Quick Ship SKU #: SYN-8525-02 Synergy Manufacturing 8525-02 Heavy Duty Steering Kit 00-02 Dodge Ram

If you're the owner of any Heavy Duty Dodge Ram, you're fully aware of the issues that has plagued Ram for years that stem from poor steering components. If you've never heard of the a quick search online will reveal everything. Prematurely worn ball joints, tie rods, excessive steering wander, all of these have become the norm if you own a truck with a Rams head badge on the grill. SynergyManufacturing has set out to change all of that with their Heavy DutySteering Kit.

This Heavy Duty steering kit is a larger and stronger, bolt-on replacement for the stock steering. No drilling or reaming of the knuckles is required. It uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering used on all pre-2008 vehicles (with exception to some 1999 models).

Using the factory T-style steering design also results in no induced bump steer inherent with most aftermarket "cross over" steering kits. The Tie Rod also uses low misalignment "wobble stopper" Tie Rod End Boots to prevent unwanted Tie Rod "flop" which results in a dead spot in the steering when changing direction. The complete kit includes a heavy duty Drag Link, heavy duty Tie Rod, and Steering Stabilizer Mount Kit for use with aftermarket steering stabilizers using a 1/2" mounting bolt.

• Drag Link is bent to clear factory axle brackets and is compatible from stock to 6" lifted vehicles. (Vehicles over 6" of lift will require a drop pitman arm for compatibility)
• Drag Link is made from 1-1/2" x .250 wall DOM bar.
• Synergy Double Adjuster Sleeve allows adjustment of Drag Link length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Drag Link comes with Synergy HD metal on metal tie rod ends, 4133-L.
• Strongest Dodge Drag Link on the market!

• Tie Rod is bent to clear sway bar mounts and steering pitman arm.
• Provides 2" of additional ground clearance from stock tie rod.
• Made from 1-1/2" x .188 wall 4130 Chromoly and Heat Treated for maximum strength - (200%) stronger than stock tie rod.
• Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Tie Rod comes with Synergy HD metal on metal tie rod ends, 4134-L.
• Tie rod ends include low misalignment "wobble stopper" grease boots to prevent unwanted Tie Rod "flop".
• Strongest Dodge Tie Rod on the market!

• Fabricated clamp to retain factory or aftermarket stabilizer with 1/2" mounting bolt.
• FOX-982-24-941 Steering Stabilizer recommended.

• 8567-12 Drag Link
• 8568-02 Tie Rod
• 8568-10 Tie Rod Stabilizer Clamp Drop Bracket