Have you come to the same conclusion that factory installed tie downs are just never in the right location for your particular needs? End these woes with this tie down assembly from Mac's.
Mac's Double Stud Anchor Plate Assembly lets you add a tie-down point virtually anywhere, but are designed specifically for their higher load capacity double stud fittings, such as the included VT-2000 Double Stud Tie-Down Ring. This combination offers nearly twice the holding power (5,000lb Minimum Breaking Strength) as their Single Stud Anchor Plate Assembly. This is a great solution when securing heavy loads where a full length track system is not desired.
CUSTOM LOOK WITHOUT THE COST
This anchor plate provides a sleek, finished look, since it is precision milled using the same wide and smooth profile of Mac's Series 3 VersaTie track. When the fitting is removed, the anchor plate is smooth and unobtrusive. This is particularly beneficial for multi-use trailers. When not using for hauling a vehicle, you can even add multiple VT-1000 Single Stud Tie-Down Rings for additional hard points to secure various cargo.
BUILT TO WITHSTAND THE ELEMENTS
For long-lasting performance, the anchor plate is manufactured from rugged aircraft-grade aluminum. The mild steel backing plate is zinc-dipped to inhibit corrosion, then press-fit with stainless steel swage nuts. Stainless steel screws are provided to attach the assembly to your structure to ensure years of trouble-free service.
EAST INSTALLATION
The Double Stud Anchor Plate is pre-drilled with three countersunk holes. After drilling matching holes in the main structure, simply insert the screws through the anchor plate and structure and tighten into the threads of the backing plate.
MADE IN THE USA
All VersaTie tracks are fabricated right in Idaho. This allows Mad's to have better quality control, quicker turn-around time on custom orders and it also supports American jobs!
Mac's Double Stud Anchor Plate Assembly lets you add a tie-down point virtually anywhere, but are designed specifically for their higher load capacity double stud fittings, such as the included VT-2000 Double Stud Tie-Down Ring. This combination offers nearly twice the holding power (5,000lb Minimum Breaking Strength) as their Single Stud Anchor Plate Assembly. This is a great solution when securing heavy loads where a full length track system is not desired.
CUSTOM LOOK WITHOUT THE COST
This anchor plate provides a sleek, finished look, since it is precision milled using the same wide and smooth profile of Mac's Series 3 VersaTie track. When the fitting is removed, the anchor plate is smooth and unobtrusive. This is particularly beneficial for multi-use trailers. When not using for hauling a vehicle, you can even add multiple VT-1000 Single Stud Tie-Down Rings for additional hard points to secure various cargo.
BUILT TO WITHSTAND THE ELEMENTS
For long-lasting performance, the anchor plate is manufactured from rugged aircraft-grade aluminum. The mild steel backing plate is zinc-dipped to inhibit corrosion, then press-fit with stainless steel swage nuts. Stainless steel screws are provided to attach the assembly to your structure to ensure years of trouble-free service.
EAST INSTALLATION
The Double Stud Anchor Plate is pre-drilled with three countersunk holes. After drilling matching holes in the main structure, simply insert the screws through the anchor plate and structure and tighten into the threads of the backing plate.
MADE IN THE USA
All VersaTie tracks are fabricated right in Idaho. This allows Mad's to have better quality control, quicker turn-around time on custom orders and it also supports American jobs!
Specifications
- SkuMAC-5202
- ManufacturerMac's Custom Tie Downs
- MPN520210 | 520215 | 520225
FEATURES & BENEFITS:
- Add a heavy-duty tie down point right where you need it perfect for securing a vehicle
- Tested to 5000lb Minimum Breaking Strength in vertical pull
- Designed to take advantage of the additional strength of double stud tie-down fittings, such as the included VT-2000 Double Stud Tie-Down Ring
- Provides smooth, unobtrusive surface when fittings are removed
- The perfect complement to our VersaTie Track System
- Made in the USA!
KIT CONTENTS:
- (1) Aluminum Double Stud Anchor Plate
- (1) Zinc-dipped Mild Steel Threaded Backing Plate
- (1) VT-2000 Double Stud Tie-Down Ring
- (3) 1/4" Stainless Steel Machine Screws (choose your length)
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
Mac's Double Stud Anchor Plate Assembly
Quantity: 0
Cart Total$0000.00