Is your 68RFE on its last leg? The BD Stage 2 Build It Transmission and Torque Converter Kit will rebuild your transmission to handle the added power your engine now produces. The parts included in this kit are the same components that are used in BD's Performance Transmission Packages. All kits include the basic rebuild parts, gaskets, and upgraded parts such as a custom bonded gasket and valve body separator plate, heavy duty accumulator plate, QT100 pressure plates, billet OD/reverse selector plate, stiffer billet intermediate reaction plate, billet 4c spring retaining ring, and ugraded clutches.
The BD ProForce Torque Converter is designed for towing and street applications up to 550 flywheel horsepower. This converter features BD's "Enhanced Stall" performance cast aluminum stator that improves efficiency and durability for low RPM response in stock or high horsepower applications. The front cover uses a billet forged front cover machined with thicker walls, stronger mounting pads and a 11.625 inch dual clutch. The turbine fins are furnace-brazed for improved fluid coupling efficiency and new piston damper springs are installed for longevity and durability.
Specifications
- SkuBD-1063022
- ManufacturerBD-Power
- MPN1063022
BUILD-IT KIT CONTENTS:
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Heavy duty accumulator plate to prevent accumulator blowout
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Over Drive clutches 17% increase and Under Drive clutches 20% increase
- Qty 2: Check Balls 1/4in
- Qty 3: 2C Clutch Friction, 2C Clutch Steel, 4C Clutch Friction, 4C Clutch Steel
- Qty 7: Reverse Clutch Friction, Reverse Clutch Steel
- Qty 15: OD Clutch Friction, OD Clutch Steel
- Filter - Pan, Spin On
- Billet OD/Reverse Selector Plate, OD/UD Reaction Plate
- Stiffer Billet Intermediate Reaction Plate, OverDrive/Rev Reaction Plate
- Billet 4C Spring Retaining Ring
- Gasket Kit - Oil Cooler, Oil Pan, Solenoid Pack
- Seal - Solenoid Pack Connector, 4wd Output Shaft, 2wd Output Shaft, Input Shaft
- Seal Kit - 2-4C, Input Drum, Solenoid Pack, Internal, External
- O-Ring - pump Cover
TORQUE CONVERTER:
- Good for 550 flywheel HP
- Ideal replacement for stock torque converter
- High performance Enhanced stall stator
- Great for street and towing applications
- Lower rpm response than the stock converter
- Furnace brazed turbine fins for improved fluid coupling efficiency
- Damper springs replaced
- 11.625 inch dual-clutch
- Billet forged front cover with thicker walls and stronger mounting pads
WARRANTY:
- PARTS
- Converter: 36-Months / Build It: 12-Month
- Converter: 150,000-Miles / Build It: 12,000-Miles
- LABOR
- Converter: 12-Months / Build It: NA
- Converter: 12,000-Miles / Build It: NA
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
BD 68RFE Stage 2 Build-It Transmission & Converter Kit 07.5-18 Ram 6.7L Cummins
Quantity: 0
Cart Total$0000.00