ReadyLiFT has designed an application-specific 6" lift kit and included an innovative Driveline Indexing System (DIS) with a transfer case clocking ring, OEM output shaft seal, and adjustable transmission crossmember for the 19+ Ram 3500's. Why go to all that trouble to achieve 6” of Ram 3500 lift? Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. This 6” lift kit addresses that inherent (albeit infrequent) driveline system phenomenon with the addition of ReadyLift Driveline Indexing System – a heavy-duty transfer case clocking [indexing] ring and new transmission crossmember-positioning the transmission and pinion position for a smooth driving experience on or off-road.
This kit includes the new DIS re-positioning components, heavy-duty and great riding 6” lift front springs, 5” lift rear taper blocks, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front, and rear track bar brackets, dropped cast iron pitman arm, front/rear sway bar relocation brackets, and bump stop extensions preventing over-compression of the Bilstein 5100 or Falcon 1.1 series front/rear shocks.
Specifications
- ManufacturerReadyLIFT Suspension
- MPN49-19620 | 49-19631
- 6” front lift with a 5” rear lift for the perfect lifted stance.
- Includes all-new Driveline Indexing System with transfer case clocking ring and new heavy-duty transmission crossmember.
- Maintains factory turning radius without rubbing when using the recommended wheel and tire size.
- Maintains factory suspension geometry and articulation.
- Includes 4 Bilstein 5100 or Falcon 1.1 series shocks tuned specifically for the Ram 3500 HD.
- For use on the Ram 3500 4WD HD Diesel High Output* engine trucks only (excludes gasoline-engine applications).
- Allows for up to 37x13.50 tires on 9" wide wheels with -18 offset.
- Radius Arm Drop Bracket
- Nut Plate, Radius Arm Drop Bracket
- Driver, Sway Bar Drop Bracket
- Passenger, Sway Bar Drop Bracket
- Brake Line Bracket, Front
- 5" Replacement Front Bump Stop
- Coil Spring, Front
- 4-Inch Fabricated Taper Lift Block
- Front Track Bar Bracket
- Transmission Connector Bracket
- Transmission Crossmember
- Transmission Harness Bracket
- Transmission Mounting Plate
- Transmission Mount Spacer
- 8 Bolt Clocking Ring
- Zinc E-Brake Extension
- Zinc Rear Brakeline Bracket
- Rear Bump Stop Extension
- Transfer Case Spacer
- Pitman Arm, Drop, Replacement
- E-Brake Extension
- Rear Brakeline Bracket
- Bilstein or Falcon Shock, Front
- Bilstein or Falcon Shock, Rear
- Hardware Pack
- Extended U-bolts with hardware
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
ReadyLIFT 6" Big Lift Kit 19-23 Ram 3500 6.7 Cummins 4WD
Quantity: 0
Cart Total$0000.00