Easily install a fuel pressure gauge without having to install a into the fuel line with the Driven Diesel Fuel Pressure Adapter!
This Fuel Pressure Adapter from Driven Diesel solves two issues when installing and running a fuel pressure gauge in your 6.0L. First of all, without this type of adapter, you would traditionally have to splice into your fuel line and install a "T" in order to gain access to the fuel pressure. Secondly, by separating the sending unit away from the direct stream of fuel, it will help to alleviate needle bounce that is most prevalent with electric fuel pressure gauges / sending units that is caused by the pump pulsations and the way the sending unit gains its readings, which are also pulsations on electric sending units.
The provided adapter fitting installs in place of the plug in the fuel filter bowl and the hose allows the sending unit to be located off the engine (away from heat and vibration). The sending unit can also be located lower than the filter bowl (allowing any air bubbles to migrate back up to the filter so they don't affect the pressure reading). Typically, your best option is to route the hose and sending unit behind the air box and battery tray near the drivers side of the engine compartment.
MADE IN THE USA
This Fuel Pressure Adapter from Driven Diesel solves two issues when installing and running a fuel pressure gauge in your 6.0L. First of all, without this type of adapter, you would traditionally have to splice into your fuel line and install a "T" in order to gain access to the fuel pressure. Secondly, by separating the sending unit away from the direct stream of fuel, it will help to alleviate needle bounce that is most prevalent with electric fuel pressure gauges / sending units that is caused by the pump pulsations and the way the sending unit gains its readings, which are also pulsations on electric sending units.
The provided adapter fitting installs in place of the plug in the fuel filter bowl and the hose allows the sending unit to be located off the engine (away from heat and vibration). The sending unit can also be located lower than the filter bowl (allowing any air bubbles to migrate back up to the filter so they don't affect the pressure reading). Typically, your best option is to route the hose and sending unit behind the air box and battery tray near the drivers side of the engine compartment.
MADE IN THE USA
Specifications
- SkuDD-60FS-FPAKIT
- ManufacturerDriven Diesel
- MPNDD-60FS-FPAKIT
Kit Features:
- Filter Bowl Adapter Fitting
- 30" Pre-Assembled S.S. Braided Teflon Hose
- BLACK Protective Sleeve Over Hose
- 1/8" Female NPT Gauge / Sending Unit Port
- Schrader Valve to Bleed Air or Connect Mechanical Gauge
- 45‚° Hose End for Better Clearance
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Loyalty Rewards
- For each dollar that you spend with us, we reward you with points and we have created three tiers for how many points you'll receive per dollar spent based upon which tier you're in.
-
Diesel Insider ($0-599 spent in the last year):
1 point per $1.00 spent -
Diesel Elite ($600-1199 spent in the last year):
1.2 points per $1.00 spent -
Diesel Expert ($1,200+ spent in the last year):
1.5 points per $1.00 spent - You must create an account or be logged-in to receive loyalty funds
Added To Cart
Driven Diesel Fuel Pressure Adapter 03-07 6.0L Ford Powerstroke
Quantity: 0
Cart Total$0000.00