Upgrade the suspension in your 1999-2004 Ford F250/350 with this 4" Suspension Lift Kit from BDS. This kit will not only lift your truck for larger tire clearance, but will enhance the overall ride characteristics of your vehicle. This kit comes with two front Glide-Ride Leaf Springs with bolt style leaf alignment clamps, anti-friction pads, and tapered leafs for smooth ride through wheel travel. The box kit includes a track bar relocation bracket, extended length sway bar links, pitman arm for steering correction, bump stop extensions, and u-bolts. The rear is lifted via a 5" block and u-bolt kit.
Shock Options
Choose between custom valved BDS NX2 series or Fox 2.0 series gas charged monotube shocks to outfit the front and rear of your Ford F250/350.
- BDS NX2 Series - BDS NX2 series gas shocks offer impressive performance on and offroad. They use a nitrogen charged, twin tube design with 10-stage velocity sensitive valving for lightning fast dampening and superior control. This results in increased stability for improved handling, longer front end and tire life, less nose dive on severe braking, less squat on hard acceleration, smoother ride control without harshness.
- Fox 2.0 Series - Fox 2.0 performance series shocks have been tuned and tested by both Fox and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shox race products, but re-designed to maximize the ride quality, handling, and control of your BDS equipped truck or jeep, whether on or off the road.
Specifications
- SkuBDS-314H
- ManufacturerBDS Suspension
- MPN314H
- 35 x 12.50 w/16 x 8 and 4" back spacing(Triming May Be Required)
Estimated Installation Time: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3
IMPORTANT NOTES:
- These trucks were manufactured with two different style front u-bolts. You will need to know if your front leaf spring u-bolts are square or are half way between round and square with a gentle radius around the OE cast u-bolt plate before ordering.
- Vehicles produced before 3/1/99 require a different box kit. You must check the production date on the door prior to ordering.
- The Superduty came from the factory with a 2", 3", or 4" rear block. If you wish to truly level your vehicle it may be necessary to change the rear OE block.
- Will not fit dually applications.
- These trucks were produced both with and without a top mounted over load spring. There is an extra leaf that mounts on top of the rear leaf pack. You will need to know how your truck is equipped before ordering.
- If your vehicle is equipped with a carrier bearing, you will want the 123402 drop kit.
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
BDS Suspension 4" Lift Kit 99-04 Ford 7.3L / 6.0L Ford Powerstroke F250/350
Quantity: 0
Cart Total$0000.00