Quick Ship SKU #: BD-1032113 BD 2" Drop Track Bar Bracket 08-22 Ford SuperDuty

In most cases when you level out the front of your Powerstroke, its a simple spacer that goes between the coil and either the shock tower or the lower axle bucket, effectively lifting the front of the truck about two inches. Not necessarily a crisis but there are other parts of your front end that are negatively impacted by doing this if not dealt with. One such instance of this is your track bar, which ties to the drivers side frame on one end and the passenger side axle on the other, responsible for keeping your front axle square under the truck. Due to triangulation, as you lift the front of your truck, it swings the axle to the drivers side, and the more you lift, the more it swings. While most 4" and larger lift kits address this issue with a track bar drop bracket, its uncommon to include such a component in a leveling kit.

BD solves this issue with their Track Bar Drop Bracket, specifically intended for 2"-2.5" leveling kits. With the installation of this drop bracket, you'll relocate the pivot point 2-inch down lower down, offsetting the effect of the lift kit by bringing the trackbar assembly down into the factory position and fixing common steering and tracking issues. The BD track bar bracket is designed with high strength, ADI heat-treated cast iron for maximum strength and provides a strong reliable upgrade.