Take your Ram to new heights with this complete suspension system from Zone! This Zone Offroad 8" suspension system for the 2008 Dodge Ram 2500/3500 is performance packed and budget friendly for those looking to get 38" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control.
In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available for trucks featuring a stock 2-piece rear driveshaft.
Shock Options - We offer this kit with several shock options:
- No Shocks: If you'd rather supply your own shocks, no problem, we give you this option.
- Fox Adventure Series Shocks: Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged gas chamber, preventing oil aeration for fade-free performance in rough terrain.
Specifications
- ManufacturerZone Offroad Suspension
- MPND30N | D31N
- Unique upper and lower control arm relocation bracket design.
- Heavy 1/4" steel construction.
- No cutting of the frame required.
- High performance at a low price.
- 2-piece rear driveshaft requires carrier bearing drop kit D5505
- Will not fit dually applications
- Please confirm rear axle size before ordering. Most Cummins equipped Rams feature a 4" rear axle diameter, but please confirm.
- Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary
- Depending on the factory transmission mount, in rare cases some 8" kits may not require the transfer case indexing kit. See installation instructions for details.
- Lift springs are designed for diesel models only
- Front Lift Height: 8"
- Front Lift Method: Coil Springs
- Rear Lift Height: 5"
- Rear Lift Method: Block Kit
- Install Time Hrs: 6-8
- Difficulty Level 1-5: 3
- Wheel Size: 17 X 9
- Back Spacing: 4.5-5"
- Max Tire Size: 38 X 13.50
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
Zone Offroad 8" Suspension System 2008 Ram 2500 / 3500
Quantity: 0
Cart Total$0000.00