When lifting your heavy duty Ram, especially heights over 4.5", it is imperative to address the angles of the factory radius arms in order to maintain and even improve upon the factory ride and overall performance of the suspension. This complete 6.5" system from Zone includes all of the necessary components to not only lift your Cummins, but deliver an improvement in your suspension's capabilities and performance.
Engineered to match the strength of the RAM 2500 4WD trucks, these systems upgrade the factory front radius arms and offer great ride quality and handling characteristics on road while improving offroad performance and allowing 37" tires to be installed. The new radius arms are a substantial upgrade to the factory stamped units and improve the ground clearance compared to drop bracket kits. The arms are fully boxed, internally gusseted and designed to bolt in the factory location while correcting the suspension geometry at 6.5" of lift. At the frame mount, the arms utilize extra large, greaseable bushings to isolate road noise and vibrations while the axle mount is designed to retain the factory alignment cams for adjustability. The arms are formed inward to maximize tire clearance and looks great under the RAM HDs.
In addition to the new radius arms, this system gets its height from 6.5'' progressive rate front coils designed for a smooth ride for unmatched highway and trail performance. Steering correction comes from a forged dropped pitman arm and a heavy duty, fully welded front track bar bracket is used at the frame to recenter the front axle securely under the truck. Rounding out the front of this 6.5" radius arm system are a pair of polyurethane extended bump stops, brake line relocation brackets, and Zone Nitro shocks along with all the necessary hardware to complete the install. Out back the the new coil sprung rear is lifted using 4.5" progressive rate coils designed to level the stance while offering a great ride quality on and offroad without hindering the towing capabilities. Also included are extended sway bar links, bump stop extensions and a rear track bar bracket to recenter the rear axle.
Specifications
- SkuZON-D58N
- ManufacturerZone Offroad Suspension
- MPND58N
- Utilizes Heavy Duty Drop Brackets
- Correct Suspension Geometry
- Progressive Rate Coil Springs
- Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
- Vehicles equipped with a two piece drive shaft and a carrier bearing require bearing drop kit D5405.
- Not designed for factory rear airbag suspension models.
- Will not fit Power Wagon models
- Front Lift Height: 6.5"
- Front Lift Method: Coil Springs with Replacement Radius Arms
- Rear Lift Height: 4.5"
- Rear Lift Method: Coil Springs
- Wheel Size: 17 X 9+
- Back Spacing: 4.5"
- Max Tire Size: 35 X 12.50
- Wheel Size 17x9+
- Back Spacing 5.625"
- Max Tire Size 37 x 13.50
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
Zone Offroad 6.5" Radius Arm Suspension System 14-18 6.7L Cummins Ram 2500
Quantity: 0
Cart Total$0000.00