The LML Duramax from factory has a decent fuel filtration system but there is one major problem, no fuel heater. If you operate your truck in colder climates, you could run into fuel gelling issues. The Fleece Performance Auxiliary Heated Fuel Filter kit comes with everything you need to properly route, plumb, and filter your fuel on your 6.6L GM Duramax LML. This kit replaces the factory fuel filter housing with a new filter base, integral high-flow fuel heating element, Water-In-Fuel (WIF) sensor, and a Donaldson spin on canister style filter. This filter base eliminates the factory fuel primer bulb and is designed to be used in conjunction with a positive pressure lift pump such as the Fleece PowerFlo lift pump or other aftermarket frame mounted pump.
Specifications
- SkuFPE-DMAX-HFFBA-1116
- ManufacturerFleece Performance Engineering
- MPNFPE-DMAX-HFFBA-1116
- Fuel filter base with integral fuel heater and fittings
- Donaldson 3 micron fuel filter and water separator
- Pre-formed hose and hose clamps
- Wiring harness and fuse taps
- Water-In-Fuel (WIF) sensor and adaptation harness
- For 2011-2016 6.6L Duramax only
- This filter base eliminates the factory fuel primer bulb and is intended ONLY for use with a positive pressure lift pump such as our PowerFlo lift pump or alternative frame mounted pump.
- Temperature switching points: ON: 28.4F +/-5.4F, OFF: 48.2F +/- 5.4F
- At typical fuel flow rates a temperature increase of between 4-8F will occur across the heating element
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
Fleece Performance Auxiliary Heated Fuel Filter Kit 11-16 GM 6.6L Duramax LML
Quantity: 0
Cart Total$0000.00