Keep yourself on the road and avoid boot blowouts on your GM 6.6L Duramax with Mishimoto’s cold-side intercooler pipe and boot kit. The factory cold-side pipe for the L5P is a measly 2.5" that chokes the engine and tight bends create even more restriction. The Mishimoto cold-side intercooler pipe is 3" in diameter throughout with smooth transitions to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the boots by preventing leaks and blowouts.
To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new o-ring and spring clip to ensure a secure and leak-free fit. Unlike other available cold-side pipes on the market, these pipes retain the intake air temp harness mounting location for safe and secure wire routing, just as Chevy/GMC intended.
The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P cold-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all Mishimoto Duramax products, this cold-side intercooler pipe and boot kit includes the Mishimoto Lifetime Warranty for a lifetime of performance.
No Shipping To CA
Specifications
- ManufacturerMishimoto
- MPNMMICP-DMAX-17CP | MMICP-DMAX-17CWBK
- Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
- 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
- Up to 16% less restrictive than stock piping
- Includes new quick-disconnect O-ring and spring clip
- Eliminates failure-prone stock throttle valve connector
- Retains temp sensor harness mount for safe and secure wire routing
- Internal bead roll ensures secure connection between coupler and throttle valve
- CNC-machined quick-disconnect ensures precise, leak-free fit
- Additional bung can be drilled and tapped for sensors
- Requires no additional tuning
- Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
- Available in polished or wrinkle-black powder coated finish
- (1) Aluminum Intercooler Pipe w/ Bung
- (1) Aluminum Intercooler Pipe w/ O-Ring and Spring Clip
- (2) Silicone Boots with DuraCore™ Technology
- (4) Constant-Tension T-Bolt Clamps
- Mishimoto Lifetime Warranty
- INSTALLATION TORQUE SPECS 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
- PIPE DIAMETER: 3"
- CONSTANT TENSION T-BOLT CLAMPS SPECS: (4) 3.5" Constant-Tension T-Bolt Clamps
- PIPE MATERIAL: Aluminum
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
Mishimoto Cold-Side Intercooler Pipe and Boot Kit 17-19 GM 6.6L Duramax L5P
Quantity: 0
Cart Total$0000.00