles off-road can be easily touched-up using AEV Bumper Touch-Up paint. Additional hardware is also available so that this bumper can seamlessly fit on 4500 and 5500 models. All bumpers are proudly manufactured in the USA.
AVAILABLE OPTIONS:
Gas or Diesel Engine Shroud Options
HD Ram trucks are designed to work hard and tow heavy loads which makes proper engine cooling essential, especially in hot environments and higher elevations. Airflow underneath and through the bumper is critical due to the lower intercooler position on late-model Ram 2500/3500 trucks, so a unique intercooler shroud is supplied to ensure that there is no loss in cooling efficiency after the AEV Front Bumper is installed – something often overlooked in the aftermarket. Trucks equipped with a gasoline engine will receive a cooling shroud to help direct airflow to the radiator.
Bumper Corner Options
The outer wings of this bumper are available in two basic configurations. For those that are using the Premium front bumper with factory fenders, you will need the option for the Standard Corners. However, if you are or have already upgraded to AEV's exclusive HighMark Fender Flares, then you will want to opt for the corners built specifically to work in conjunction with these flares for a seamless fit and finish.
Winch Mounting Kit Options
What's a solid bumper setup without a capable winch? To accommodate several winch options, AEV gives you the option of several mounting kits for your winch (or no winch) of choice. If you opt for "No Winch Mount" no additional hardware will be included to either mount a winch, or cover the opening designed to mount the winch. However, if you choose "Winch Delete Kit" then you will receive AEV's Non-Winch Cover Plate Kit, a stamped steel block out plate to cover the space at the top of the bumper, with a molded plastic plate that will snap into the fairlead opening, as well as hold a front license plate.
Brush Guard
Bolt-on brush guard that replaces the lower tube assembly. Three inch main tube in the center and 2.25" tubing to protect the headlights. A great option for those looking for the most protection for the front of their truck.
IMPORTANT NOTE:
- Due to the size and weight of this product, it must be shipped via truck freight on a pallet and we must charge a $200 shipping fee. Please note we do not make a penny on the shipping, we are still losing money on it based upon the prices we are charging, but simply cannot ship this item free of charge.
Specifications
- ManufacturerAEV | American Expedition Vehicles
- MPNBP-RB2
- Fits 2019+ Ram HD 2500/3500/4500/5500
- Compatible with both gas and diesel applications
- Heavy duty ductile iron tow loops
- 4mm thick stamped steel face w/ 3/16" reinforcement
- 1/4" thick integrated winch mount accepts Warn 16.5ti, M12/M15 and Power Wagon Winches
- E-coated and powdercoated to maximum corrosion resistance
- Made in the USA
- Manufacturing Process: Stamped Steel
- Material: 4mm steel stampings, 3/16" steel reinforcement, 1/4" winch mount
- Coatings: E-coat, Polyester textured black powder coat
- Application: 2019+ Ram 2500/3500/4500/5500
- Weight: 250 lbs.
- Made In: United States of America
- Due to the size and wieght of this product, we cannot offer free shipping and require a flat rate freight charge which will be added at checkout.
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
What is "Freight Shipping Cost"?
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
AEV Premium Front Bumper 19-24 Ram 2500 / 3500 / 4500 / 5500
Quantity: 0
Cart Total$0000.00