Quick Ship SKU #: SYN-8581 Synergy Manufacturing Front Long Arm Bracket Kit 03-13 Ram 2500 / 03-12 Ram 3500 4wd

The design of the factory control arms and their mounting location at the frame are adequate for trucks that will see pavement their entire life. But, if you're like many, and are going to at least install a small leveling or lift kit and take the truck off the beaten path now and again, they are inadequate.
The Synergy Long Arm Bracket Kit features all of the same build quality and components as their complete Long Arm Upgrade Kit, but without the arms. If you are looking for the complete kit, please see below.
The Synergy Long Arm Upgrade is the solution that most have been looking for. In the past, if you wanted long arms, you were required to be running a 6" or greater lift kit, because at those heights, it is basically mandatory to keep the axle moving at all. But this left those running a leveling kit, or similar, in the dust. The Synergy system will work on trucks at stock height up to 6" of front end lift to deliver unmatched front suspension cycling.


Synergy Long Arm Upgrade as used on Project Mjolnir

We had the opportunity to get our hands on a set of pre-production Synergy Long Arms for use on our Project Mjolnir. This truck is sporting a set of our 3" Progressive Rate Coils from Eibach, Fox 3.0 12" smooth body shocks featuring DSC reservoirs, 40" tires, and a host of other suspension upgrades.

While the truck "only" has 3" of front end lift, it has articulation for days, and that would simply not be possible with standard control arms. And yes, we said 40" tires with basically a leveling kit.