Needing to replace the factory fuel pump in your 2011-2016 6.7L Powerstroke? Or, are you looking to upgrade and rest in the comfort of up to a supported 800hp? The PowerFlo lift pump is the latest drop-in lift pump from the diesel experts at Fleece Performance! This kit includes both the PowerFlo lift pump to replace the in-tank factory sending unit and a new frame mounted filter base with Donaldson fuel filter to replace the factory pump and filter assembly. Fleece's plug-and-play kit requires NO cutting, splicing, or modification of the factory fuel lines or fuel tank and the new filter base mounts in the original equipment filter housing location. Fleece has an amazing reputation for filtering the fuel that keeps your vehicle running tip-top so add the PowerFlo system to your truck today!
Want the benefits of the in-tank pump but need to run your own fuel lines? The pump outlet and return are threaded to accept a -8 O-ring fitting (3/4""-16 thread). This product has also been tested and verified with 2011-2016 trucks equipped with an S&S Diesel Motorsort DCR conversion kit and the S&S Diesel Motorsport CP4 Disaster Prevention Kit.
Specifications
- ManufacturerFleece Performance Engineering
- MPNPFE-PF-FMC-1116-SB | PFE-PF-FMC-1116-LB | FPE-FH-FMC
WARNING: CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov
KIT CONTENTS:
- PowerFlo Lift Pump with integral fuel level sender
- Filter base with Donaldson (P/N P553203) and provision for optional fuel heater (4 micron rating at 99% efficiency)
- Water-in-fuel sensor
- Chassis wiring harness and WIF sensor extension harness
- Fuel sending unit tank O-ring
- Mounting hardware
FEATURES & BENEFITS:
- Direct In-Tank Replacement:The PowerFlo lift pump retains the factory fuel lines, water-in-fuel sensor, and installs in less than half the time of other high flow lift pumps.
- Ultra-Quiet Dual Gerotor: Two is always better than one, and the PowerFlo delivers with two industry proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 HP!
- Seamless Integration: The active fill bucket eliminates the need for tank sumps,raw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need. This kit requires no cutting, splicing, or modification of the existing fuel lines, harness, or fuel tank and retains all factory diagnostic functionality.
APPLICATION NOTES:
- Operating pressure of: 65-70 psi at idle
- This product has been tested and verified to also work with 2011-2016 trucks equipped with an S&S Diesel Motorsport DCR conversion kit and the S&S Diesel Motorsport CP4 Disaster Prevention Kit.
- This product has been confirmed to fit Titan and S&B aftermarket fuel tanks.
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
Fleece Perfomance PowerFlo Lift Pump and Fuel System Upgrade Kit 11-16 Ford 6.7L Powerstroke
Quantity: 0
Cart Total$0000.00