So, you've installed a Smarty TNT-R or EFILive, TS MP-8, and a set of 100 HPinjectors, but still not getting the power you think the truck's capable of. We see this scenario too often. The stock Cummins CP3 is a good pump, but it's by no means capable of anything more than a good programmer and a set of 60 horsepower injectors, anything above that, you've GOT to address the pump.
BD's High Performance R900 12mm CP3 injection pump is capable of up to a 72% increase in capacity / displacement and delivers enough fuel to support up to 750 horsepower, all while maintaining 24,000 PSI of rail pressure. This pump is a simple bolt-in installation and produces up to 5.25 LPM (liters per minute) versus the stock that puts out a mere 3.05 LPM.
BD's R900 pumps are engineered with an enhanced metering unit and newly designed upgraded cam shaft that has 9x greater fracture toughness over others via BD's heat treating process with modified plungers and stroke. Plus, it eliminates the off throttle fuel spikes common with stock pumps that can potentially damage injectors when trying to produce more than 500 HP. All of these modifications deliver long-term durability with consistent rail pressure supply on demand that provides an efficient atomization of fuel, resulting in more power, better combustion, and lower EGT's.
BD's High Performance R900 12mm CP3 injection pump is capable of up to a 72% increase in capacity / displacement and delivers enough fuel to support up to 750 horsepower, all while maintaining 24,000 PSI of rail pressure. This pump is a simple bolt-in installation and produces up to 5.25 LPM (liters per minute) versus the stock that puts out a mere 3.05 LPM.
BD's R900 pumps are engineered with an enhanced metering unit and newly designed upgraded cam shaft that has 9x greater fracture toughness over others via BD's heat treating process with modified plungers and stroke. Plus, it eliminates the off throttle fuel spikes common with stock pumps that can potentially damage injectors when trying to produce more than 500 HP. All of these modifications deliver long-term durability with consistent rail pressure supply on demand that provides an efficient atomization of fuel, resulting in more power, better combustion, and lower EGT's.
No Shipping To CA
Specifications
- SkuBD-1050551
- Dimensions12 10 8
- ManufacturerBD-Power
- MPN1050551
WARNING: CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov
FEATURES & BENEFITS:
- Heat treated upgraded shaft 9x greater fracture toughness
- 72% more fuel capacity / displacement than stock
- Produces up to 5.25 LPM versus the stock 3.05 LPM
- 12mm stroke cam and housing design changes
- Delivers enough fuel to support up to 900 engine HP
- Maintains 24,000 PSI of rail pressure
- All that fuel without going to a dual pump system
- Enhanced metering unit
- New designed cam shaft with modified plungers and stroke
- Eliminates potentially damaging off throttle fuel spikes common with stock pumps trying to meet flow demand
- Long-term durability with consistent on-demand high fuel pressure supply
- Provides efficient atomization resulting in more power, better combustion and lower EGTs
- All CP3 pumps are fully tested before leaving BD's facility
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
BD-Power 1050551 High Performance R900 12mm Stroker CP3 Injection Pump 03-18 Cummins
Quantity: 0
Cart Total$0000.00