Bring your GM to new heights with this complete suspension system from Zone! The heart of this Zone Offroad 5" lift kit is a pair of one-piece 1/4" steel cross members combined with the CNC machined steering knuckles to create OE geometry for a quality ride. Also included are a laser-cut differential skid plate, differential support brackets, torsion bar brackets, sway bar links, offset rear 3" lift blocks, stainless steel brake lines, and custom valved shocks. This system is designed to level the truck and has zero change to the vehicle's track width allowing for clearance of up to 35x12.50 tires. No differential trimming is required!
Shock Option:
If you are planning on needing some superior performance though, go with the FOX 2.0 Adventure Series shocks which are designed to work perfectly with this kit. Add on the front, rear, or both sets to make sure you are ready for whatever road you're on. Maximize your ride quality with the IFP system which separates shock oil and nitrogen-filled gas chambers for fade-free performance.
Carrier Bearing Drop Kit Option:
A 2-piece rear drive shaft will require some extra work as the geometry of your drive system will now have some added stress. We recommend adding this carrier-bearing drop to avoid any potential driveline vibration with the added lift height.
Steering Stabilizer Option:
As you increase tire size, added stresses and unwanted steering forces can make driving feel a little less comfortable than what you are used to. Protect your steering components and improve your ride quality with a Zone Steering Stabilizer which handles that stress so you don't have to.
Control Arm Option:
Add on some new control arms which are direct replacements of the stock. These heavy-duty control arms offer improved suspension travel and ride quality over the factory control arm design.
Specifications
- ManufacturerZone Offroad Suspension
- MPNC12N | C13N
- One piece 1/4" steel crossmembers
- CNC machined ductile iron steering knuckles
- Differential skid plate for offroad protection
- 3" Rear block kit for easy installation
- No Differential Trimming Required
- The front differential parts will not be used on 2wd models.
- Front Lift Height: 5"
- Front Lift Method: Knuckle Bracket Kit
- Rear Lift Height: 3"
- Rear Lift Method: Block U-Bolt Kit
- Install Time Hrs: 6-8
- Difficulty Level 1-5: 4
- Wheel Size: 17x9 or 18x9
- Back Spacing: 4.5"-4.625"
- Max Tire Size: 35 x 12.50
- Wheel Size: 20x9
- Back Spacing: 5"-6"
- Max Tire Size: 35 x 12.50
- Excellent replacement for light duty factory control arms
- Improved suspension travel and ride quality over the factory control arm design
- Fully welded, boxed steel design using 1/8" steel plate construction
- CNC machined ball joint and bushing mounts
- Improved droop travel and upper control arm operating angle
- High quality Raybestos Ball Joints and OE style bushings included and pre-installed
- Utilizes replaceable ball joints and bushings
- Features greasable ball joints
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
Zone Offroad 5" Suspension System Lift Kit 11-19 GM 2500HD / 3500
Quantity: 0
Cart Total$0000.00