Quick Ship SKU #: BD-1027345 BD 1027345 In-Line/Remote 5" Mount Exhaust Brake 07.5-17 Ram 6.7L Cummins

For those that Ram 6.7L Cummins and have upgraded their stock VGT (Variable Geometry Turbo) to a better performing, more reliable non-VGT, there's one thing that most are seriously missing, that's the factory exhaust brake. And while we agree that the stock VGT brake is a good brake, especially for those that have never had a standard, in-line exhaust brake, it leaves something to be desired in comparison. If you've given up your stock turbo, and are ready to add a legitimate exhaust brake back in that will deliver serious retarding power, check out this brake from BD that is even designed to integrate into your factory switch on the dash!

There's a reason why the BD Brake is the most widely-recognized diesel exhaust brake in the industry: It's the best! Compare it to the competition, and you'll see why.

The factory VGT turbo and exhaust brake work fairly well as a factory combination. However, over the years since the release of the 6.7L Cummins, they have also shown their weaknesses. The biggest issue that most people have is that the sliding nozzle / ring and the turbo will develop soot and actually freeze up, causing serious drivability issues, as well as losing the exhaust brake. On top of this, the factory turbo is fairly limited in its capabilities, especially as we add more power to the engine. And finally, the performance of the factory exhaust brake is marginal. For those that have never had an exhaust brake, they think it's the best thing since sliced bread, but for those that have had a traditional in-line style of brake, there simply is no comparison.

So what's the solution? Many Cummins owners will eliminate the VGT turbo and switch to a standard single-stage turbo, similar to what the 5.9L's came with for years, and there is a multitude of performance turbos that suit this same criteria. However, when you do this, you lose the exhaust brake. The fix? BD builds an in-line exhaust brake specific for those 6.7L owners that have removed the VGT turbo in favor of a single stage, such as the BD Super B Special. This kit comes complete with everything you need to install into the 4" downpipe found on most aftermarket turbo retrofit kits for the 6.7L's.

Increase your driving confidence and towing safety with the superior retarding performance of the BD Brake for your Cummins! Using BD's exclusive Variable Orifice Technology, BD's inline exhaust brake mounts in the stream of the exhaust system, perfect for those with aftermarket turbos, providing peak retarding power throughout the engine's rpm rangenot just at high rpm like other brands.

Designed for years of reliable operation, the BD Brake's rugged cast-iron housing incorporates BD's exclusive AlumiBronze bushing and piston ring-sealed, stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment. Actuated by an air cylinder, the offset butterfly valve won't stick, and has been strategically placed in the elbow so that it won't impede exhaust flow when in the open position. The BD brake incorporates a threaded port for mounting an Exhaust Gas Temperature probe, as well as a 1/4-inch stainless steel port that can be used to monitor the brake's retarding performance. Got a modified or twin-turbo application? BD's remote-mount four-inch kits are an effective solution.

Controlling the exhaust brake couldn't be easier, as it uses the factory switch on the dash for a clean, seamless installation. The BD brake communicates with the engine's electronic idle verification board for quick engagement. The durable air compressor can even be used for other applications it's that tough.

All BD Brake kits come complete with the brake, air compressor, mounting hardware and complete instructions.

NOTE This exhaust brake will NOT work with the factory (or similar) VGT turbo, MUST be used with a traditional style turbo, such as an S300 or the BD Super B Special.

No Shipping To CA