Quick Ship SKU #: ME-S-06-Main Smarty S06 Tuner by MADS Electronics 03-07 Dodge Ram 5.9L Cummins

If you're looking for a programmer that delivers results, not hype, for your Cummins, you've found it. We, at Diesel Power Products, have been running Smarty products in most of our personally owned Cummins powered Rams for years and we do it for one reason....THEY WORK. So if you're ready for increased power and a noticeable increase in fuel economy, step up to a Smarty S-06!

One of the biggest reasons we choose Smarty, isn't because of the overall power gains, but really WHERE the power comes in at. While many other programmers deliver the same overall power, it comes down to what Smarty calls their CaTCHER software. This software brings the power right off of idle so you can experience the power increase throughout the entire RPM range, not just at wide open throttle.

Besides the sheer performance benefits, an added perk is the ease and speed of programming your truck. You merely plug the cord into the OBDII diagnostic port under your dash, follow the on-screen prompts, and in a matter of minutes, you're ready to roll....yes, its that easy.

The even numbered programs have the stock timing so you can use the Smarty to stack with other power adders that already add timing, such as the EDGE Juice. But if you are using the Smarty by itself, we have found that running the odd numbered power levels that feature advanced timing will deliver the best results. Further, within each main power level, there are four levels of adjustability for Timing, Rail Pressure and Torque Management to allow you to further fine tune your programming. And to put the icing on the cake, you can also adjust tire size for speedometer calibration and read and erase trouble codes.

These HP gains referred to are on a "close to stock" engine but depending on your modifications can be much more. With correctly modified and tuned engines we have seen gains in the 400+ Hp range above the stock software. On the higher settings a stock engine can NOT take full advantage of it because the fuel and air supply from the stock parts are simply not enough.

TNT-R PROGRAM INFORMATION:
The optional TNT-R programming is intended for those that are looking for the ultimate horsepower increase for use in modified trucks. The horsepower levels start around 130 horsepower on power level #1 and reach 260 additional horsepower on level #9. Should you run the TNT-R programming on power level nine with a stock transmission? Only if you're looking for a reason to upgrade your tranny! Should you run TNT-R loaded down with 20,000 pounds on a stock turbo? Only if you want to hear what it sounds like to turn your compressor wheel into shrapnel! Overall, the TNT-R programming is awesome, we've ran it in numerous trucks here. But it is what it is, intended for trucks that have been built to handle the additional power.
Minimum required modifications to run the TNT-R software would be an upgraded turbo, larger injectors, lift pump upgrade, injection pump upgrade, automatic transmission or manual with aftermarket clutch.

Smarty software updates are always free. As an added bonus, you can always send yours in and we can do it for you. Local guys can always bring theirs in for the free update. We will even help you program your truck!