Expert Pick SKU #: FPE-351-0712 Fleece Performance 63mm FMW HE351VE VGT Cheetah Turbocharger 07.5-12 Dodge 6.7L Cummins

Amplify your driving experience with a Fleece Performance VGT Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm billet compressor wheel and a high flow turbine wheel, this turbo is capable of supporting 700 RWHP without sacrificing any driveability. As a 100% drop-in replacement turbo, the Fleece VGT Cheetah does not require any expensive kit or specialized tuning, just bolt it in and go. Designed as a stock appearing, drop in replacement turbocharger capable of much more! With Fleece's exclusive FMW compressor wheel and inconel turbine wheel technology, you’ll enjoy smooth throttle response and big top-end power. All turbos feature a new actuator.

Build Better Boost With Your 6.7 Cummins With This Fleece Turbo

Diesel engines are essentially a big air pump that utilizes properly timed fuel injection pulses to combust with the incoming air charge. In order to make that combustion event “bigger,” it requires more air and typically more fuel, which in turn generates more power. The factory HE351VE turbo found on your truck features a 60mm compressor wheel, which is attached to a shaft with the turbine wheel on the opposing exhaust side of the turbo. As exhaust exits the engine, it spins this shaft, in turn causing the cold, compressor side of the turbo spin even faster, increasing the amount of airflow sucked into the engine, creating boost. While additional turbo boost can be created via larger injectors and/or performance programmers and chips because it makes for a bigger explosion (adding more fuel to the fire), it still necessitates more airflow in order to keep EGT’s (Exhaust Gas Temperatures) in check. The Fleece Cheetah features a larger 63mm FMW compressor wheel and Inconel turbine wheel to get more air in and out, and do it quicker than the stock turbo. In doing so, it will generate increased levels of boost for more power and cooler temperatures.

The Fleece Cheetah Turbo is a Perfect Upgrade For Your 6.7 Cummins

In years past, if you wanted to upgrade the turbo on your 6.7 Cummins, it required a special turbo install kit, a new exhaust manifold, different exhaust, and custom tuning. Fortunately, those days are done with the Fleece Cheetah. You can quite literally unbolt your stock turbo, bolt on the Cheetah, fire the truck up and move on with your day. You don’t even need to have the actuator calibrated, its that easy! Beyond the ease of installation, you get to maintain full functionality of your stock exhaust brake, and it supports up to a whopping 700 rear wheel horsepower, but still suitable for the stock truck!

FREQUENTLY ASKED QUESTIONS:

Q: Does the Fleece Cheetah include a turbo actuator?
A: Yes, the turbo includes a new, pre-calibrated actuator meaning there is no need to take your truck to have the turbo calibrated after installation.

Q: Do I need to replace the exhaust with the installation of this turbo?
A: No, this is a drop-in turbo requiring no additional modifications.

Q: I see you have options to include a new feed and drain line. Are these necessary?
A: You can reuse your existing oil lines, however we’ve found that they can either be damaged during removal and reinstallation and sometimes its just easier to start with new components instead of cleaning up the old hoses.

• Install Instructions

California Air Resource Board D-834-6