Quick Ship SKU #: PMF-FRD-6001-Main PMF Suspension SD Adjustable 3-Link Arms 05-22 Ford F-250/F-350

There are a lot of moving parts to a vehicle lift, quite literally actually. The radius arms on 2005-2022 Ford Super Duty trucks are weak, and when you add additional leverage with lifts and wider wheels, you run the risk of component failure. That's in addition to diminished drivability and control. There's a solution available from PMF Suspension, which will give you room to grow, and help ensure a quality ride. In the same vane, Ford Super Duty trucks are notorious for not having adequate caster and when there's a change in your truck's height, you'll notice a floaty vague steering feel, unless you add caster shims to roll the front axle away from the firewall side of things. If you're making upgrades to your suspension, for racing, a lift, or even lowering, PMF offers an American made solution that will give you versatility and the adjustments needed to properly align your truck so you can regain control of  your ride.

PMF's Adjustable 3-Link Arms are a direct bolt on upgrade for anyone with a stock or lifted truck. These replace the weak stock radius arms with ultra duty adjustable 3-link arms. Both the upper and lower arms are adjustable to allow proper placement of the front axle in addition to adjustment of your castor. By allowing fine tuning of your castor paired with the increased strength of these arms, you can significantly improve the handling and steering characteristics of your truck. As always, these are built by hand with pride here in the USA!

Many lifted trucks that use radius arm drop brackets that can be an eye sore and with some designs weaker than factory, you can replace both the drop bracket and the radius arm for a nice clean installation. When a drop bracket is installed, the added drop adds leverage to the factory radius arm bracket. This can cause a loose/unstable feeling. In some catastrophic cases, this can even cause the radius arm/drop bracket to sheer the radius arm mount off the frame. Don't cut corners and sacrifice ride quality and safety! All joints used on these arms are re-buildable and greaseable. This will make for a smooth quiet operation and reduced service costs down the road.

All grade 8 hardware is supplied with the kit. These are capable of adjustment to factory alignment specs up to a 7" lift.