{"title":"Axles \u0026 Differentials | 1983 - 1987 Ford 6.9L IDI","description":"\u003ch3 data-start=\"299\" data-end=\"370\"\u003e\u003cstrong data-start=\"303\" data-end=\"370\"\u003eAxles \u0026amp; Differentials for 1983–1987 Ford 6.9L IDI Diesel Trucks\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"372\" data-end=\"836\"\u003eYou’ve heard the saying, \u003cem data-start=\"397\" data-end=\"440\"\u003e“They don’t make them like they used to!”\u003c\/em\u003e haven’t you? It’s true — trucks from the mid to late ’80s were built differently. These \u003cstrong data-start=\"529\" data-end=\"553\"\u003eclassic Ford diesels\u003c\/strong\u003e were engineered to last, but even the toughest components eventually need attention. The \u003cstrong data-start=\"643\" data-end=\"670\"\u003eDana and Sterling axles\u003c\/strong\u003e found under the \u003cstrong data-start=\"687\" data-end=\"714\"\u003e1983–1987 Ford 6.9L IDI\u003c\/strong\u003e were impressively strong for their time, but like any mechanical system, they developed issues over years of heavy use.\u003c\/p\u003e\n\u003cp data-start=\"838\" data-end=\"1235\"\u003eMany of the \u003cstrong data-start=\"850\" data-end=\"867\"\u003eDana 44 axles\u003c\/strong\u003e were excellent for light-duty work, yet under extreme loads, axle failures became a common occurrence. On \u003cstrong data-start=\"974\" data-end=\"1001\"\u003eDana 60-equipped models\u003c\/strong\u003e, wear on the \u003cstrong data-start=\"1015\" data-end=\"1040\"\u003ering and pinion gears\u003c\/strong\u003e was a known problem — a serious concern for work trucks that rely on consistent torque delivery. Meanwhile, later \u003cstrong data-start=\"1155\" data-end=\"1181\"\u003eSterling differentials\u003c\/strong\u003e were notorious for developing slow leaks over time.\u003c\/p\u003e\n\u003cp data-start=\"1237\" data-end=\"1566\"\u003eWhile these axles and differentials were durable for their era, decades of towing, off-roading, and high-stress use have taken their toll. The good news? \u003cstrong data-start=\"1391\" data-end=\"1416\"\u003eDiesel Power Products\u003c\/strong\u003e offers a \u003cstrong data-start=\"1426\" data-end=\"1479\"\u003ecomplete lineup of axle and differential upgrades\u003c\/strong\u003e to get your 6.9L IDI back on the road — stronger and more reliable than ever before.\u003c\/p\u003e\n\u003cp data-start=\"1568\" data-end=\"1915\"\u003eFor those looking to enhance both \u003cstrong data-start=\"1602\" data-end=\"1632\"\u003eperformance and appearance\u003c\/strong\u003e, you can’t go wrong with an upgraded \u003cstrong data-start=\"1670\" data-end=\"1692\"\u003edifferential cover\u003c\/strong\u003e. We carry premium options from \u003cstrong data-start=\"1724\" data-end=\"1737\"\u003eMag-Hytec\u003c\/strong\u003e and \u003cstrong data-start=\"1742\" data-end=\"1757\"\u003eBanks Power\u003c\/strong\u003e, featuring \u003cstrong data-start=\"1769\" data-end=\"1797\"\u003eincreased fluid capacity\u003c\/strong\u003e, \u003cstrong data-start=\"1799\" data-end=\"1826\"\u003eintegrated cooling fins\u003c\/strong\u003e, and \u003cstrong data-start=\"1832\" data-end=\"1862\"\u003emachined aluminum housings\u003c\/strong\u003e that both look great and help improve performance.\u003c\/p\u003e\n\u003cp data-start=\"1917\" data-end=\"2297\"\u003eIf you’re chasing strength and reliability for your \u003cstrong data-start=\"1969\" data-end=\"1995\"\u003eDana 60-equipped F-350\u003c\/strong\u003e, consider the \u003cstrong data-start=\"2010\" data-end=\"2056\"\u003eYukon Gear \u0026amp; Axle 35-Spline Front Axle Kit\u003c\/strong\u003e — which includes both inner and outer axles, \u003cstrong data-start=\"2102\" data-end=\"2124\"\u003eYukon Super Joints\u003c\/strong\u003e, and all necessary hardware. These components are built from \u003cstrong data-start=\"2186\" data-end=\"2222\"\u003ehigh-tensile 4340 Chromoly steel\u003c\/strong\u003e, ensuring maximum durability under heavy torque and off-road conditions.\u003c\/p\u003e\n\u003cp data-start=\"2299\" data-end=\"2675\"\u003eA common issue on these classic Fords involves the \u003cstrong data-start=\"2350\" data-end=\"2410\"\u003efactory locking hubs disengaging under high-torque loads\u003c\/strong\u003e. By upgrading to a set of \u003cstrong data-start=\"2437\" data-end=\"2462\"\u003eDynatrac DynaLoc hubs\u003c\/strong\u003e, you gain \u003cstrong data-start=\"2473\" data-end=\"2501\"\u003ethree times the strength\u003c\/strong\u003e, a \u003cstrong data-start=\"2505\" data-end=\"2527\"\u003elow-profile design\u003c\/strong\u003e that reduces impact with rocks or debris, and an \u003cstrong data-start=\"2577\" data-end=\"2606\"\u003eeasy bolt-on installation\u003c\/strong\u003e — all designed to improve your truck’s drivability and resilience.\u003c\/p\u003e\n\u003cp data-start=\"2677\" data-end=\"2910\"\u003eWhether you’re restoring your classic Ford, tackling a full rebuild, or building a capable workhorse, \u003cstrong data-start=\"2779\" data-end=\"2804\"\u003eDiesel Power Products\u003c\/strong\u003e has the \u003cstrong data-start=\"2813\" data-end=\"2860\"\u003eaxles, gears, lockers, bearings, and covers\u003c\/strong\u003e to make your 6.9L IDI perform better than ever.\u003c\/p\u003e\n\u003ch3 data-start=\"2917\" data-end=\"2974\"\u003e\u003cstrong data-start=\"2921\" data-end=\"2974\"\u003eWhy Upgrade Your 6.9 IDI’s Axles \u0026amp; Differentials?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"2975\" data-end=\"3433\"\u003e\n\u003cli data-start=\"2975\" data-end=\"3069\"\u003e\n\u003cp data-start=\"2977\" data-end=\"3069\"\u003e\u003cstrong data-start=\"2977\" data-end=\"3001\"\u003eRestore Reliability:\u003c\/strong\u003e Replace worn or leaking components to keep your drivetrain tight.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3070\" data-end=\"3163\"\u003e\n\u003cp data-start=\"3072\" data-end=\"3163\"\u003e\u003cstrong data-start=\"3072\" data-end=\"3091\"\u003eBoost Strength:\u003c\/strong\u003e Handle higher torque loads with heavy-duty Chromoly and billet parts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3164\" data-end=\"3255\"\u003e\n\u003cp data-start=\"3166\" data-end=\"3255\"\u003e\u003cstrong data-start=\"3166\" data-end=\"3187\"\u003eEnhance Traction:\u003c\/strong\u003e Choose lockers or limited-slip differentials for consistent grip.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3256\" data-end=\"3345\"\u003e\n\u003cp data-start=\"3258\" data-end=\"3345\"\u003e\u003cstrong data-start=\"3258\" data-end=\"3278\"\u003eImprove Cooling:\u003c\/strong\u003e Performance diff covers keep fluid temps stable during hard use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3346\" data-end=\"3433\"\u003e\n\u003cp data-start=\"3348\" data-end=\"3433\"\u003e\u003cstrong data-start=\"3348\" data-end=\"3367\"\u003eDirect Fitment:\u003c\/strong\u003e Designed specifically for 1983–1987 F-250 and F-350 IDI models.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"3440\" data-end=\"3486\"\u003e\u003cstrong data-start=\"3444\" data-end=\"3486\"\u003ePopular Axle \u0026amp; Differential Components\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"3487\" data-end=\"3741\"\u003e\n\u003cli data-start=\"3487\" data-end=\"3536\"\u003e\n\u003cp data-start=\"3489\" data-end=\"3536\"\u003e\u003cstrong data-start=\"3489\" data-end=\"3534\"\u003eRing \u0026amp; Pinion Gear Sets (Multiple Ratios)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3537\" data-end=\"3586\"\u003e\n\u003cp data-start=\"3539\" data-end=\"3586\"\u003e\u003cstrong data-start=\"3539\" data-end=\"3584\"\u003eDifferential Lockers \u0026amp; Limited-Slip Units\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3587\" data-end=\"3624\"\u003e\n\u003cp data-start=\"3589\" data-end=\"3624\"\u003e\u003cstrong data-start=\"3589\" data-end=\"3622\"\u003eAxle Shafts, Bearings \u0026amp; Seals\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3625\" data-end=\"3689\"\u003e\n\u003cp data-start=\"3627\" data-end=\"3689\"\u003e\u003cstrong data-start=\"3627\" data-end=\"3687\"\u003ePerformance Differential Covers (Mag-Hytec, Banks Power)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"3690\" data-end=\"3741\"\u003e\n\u003cp data-start=\"3692\" data-end=\"3741\"\u003e\u003cstrong data-start=\"3692\" data-end=\"3739\"\u003eDynatrac DynaLoc Hubs \u0026amp; Yukon Chromoly Kits\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"3748\" data-end=\"3984\"\u003e\u003cstrong data-start=\"3748\" data-end=\"3884\"\u003eRebuild or upgrade your 1983–1987 Ford 6.9L IDI drivetrain with premium axle and differential components from Diesel Power Products. \u003c\/strong\u003eClassic strength, modern performance, and proven reliability — built to outlast and outperform.\u003c\/p\u003e","products":[{"product_id":"afe-46-00001-diff-cover-sight-glass","title":"AFE Differential Cover Sight Glass","description":"\u003cp\u003eaFe Power differential covers come with the option to run a oil level sight glass to visually see how much oil your differential cover has at all times. Factory and most aftermarket differential covers do not allow for this option which leaves you guessing on your fluid level. Don't be caught with low oil on your differential, or your up for a costly repair! aFe Power has got you covered! This is a great upgrade for all aFe Power Raw or Street Series differential covers.\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":52076803883373,"sku":"AFE-46-00001","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/15125.jpg?v=1752689169"},{"product_id":"afe-46-00002-magnetic-fill-plug","title":"AFE Deep Reach Magnetic Fill Plug","description":"The aFe Power deep reach magnetic fill plug captures loose particles from your differential cover fluid for maximum rear-end protection. This is a great upgrade for any Raw or Street Series aFe Power Differential covers!","brand":"AFE","offers":[{"title":"Default Title","offer_id":52076804079981,"sku":"AFE-46-00002","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/15126.jpg?v=1752689169"},{"product_id":"afe-pro-guard-d2-slip-gear-oil-75w-140","title":"AFE Pro Guard D2 Fully Synthetic Limited Slip Gear Oil 75W-140 Single Qt.","description":"\u003cp\u003eaFe Power's Pro Guard D2 synthetic 75W-140 limited slip oil is competition proven and utilizes next generation synthetic oil technology to provide consistent limited slip differential performance no matter what type of vehicle you drive. Ideal for both clutch type and torsion type differentials.  It outperforms conventional gear lubricants and delivers outstanding performance in all heavy duty applications from towing\/hauling to extreme environments like off-roading, UTV'S and rock crawling.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGroup IV synthetic base:\u003c\/b\u003e This competition proven formulation utilizes a group IV synthetic base along with a proprietary additive package that reduces drag, resist foaming and maintains its viscosity under extreme heat and high loads.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUsage:\u003c\/b\u003e The PRO Guard D2 Synthetic 75W-140 limited slip gear oil exceeds the performance requirements of API GL-5 recommended for both open and limited slip applications.\u003c\/p\u003e\n\u003cp\u003eNote: Not for use in transmission. Do not mix with other fluids.\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":52076827771245,"sku":"AFE-90-20101","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/90-20101.jpg?v=1752689254"},{"product_id":"afe-pro-guard-d2-slip-gear-oil-75w-90","title":"AFE Pro GUARD HD Synthetic Gear Oil 75W-90","description":"\u003cp\u003eaFe POWER Pro Guard HD synthetic 75W-90 limited slip oil is tested and utilizes advanced synthetic oil technology to ensure consistent limited slip differential performance across various applications. Suitable for both clutch type and torsion type differentials, this oil surpasses traditional gear lubricants, delivering exceptional performance in heavy-duty scenarios, including towing\/hauling and extreme environments like off-roading, UTVs, and rock crawling.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AFE","offers":[{"title":"Default Title","offer_id":52076827738477,"sku":"AFE-90-20001","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/90-20001.jpg?v=1752689254"},{"product_id":"p-13785-arb-air-compressor-manifold-kit-171503-aspx","title":"ARB Air Compressor Manifold Kit 171503","description":"\u003cp\u003eThe ARB Air Compressor Manifold kit is designed to work specifically with the ARB On-Board Twin Air Compressor (CKMTA12). Once installed on your CKMTA12 the Air Manifold allows you to connect up to two air locker solenoids as well as the ARB Pump-Up Kit.\u003c\/p\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":52076843630957,"sku":"ARB-171503","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/13785.jpg?v=1752689315"},{"product_id":"p-13780-arb-high-performance-12-volt-portable-air-compressor-ckmp12-aspx","title":"ARB High Output 12 Volt Portable Air Compressor","description":"Whether you're the survivalist type or you just like being prepared, ARB's High Output 12 Volt Portable Air Compressor is right up your alley.  Designed and engineered to outlast anything like it on the market, the compressor comes in a portable, compact carrying case and everything you need for quick inflation of tires or sporting and camping goods. The compressor connects to your vehicle's battery with simple alligator clamps and provides all the air power you could wish for. Designed to be the most compact system, while still offering up more air power than anything in it's class. You'll always be prepared with this portable air compressor from ARB!\u003cbr\u003e\n\u003cbr\u003eThe High Output Air Compressor utilizes ARB's bread and butter on-board air compressor system with slight modifications to allow better heat dissipation. The portable system also comes standard with everything you need to keep your tires filled as well as attachments to inflate sporting and camping goods.  Designed to last, it has an integrated pressure switch that regulates pressure from 75psi to 105psi. This means you won't have to worry about the compressor wearing out from extended use, it runs only when required to do so. \u003cbr\u003e\n\u003cbr\u003e\nUnlike others on the market, this kit comes with everything you need in one conveniently packed box. Set up is quick, just grab the durable carrying case, open the enlarged latches (easy to open while wearing gloves!), run the 7' of cables to your battery and connect with the alligator clips. Whether you're filling tires or using an air powered tool, the 23' heavy duty air line means less fiddling, and more doing. The hose couplings are corrosion resistant and designed with one-handed quick connections that fit most U.S. industrial standard air fittings.\u003cbr\u003e\n\u003cb\u003e\u003cbr\u003eKIT INCLUDES:\u003c\/b\u003e\u003cbr\u003e\n\n\u003cul\u003e\n    \u003cli\u003eHigh output air compressor\u003c\/li\u003e\n\u003cli\u003e304 grade stainless steel heat shield\u003c\/li\u003e\n\u003cli\u003eImpact resistant polypropylene carry case\u003c\/li\u003e\n\u003cli\u003eHigh-temperature air hose made in Japan with US standard fittings, 23' length and rated to 150 psi\u003c\/li\u003e\n\u003cli\u003e1x Quick-connect ARB Tire Inflation Chuck\u003c\/li\u003e\n\u003cli\u003e1x Tire bead seating fitting\u003c\/li\u003e\n\u003cli\u003e1x Inflation accessory kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003c\/ul\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":52076845072749,"sku":"ARB-CKMP12V2","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/CKMP12V2_v3.jpg?v=1752689320"},{"product_id":"p-13773-arb-high-performance-12-volt-portable-twin-air-compressor-ckmtp12-aspx","title":"ARB High Performance 12 Volt Portable Twin Air Compressor CKMTP12","description":"Whether you're the survivalist type or you just like being prepared, ARB's Twin High Performance 12 Volt Portable Air Compressor, aka the CKMTP12, is right up your ally.  Designed and engineered to outlast any thing like it on the market, the twin compressor comes in a portable, compact carrying case complete with an integrated aluminum air tank. Use this powerful unit for anything from inflating over-sized tires to running a variety of air tools. The CKMTP12 connects to your rig's battery with simple alligator clamps and provides all the air power you could wish for.\u003cbr\u003eFinish customizing your vehicle and prepare for the worst with this portable twin air compressor from ARB. Designed to be the most compact system, while still offering up more air power than anything in it's class, the CKMTP12 is a must have.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cb\u003eApplication:\u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n    \u003cli\u003eRapid Inflation of small, medium, large, and over-sized tires\u003c\/li\u003e\n    \u003cli\u003eAir tools rated up to 174LPM (6.16CFM) continuous supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\nThe CKMTP12 utilizes ARB's bread and butter on-board twin air compressor system with slight modifications to allow better heat dissipation. The portable system also comes standard with an integrated aluminum air tank fitted with a pressure cut off switch that regulates between 130psi and 150psi.  This means you'll not have to worry about the CKMTP12 wearing out from extended use, it runs only when required to do so. \u003cbr\u003e\n\u003cbr\u003e\nUnlike others on the market the CKMTP12 comes with everything you need in one conveniently packed box. Set up is quick, just grab the shatterproof carry case from your ideal storage location, enlarged aluminum latches (they wont ware or become loose with time, and can easily be opened while wearing gloves!), run the 7' of cables to your battery and connect with the alligator clips. Whether you're filling tires or using an air powered tool, the 20' heavy duty line means less fiddling, and more doing. The hose couplings are corrosion resistant and designed with one-handed quick connections that fit most U.S. industrial standard air fittings.\u003cbr\u003e\n\u003cb\u003e\u003cbr\u003e\nKit Includes:\u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n    \u003cli\u003eFully assembled and performance tested air compressor and air tank mounted into a water proof carry case.\u003c\/li\u003e\n    \u003cli\u003eCanvas compartment for storing air hose and compressor accessories.\u003c\/li\u003e\n    \u003cli\u003eOEM quality illuminated compressor isolating switch.\u003c\/li\u003e\n    \u003cli\u003eHigh quality wiring loom with automotive grade alligator clamp type battery contacts, and a pressure switch driven automotive relay control circuit.\u003c\/li\u003e\n    \u003cli\u003eTwo splash resistant air filters with washable high-flow sintered bronze filter cartridges.\u003c\/li\u003e\n    \u003cli\u003e6 meter [20 ft] long high quality abrasion and heat resistant air hose with male to female couplings.\u003c\/li\u003e\n    \u003cli\u003eHose couplings are specially designed corrosion resistant, one-handed (push-lock) quick connect type to suit US industrial standard air fittings\u003c\/li\u003e\n    \u003cli\u003eAir blow gun with US industrial standard male air fitting.\u003c\/li\u003e\n    \u003cli\u003eInflation accessories kit including high-flow tire filler attachment (US industrial standard) with integral stop-valve\u003c\/li\u003e\n    \u003cli\u003eA Schrader valve to US industrial standard adapter, and extra nozzle attachments for inflating items such as sports balls, air mattresses, etc\u003c\/li\u003e\n    \u003cli\u003eComprehensive photo illustrated operating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003e\nKey Features:\u003c\/b\u003e\u003cbr\u003e\n\n\u003cul\u003e\n    \u003cli\u003eAnti-vibration \/ sound deadening is integrated into the mount.\u003c\/li\u003e\n    \u003cli\u003eEngineered, built and individually dyno-tested in Australia from local and imported components.\u003c\/li\u003e\n    \u003cli\u003eFully serviceable with all replacement parts available.\u003c\/li\u003e\n    \u003cli\u003eConstructed primarily of light weight, high strength engineering grade materials, including military and aerospace standard components.\u003c\/li\u003e\n    \u003cli\u003eHard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fiber piston seals for reduced friction and maximum trouble free life.\u003c\/li\u003e\n    \u003cli\u003eBuilt with sealed components for moisture and dust resistance.\u003c\/li\u003e\n    \u003cli\u003eMotors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.\u003c\/li\u003e\n    \u003cli\u003eCompressor pistons are equipped with high shock rated roller bearing.\u003c\/li\u003e\n    \u003cli\u003eHigh density and high flow washable sintered bronze air filter element.\u003c\/li\u003e\n    \u003cli\u003eMotors are thermal cut-out protected against damage caused by extreme temperature use.\u003c\/li\u003e\n    \u003cli\u003ePressure switch and relay equipped electrical system prevents run-on when not filling, or any damage to compressor or hoses as a result of the pressure generated from a kinked air line\u003c\/li\u003e\n    \u003cli\u003eIlluminated isolating switch is easy to see at night, and protects the user from hazardous sparking when connecting the alligator clips to the battery terminals.\u003c\/li\u003e\n    \u003cli\u003eEquipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.\u003c\/li\u003e\n    \u003cli\u003eOver-pressure safety valve equipped as a back-up protection from either pressure switch failure, thermal over pressure generated in a hot vehicle (i.e., no need to drain pressure when finished use.), or accidental connection to an external high pressure source.\u003c\/li\u003e\n    \u003cli\u003eCE and C-Tick compliant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":52076844745069,"sku":"ARB-CKMTP12","price":1059.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/13773.jpg?v=1752689319"},{"product_id":"mag-hytec-rear-diff-cover-94-16-ford","title":"Mag-Hytec Rear Differential Cover | 12-Bolt 10.25\" \u0026 10.50\" | 86-16 Ford F-250\/F-350 SRW","description":"\u003cdiv\u003eConstructed from high-quality cast aluminum right here in the USA, this differential cover from Mag-Hytec keeps your differential remarkably cooler than your stock cover. This dramatic increase in heat dissipation happens for three reasons: First, the cast aluminum deals with heat in a vastly better manner than the stock steel pan. Second, Mag-Hytec designed the cover with external cooling fins to get rid of heat fast. Third, this cover holds more fluid than stock. Cool, dense fluid is always a good way to keep temperatures under control. The combination of cooling fins and additional fluid make for an exceptional upgrade to protect your differential.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eMag-Hytec also made sure this cover comes with a host of other features. To keep your fluid clean, the cover comes standard with a magnetic drain plug--designed to pull harmful ferrous metal particles right out of the oil long before they have any chance of hurting your differential. Next, the cover features a pre-tapped 1\/8 NPT port for those who wish to install a temperature probe--capped with a stainless steel plug when not in use. Finally, an o-ring is used to seal the cover instead of messy sealant and gaskets. This cover allows you to drive your truck hard without fear of heat damage!\u003c\/div\u003e","brand":"Mag-Hytec","offers":[{"title":"Default Title","offer_id":52077058228589,"sku":"MH-F12-10.25-A \u0026 10.5","price":308.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/Ford201210_2510_5.1-3016.jpg?v=1752690027"},{"product_id":"rev-x-gear-hd-differential-fluid","title":"REV-X 85W140 GEAR-H High Performance Gear Oil","description":"\u003cp\u003eAre you protecting your differential from how much intensity it's taking? This high-performance gear oil is the kind of fluid you run when you expect your differential to take a beating. Built to withstand the heat, this semi-synthetic blend creates a tough protective film that keeps gears from chewing themselves apart. Even when you're throwing big torque or long hauling at wide open throttle. It cuts friction, so your power actually reaches the ground, keeps temperatures in check during brutal runs, and protects everything inside the housing, from bearings to ring and pinion teeth. Whether you’re running an aftermarket locker, a built rear end, or a factory diff that needs a fighting chance, GEAR-H delivers the durability, smoothness, and reliability that aggressive driving demands.\u003c\/p\u003e","brand":"Rev-X Oil \u0026 Fuel Additive","offers":[{"title":"1 quart","offer_id":52077143196013,"sku":"REVX-GEARH1Q01","price":34.95,"currency_code":"USD","in_stock":true},{"title":"5 gallons","offer_id":52077143163245,"sku":"REVX-GEARH5G01","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/GEARH1Q01-0-1-600x600.jpg?v=1764003081"},{"product_id":"schaeffers-oil-supreme-gear-lube","title":"Schaeffer's Oil Supreme Gear Lube Synthetic Plus SAE 75W-90","description":"\u003cp\u003eSupreme Gear Lube is a multipurpose, thermally stable and thermally durable parasynthetic gear lubricant that is recommended for use in all types of enclosed industrial and automotive gear drives where extreme pressure characteristics are needed.\u003c\/p\u003e\n\u003cp\u003eSupreme Gear Lube is blended from the finest high quality severely hydro-treated polyalphaolefin (PAO) synthetic base fluids and severely solvent refined, severely hydrofinished high viscosity index 100% pure paraffin base oils available.\u003c\/p\u003e\n\u003cp\u003eBlended into these para-synthetic base fluids is a highly specialized non-corrosive, thermally -stable and thermally durable multi-functional extreme pressure additive package.\u003c\/p\u003e\n\u003cp\u003eThe trend among automotive and industrial gear drive manufactures is to operate the equipment at higher speeds, loads, power densities and increased torque. This trend has resulted in automotive and industrial gear drives being subjected to higher operating temperatures. These higher operating temperatures have resulted in today's gear lubricants being subjected to extreme thermal stress.\u003c\/p\u003e\n\u003cp\u003eTherefore, it is important that a gear lubricant possess thermal stability and durability characteristics. Gear lubricants that do not possess these properties rapidly oxidize and decompose when subjected to high temperatures, resulting in the formation of sludge, varnish and carbon deposits on the gears, bearings and seals, abraded seals, premature seal hardening and brittleness, and a loss of the gear lubricant's extreme pressure additive chemistries ability to protect against excessive wear, spalling and overall distress to the gears and bearings.\u003c\/p\u003e\n\u003cp\u003eSupreme Gear Lube's para-synthetic base fluids and the thermally stable and the thermally durable multi-functional extreme pressure additive package enable the Supreme Gear Lube to resist oxidation and thermal stress at operating temperatures 150 to 175 degrees higher than conventional gear lubricants.\u003c\/p\u003e\n\u003cb\u003eThis results in:\u003c\/b\u003e\n\u003cul\u003e\n    \u003cli\u003eA vast reduction in the formation of deposits. \u003c\/li\u003e\n    \u003cli\u003eBetter heat transfer \u003c\/li\u003e\n    \u003cli\u003eExcellent protection to the gears and bearings even under the most extreme thermally stressed operating conditions. \u003c\/li\u003e\n    \u003cli\u003eLess wear to gears, bearings and seals \u003c\/li\u003e\n    \u003cli\u003eIncreased oil seal life \u003c\/li\u003e\n    \u003cli\u003eLower operating temperatures \u003c\/li\u003e\n    \u003cli\u003eLess energy consumption \u003c\/li\u003e\n    \u003cli\u003eLonger lubricant life \u003c\/li\u003e\n    \u003cli\u003eLess equipment downtime \u003c\/li\u003e\n    \u003cli\u003eLonger equipment life \u003c\/li\u003e\n    \u003cli\u003eReduced maintenance costs \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eost types of gearings are designed to operate under hydrodynamic lubrication conditions. That is a full fluid oil film must separate the metal surfaces of the gears and bearings during operation. However, during periods of cold start up, extremely high operating temperatures or high shock loading conditions this full fluid film can be destroyed. Unless a boundary lubricant is present in the gear lubricant when this full fluid film is destroyed, excessive wear can take place. \u003cbr\u003e\n\u003cbr\u003e\u003cb\u003eMicron Moly, the proven friction fighter \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eSupreme Gear Lube contains a proven friction reducer and boundary called Micron Moly. Micron Moly is a liquid soluble type moly that plates itself to the metal surfaces of the gears and bearings.\u003c\/p\u003e\n\u003cp\u003eOnce plated, Micron Moly forms an indestructible long lasting solid lubricant film that is capable of withstanding pressures up to 500,000 psi. This solid lubricant film once plated to the gears and bearings will reduce friction, vibration and wear, thus extending equipment life.\u003c\/p\u003e\n\u003cp\u003eThe Micron Moly also provides a smooth finished surface on all moving parts of the gears. This minimizes the action of cold welding and vibration, which can occur during start up after gears have been standing idle and during periods of high shock loading. This in turn lessens starting loads and peak power demand, thus resulting in a realistic power cost savings.\u003c\/p\u003e\n\u003cp\u003eSupreme Gear Lube contains adhesive-cohesive additives that allow the product to tenaciously stick and cling to the gears and bearings. This ensures the Supreme Gear Lube to retain a fine film that \"stays put\" on the metal surface of the gears and bearings regardless of how thoroughly it is wiped away.\u003c\/p\u003e\n\u003cp\u003eSupreme Gear Lube contains the proper additive system that allows the product to properly function and lubricate limited slip, positraction, and high offset hypoid gear rear ends and differentials.\u003c\/p\u003e\n\u003cp\u003eSupreme Gear Lube meets and exceeds the following specifications and manufacturer's requirements: API Service Classification GL-5, MT-1 and PG-2, Military Specification MILPRF- 2105E, SAE J2360, Mack GO-J, Clark MS-8 Rev 1, Ford M2C105A, M2C108C, M2C154-A, M2C158-A; General Motors specifications 9985476, 9985044; Chrysler; John Deere JIID; Komatsu Dresser B22-003, B22-005, Meritor 076-D, Eaton-Fuller's Lubricant Specifications, Terex EEMS19003, VME American's Specifications EEMS19003F, EMS19107, White Motors MS0016, Volvo, Volkswagen, US Steel 224, David Brown S1.53101 Type E, AGMA 9005, AGMA 250.04, AGMA 251.02, DIN 51517 Part 3 (CLP), Cincinnati Milicron P-59, P-74 and P-78.\u003c\/p\u003e\n\u003cb\u003eIMPORTANT NOTE:\u003c\/b\u003e\u003cul\u003e\u003cli\u003eThis item is not available via Air or Expedited Shipping. It is not legal to send flammable liquids through air transit. If you accidentally do choose expedited shipping we will have to refund you the difference and then ship the item ground.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Schaeffer's Lubricants","offers":[{"title":"Case Of 12 Quarts","offer_id":52077152862573,"sku":"SL-7590","price":255.99,"currency_code":"USD","in_stock":true},{"title":"Single 1 Quart Bottle","offer_id":52077152895341,"sku":"SL-7590-Single","price":22.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/6128.jpg?v=1752690367"},{"product_id":"yukon-grizzly-locker-ford-35-splines","title":"Yukon Grizzly Locker Ford 10.25\" and 10.5\" with 35 Splines","description":"\u003cp\u003eThe strongest and most reliable locker on the market....PERIOD! If you need selectable traction for multiple uses, look no further than the Grizzly Locker by Yukon.  The Yukon Grizzly Locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It's patent pending design reduces common locker failures. All units assembled in the USA!\u003c\/p\u003e\n\u003cb\u003eAPPLICATIONS:\u003c\/b\u003e\n\u003cbr\u003e\nFord E-250 3\/4 Ton (1985 - 2010)\u003cbr\u003e\nFord E-350 1 Ton (1985 - 2010)\u003cbr\u003e\nFord E-450 (2000 - 2010)\u003cbr\u003e\nFord E-550 (2002 - 2003)\u003cbr\u003e\nFord Excursion (2000 - 2005)\u003cbr\u003e\nFord F-150 1\/2 Ton (2000 - 2010)\u003cbr\u003e\nFord F-250 3\/4 Ton (1985 - 1999)\u003cbr\u003e\nFord F-250 Super Duty 3\/4 Ton (1997 - 2010)\u003cbr\u003e\nFord F-350 1 Ton (1985 - 1997)\u003cbr\u003e\nFord F-350 Super Duty 1 Ton (1997 - 2010)","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077202899309,"sku":"YUK-YGLF10.25-35","price":1262.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/8395.jpg?v=1752690530"},{"product_id":"yukon-dana-50-twin-i-beam-front-kit","title":"Yukon Master Overhaul Kit Dana Spicer 50 Twin I-Beam Front Dana Spicer 50 Front, Twin I-Beam","description":"\u003cp\u003eWhether you're replacing your ring and pinion or it's just time for a rebuild, Yukon builds the BEST overhaul kits on the market, actually making your front or rear end STRONGER than stock! Yukon Master Overhaul Kit for DanaSpicer 50 Twin I-Beam front differential, not straight axle. This kit uses Timken Bearings and Races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.\u003c\/p\u003e\n\u003cb\u003eFITMENT GUIDE:\u003cbr\u003eDana Spicer 50 Front, Twin I-Beam\u003c\/b\u003e\n\u003cul\u003e\n    \u003cli\u003eF-250 3\/4 Ton:  1980 - 1997  (Front)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"c-table-simple\"\u003e\n    \u003ctbody\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eRing Gear Diameter:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e9\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eRing Gear Bolts:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e10\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eCover Bolts:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e10\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eCarrier Breaks:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003enone\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eSpline Count:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e30\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003ePinion Support:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eFalse\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eFloat:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e\u003cb\u003eFront\u003c\/b\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eAxle Lugs:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e8\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077203521901,"sku":"YUK-YK D50-IFS","price":447.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/6598.jpg?v=1752690532"},{"product_id":"yukon-overhaul-kit-dana-spicer-70-hd","title":"Yukon Master Overhaul Kit Dana Spicer 70 HD Dana Spicer 70HD","description":"Whether you're replacing your ring and pinion or it's just time for a rebuild, Yukon builds the BEST overhaul kits on the market, actually making your front or rear end STRONGER than stock! Yukon Master Overhaul Kit for DanaSpicer 70-HD differential. This kit uses Timken Bearings and Races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.\u003cbr\u003e\u003cbr\u003e\n\n\n\n\u003cb\u003eCompatible Make \/ Model\u003c\/b\u003e\n\n\u003cul\u003e\n    \u003cli\u003eChevrolet \/ Chevy C30 1Ton (2WD) (1974 - 1988)\u003c\/li\u003e\n    \u003cli\u003eChevrolet \/ Chevy C3500 (1989 - 1998)\u003c\/li\u003e\n    \u003cli\u003eChevrolet \/ Chevy Express Van 3500 1 Ton (1996 - 2010)\u003c\/li\u003e\n    \u003cli\u003eChevrolet \/ Chevy K30\/ K3500 1 Ton (4WD) (1970 - 1989)\u003c\/li\u003e\n    \u003cli\u003eChevrolet \/ Chevy P30 1 Ton Van (1997 - 2001)\u003c\/li\u003e\n    \u003cli\u003eChevrolet \/ Chevy P3500 (1997 - 1999)\u003c\/li\u003e\n    \u003cli\u003eDodge D300 2wd 1 Ton (1960 - 1980)\u003c\/li\u003e\n    \u003cli\u003eFord E-350 1 Ton (1980 - 2010)\u003c\/li\u003e\n    \u003cli\u003eFord E-450 (2000 - 2010)\u003c\/li\u003e\n    \u003cli\u003eFord F-350 1 Ton (1980 - 1997)\u003c\/li\u003e\n    \u003cli\u003eFord F-350 Super Duty 1 Ton (1999 - 2002)\u003c\/li\u003e\n    \u003cli\u003eGMC C35\/ C3500 1 Ton (2WD) (1974 - 1998)\u003c\/li\u003e\n    \u003cli\u003eGMC K35\/K3500 1 Ton (4WD) (1977 - 2000)\u003c\/li\u003e\n    \u003cli\u003eGMC Savana 3500 1 Ton (1996 - 2010)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cb\u003ePlease verify your correct differential application before ordering rebuild kits.\u003c\/b\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077203685741,"sku":"YUK-YK D70-HD","price":715.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/6617.jpg?v=1752690533"},{"product_id":"yukon-master-overhaul-kit-85-05-ford","title":"Yukon Master Overhaul Kit Ford 85-99 10.25\"","description":"\u003cp\u003eWhether you're replacing your ring and pinion or it's just time for a rebuild, Yukon builds the BEST overhaul kits on the market, actually making your front or rear end STRONGER than stock! Yukon Master Overhaul Kit for Ford 10.25\" differential. This kit uses Timken Bearings and Races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.\u003c\/p\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eCOMPLETE VEHICLE APPLICATION:\u003cbr\u003e\u003c\/span\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: bold;\"\u003eFord F-350 Super Duty 1 Ton (1997-1999)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: bold;\"\u003eFord F-250 3\/4 Ton (1985-1997)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: bold;\"\u003eFord F-250 Super Duty 3\/4 Ton (1997-1999)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: bold;\"\u003eFord F-350 1 Ton (1985-1997)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: bold;\"\u003eFord E-250 3\/4 Ton (1985-1998)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: bold;\"\u003eFord F-150 1\/2 Ton (2000-2004)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: bold;\"\u003eFord E-350 1 Ton (1985-1998)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable class=\"c-table-simple\"\u003e\n    \u003ctbody\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eRing Gear Diameter:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e10.25\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eRing Gear Bolts:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e 12\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eCover Bolts:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e 12\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eCarrier Breaks:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e none\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eSpline Count:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e 35\u003cbr\u003e\n            \u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003ePinion Support:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e False\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003eFloat:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e\u003cb\u003eSF, FF\u003cbr\u003e\n            \u003c\/b\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr class=\"c-table-simple__row\"\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e Axle Lugs:\u003c\/b\u003e\u003c\/td\u003e\n            \u003ctd class=\"c-table-simple__cell\"\u003e\u003cb\u003e7, 8\u003cbr\u003e\n            \u003c\/b\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077203915117,"sku":"YUK-YK F10.25","price":612.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/6621.jpg?v=1752690534"},{"product_id":"arb-ckma12kit-12-volt-air-compressor","title":"ARB CKMA12KIT On-Board High Performance All-In-One 12 Volt Air Compressor Kit","description":"\u003cp\u003eCompact, able to operate up to two air lockers, and inflate tires! This permanently mounted air compressor is specifically designed to be used with the installation of a set of ARB Air Lockers. This kit comes complete with a full wiring loom with air locker solenoid plug in contact, mounting hardware with universal bracket, compressor isolating switch, tire inflation kit, and digital tire inflator.\u003c\/p\u003e\n\u003cp\u003eThis compressor can be used to activate air lockers, and perform other functions such as inflating camping gear or filling up your tires. This little pump has enough output to air up four 35\" to 37\" tires in a single duty cycle and will air up a 35\" tire in just over two minutes.\u003c\/p\u003e\n","brand":"ARB","offers":[{"title":"Default Title","offer_id":52077290455405,"sku":"ARB-CKMA12KIT","price":676.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/CKMA12KITv1.jpg?v=1752690831"},{"product_id":"arb-ckmta12kit-twin-air-compressor","title":"ARB CKMTA12KIT On-Board High Performance All-In-One 12 Volt Twin Air Compressor Kit","description":"\u003cp\u003eCompact design and EXTREME efficiency! This permanently mounted air compressor is specifically designed to be used with the installation of a set of ARB Air Lockers. This kit comes complete with a full wiring loom with air locker solenoid plug in contact, mounting hardware with universal bracket, and a quality compressor isolating switch, tire inflation kit, and digital tire inflator. This compressor can be used to activate air lockers, and perform other functions such as inflating camping gear or filling up your tires. This little pump has enough output to air up four 35\" to 37\" tires in a single duty cycle and will air up a 35\" tire in just over two minutes.\u003c\/p\u003e\n","brand":"ARB","offers":[{"title":"Default Title","offer_id":52077290422637,"sku":"ARB-CKMTA12KIT","price":1076.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/CKMTA12KITv1.jpg?v=1752690830"},{"product_id":"p-schaeffers-oil-supreme-gear-lube-synthetic-plus-sae-75w-140","title":"Schaeffer's Oil Supreme Gear Lube Full Synthetic SAE 75W-140","description":"\u003cp\u003eEnsure you are using the only the best gear oil when servicing your Sterling differentials with the Schaeffer's Full Synthetic Gear Lube. This Extreme Performance Full Synthetic is designed for use in high performance differentials. Extreme Performance Full Synthetic is engineered from the highest quality of polyalphaolefin (PAO) synthetic base oils, a non-corrosive, extreme pressure additive and proven friction modifier, Micron Moly. This unique blend helps increase gear efficiency, providing smoother and less gear noise.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eExtreme Performance Full Synthetic can be used in heavy-duty or high performance transmissions, aftermarket 5-speed and 6-speed separate motorcycle transmissions and final drives, including standard and limited-slip differentials and shaft drive transmissions requiring the use of an hypoid type gear oil. (Not recommended for Harley-Davidson Sportsters transmissions and combined engine\/transmission sumps.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Schaeffer's Lubricants","offers":[{"title":"Default Title","offer_id":52077392200045,"sku":"SL-75W140-Single","price":34.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/SL-75W140-Single1.jpg?v=1772644413"},{"product_id":"p-yukon-rear-axle-bearing-seal-kit-ford-85-97-1025","title":"Yukon Rear Axle Bearing \u0026 Seal Kit Ford 85-97 10.25\"","description":"Replace your failed axle bearings and seals in your 10.25 Ford rear differential with the Yukon Rear Axle Bearing \u0026amp; Seal Kit. This kit uses high quality inner and outer bearing and races with a new axle seal. Each kit services one side so if you are needing to replace both sides, you will need two kits. ","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077639532909,"sku":"YUK-AK F10.25","price":332.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/YUK-AK-F1025.jpg?v=1752691999"},{"product_id":"p-yukon-1025-bearing-install-kit-85-99-ford-f-250350","title":"Yukon 10.25\" Bearing Install Kit 85-99 Ford F-250\/350","description":"This Yukon Ford 10.25\" Bearing install kit is just what you need if you are rebuilding your rear differential and resuing your gears and carrier. This kit uses Timken bearings and races along with all high-quality small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to properly install your ring and pinion gear set. Shims not included. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eCOMPATIBLE MAKE\/MODELS:\u003c\/span\u003e\u003cul\u003e\n\u003cli\u003eFord F-250 (1985-1998)\u003c\/li\u003e\n\u003cli\u003eFord F-350 (1985-1997)\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2000-2004)\u003c\/li\u003e\n\u003cli\u003eFord E-250 Econoline (1985-1998)\u003c\/li\u003e\n\u003cli\u003eFord E-350 Econoline (1985-1998)\u003c\/li\u003e\n\u003cli\u003eFord F-250 Super Duty (1999-1999)\u003c\/li\u003e\n\u003cli\u003eFord F-350 Super Duty (1999-1999)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077639926125,"sku":"YUK-BK F10.25","price":594.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/YUK-BK-F1025.jpg?v=1752692000"},{"product_id":"p-yukon-dana-60-chromoly-35-spline-front-axle-kit-85-88-ford-f-350","title":"Yukon Dana 60 Chromoly 35 Spline Front Axle Kit 85-88 Ford F-350","description":"Upgrade and replace your front axles in your Dana 60 equipped Ford F-350 with the Yukon Dana 60 Chromoly 35 Spline Front Axle Kit. The Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability. This kit includes both inner and outer axle shafts and 733X series u-joints. ","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077640122733,"sku":"YUK-YA W26014","price":1367.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/YUK-YA-W26014.jpg?v=1752692001"},{"product_id":"p-yukon-dana-60-chromoly-35-spline-front-axle-kit-with-super-joints-85-88-ford-f-350","title":"Yukon Dana 60 Chromoly 35 Spline Front Axle Kit With Super Joints 85-88 Ford F-350","description":"Upgrade and replace your front axles in your Dana 60 equipped Ford F-350 with the Yukon Dana 60 Chromoly 35 Spline Front Axle Kit. The Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability. This kit includes both inner and outer axle shafts and Yukon Super Joints series u-joints. ","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077640483181,"sku":"YUK-YA W26016","price":2371.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/YUK-YA-W26016.jpg?v=1752692002"},{"product_id":"p-yukon-dura-grip-dana-50-front-30-spline-99-02-ford-f-250350-superduty","title":"Yukon Dura Grip Dana 50 Front 30 Spline 80-02 Ford F-250\/350 Superduty | 00-05 Ford Excursion","description":"\u003cp\u003eYukon Dura Grip is a positraction limited slip differential for your Ford Superduty that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip posi limited-slip is engineered for long life and is completely rebuildable. Dura Grips are built with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip. \u003cb\u003eThis locker is designed for a stock truck axle shaft.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence and performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eCOMPATIBLE MAKE\/MODEL:\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord F-250 (1980-1999)\u003c\/li\u003e\n\u003cli\u003eFord F-350 (1980-1986)\u003c\/li\u003e\n\u003cli\u003eFord Excursion (2000-2005)\u003c\/li\u003e\n\u003cli\u003eFord F-250 Super Duty (1999-2002)\u003c\/li\u003e\n\u003cli\u003eFord F-350 Super Duty (1999-2002)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077641761133,"sku":"YUK-YDGD50-30-1","price":834.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/YUK-YDGD50-30-1.jpg?v=1752692007"},{"product_id":"p-yukon-dura-grip-ford-1025105-rear-35-spline-99-16-ford-f-250350-superduty","title":"Yukon Dura Grip Ford 10.25\/10.5 Rear 35 Spline 99-16 Ford F-250\/350 Superduty","description":"\u003cp\u003eYukon Dura Grip is a positraction limited slip differential for your Ford Superduty that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip posi limited-slip is engineered for long life and is completely rebuildable. Dura Grips are built with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip. \u003cb\u003eThis locker is designed for a stock truck axle shaft.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence and performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eCOMPATIBLE MAKE\/MODEL:\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFord E-350 Super Duty (2000-2015)\u003c\/li\u003e\n\u003cli\u003eFord F-250 (1985-1999)\u003c\/li\u003e\n\u003cli\u003eFord E-250 (2003-2015)\u003c\/li\u003e\n\u003cli\u003eFord E-550 Super Duty (2003-2003)\u003c\/li\u003e\n\u003cli\u003eFord F-350 (1985-1997)\u003c\/li\u003e\n\u003cli\u003eFord F-150 (2000-2013)\u003c\/li\u003e\n\u003cli\u003eFord E-450 Super Duty (2003-2015)\u003c\/li\u003e\n\u003cli\u003eFord E-250 Econoline (1985-2002)\u003c\/li\u003e\n\u003cli\u003eFord E-350 Econoline (1985-1998)\u003c\/li\u003e\n\u003cli\u003eFord E-550 Econoline Super Duty (2002-2002)\u003c\/li\u003e\n\u003cli\u003eFord E-450 Econoline Super Duty (2000-2002)\u003c\/li\u003e\n\u003cli\u003eFord E-350 Econoline Club Wagon (1999-1999)\u003c\/li\u003e\n\u003cli\u003eFord F-350 Super Duty (1999-2016)\u003c\/li\u003e\n\u003cli\u003eFord F-250 Super Duty (1999-2019)\u003c\/li\u003e\n\u003cli\u003eFord Excursion (2000-2005)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077641924973,"sku":"YUK-YDGF10.25-35-1","price":1222.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/YUK-YDGF1025-35-1.jpg?v=1752692007"},{"product_id":"p-yukon-gear-axle-dana-60-hardcore-locking-hub-set-89-93-dodge-w250350-83-97-ford-f-250350","title":"Yukon Gear \u0026 Axle Dana 60 Hardcore Locking Hub Set 89-93 Dodge W250\/350 | 83-97 Ford F-250\/350","description":"Ditch those factory locking hubs and get something hardcore! The Yukon Hardcore Locking Hub Kit. These hubs feature chromoly internals and all steel construction for the ultimate in durability and strength. With these hubs, you will never have to worry about them disengaging under high torque applications. The 1\/3 turn engagement ensures quick changes between two and four wheel drive.Y ukon Hardcore locking hubs are not only great looking, but feature a low-profile design to minimize impact with obstacles, as well as a proprietary coating on the locking gears for decreased friction and a long service life.","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":52077642088813,"sku":"YUK-YHC70003","price":737.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/YHC70003.jpg?v=1752692008"},{"product_id":"p-banks-ram-air-rear-differential-cover-85-23-ford-with-sterling-12-bolt","title":"Banks Ram-Air Rear Differential Cover 85-23 Ford with Sterling 12-Bolt","description":"\u003cdiv\u003eWhen it comes to developing new products, Banks makes products that will actually increase vehicle performance while beating the competition. When it comes to differential covers, Banks knew they could produce a product that would blow the competition away. The Banks Ram-Air Differential cover is the first of its kind. Its unique design cools 5 times better than any flat-back style diff covers. The patented design forces air up and into massive heat radiation fins providing the fastest cooling on the market and creates high velocity air to overcome the \"dead air zone\" behind the differential cover. Servicing your diff could not be easier. No need to remove the cover when changing the fluid thanks to the drain plug, fill plug, and sight glass.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eAnother important feature of Banks diff covers is the internal shape. The original stock cover has a rounded shape to guide the fluid as the gears spin. This is very important for proper lubrication, therefore Banks designed the inside of their covers to also guide the fluid for the best lubrication you can get. Other aftermarket cover makers usually do not take this into consideration, because they mainly focus on making their covers big. In this case, bigger is not always better. If the internal shape is not correct, the gear oil can get whipped up into a foam, and we all know that air bubbles cannot lubricate gears. Protect your rear diff the right way with Banks Ram-Air® Rear Differential Cover.\u003c\/div\u003e","brand":"Banks Power","offers":[{"title":"Natural Aluminum","offer_id":52077663486317,"sku":"BAN-19262","price":375.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black|Machined","offer_id":52077663519085,"sku":"BAN-19252","price":395.0,"currency_code":"USD","in_stock":true},{"title":"Black Ops","offer_id":52077663551853,"sku":"BAN-19258","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/19262-main.jpg?v=1752692071"},{"product_id":"p-readylift-airiq-air-management-package-pre-assembled-2-channel-275sd-compressor","title":"ReadyLIFT AIRIQ Air Management Package | Pre-Assembled, 2-Channel | 275SD Compressor","description":"\u003cp\u003eAre you tired of the inconvenience of manually inflating your truck's airbags? Perhaps you find it challenging to adjust air pressure on the go due to the absence of an onboard compressor. The ReadyLIFT AIRIQ Air Management Package is the solution to both these issues.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eLOGIQ AIRIQ COMPLETE AIR MANAGEMENT\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eAirIQ Complete Air Management packages for load leveling are factory-assembled and tested for guaranteed performance. Our ready-to-bolt-on packages fix weight-related rear squat, with options for side-to-side leveling and on-board air. Nothing rivals the ease and performance of AirIQ.\u003c\/p\u003e\u003ch2\u003e\u003cb\u003eEASY-TO-USE APP\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe AirIQ Bluetooth App delivers user-friendly control of your air suspension and is available free for iOS and Android devices. The App yields precise adjustment of air pressures resulting in effortless height management with the ability to save up to 8 custom presets for different loads.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eAIRIQ MODULAR DESIGN\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe modular design of AirIQ can contain anywhere from 1-4 corner modules and can be customer upgraded at anytime. Never throw away to upgrade again...\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eSMART CORNER MODULES\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEach corner module contains OEM-quality solenoid valves, an onboard precision pressure sensor, and a microprocessor running intelligent algorithms for accurate leveling.\u003c\/p\u003e","brand":"ReadyLIFT Suspension","offers":[{"title":"Default Title","offer_id":52077767623021,"sku":"RL-50-41200","price":899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/airiq-sd2_50-41200-4166.jpg?v=1752692372"},{"product_id":"p-9003-arb-ckma12-on-board-high-performance-12-volt-air-compressor-aspx","title":"ARB CKMA12 On-Board High Performance 12 Volt Air Compressor","description":"\u003cp\u003eCompact, able to operate up to two air lockers, and inflate tires!\u003c\/p\u003e\n\u003cp\u003eThis permanently mounted air compressor is specifically designed to be used with the installation of a set of ARB Air Lockers.\u003c\/p\u003e\n\u003cp\u003eThis kit comes complete with a full wiring loom with air locker solenoid plug in contact, mounting hardware with reinforcing bracket, and a quality compressor isolating switch.\u003c\/p\u003e\n\u003cp\u003eThis compressor, with the addition of the ARB Pump-Up Kit (#171302), can be used to activate air lockers, and perform other functions such as inflating camping gear or filling up your tires.  This little pump has enough output to air up four 35\" to 37\" tires in a single duty cycle and will air up a 35\" tire in just over two minutes.\u003c\/p\u003e\n","brand":"ARB","offers":[{"title":"Default Title","offer_id":52078018101613,"sku":"ARB-CKMA12","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/9003.jpg?v=1752693672"},{"product_id":"p-9005-arb-one-gallon-air-tank-aspx","title":"ARB One Gallon Air Tank","description":"\u003cp\u003eThis air tank is to be used specifically with the ARB On-Board Air Compressors to improve their efficiency by giving more available air volume. We also offer this air tank with an optional ARB Tire Pump Up Kit, a must have for any trail rig.\u003c\/p\u003e            \n\u003cb\u003eOPTIONAL PUMP UP KIT CONTENTS:\u003c\/b\u003e\n\u003cul\u003e                \n    \u003cli\u003eHigh Heat Tolerant 20' Poly Air Hose\u003c\/li\u003e\n    \u003cli\u003eT-Fitting Quick Disconnect\u003c\/li\u003e\n    \u003cli\u003eLocking Tire Chuck\u003c\/li\u003e\n    \u003cli\u003eNeedle For Balls\u003c\/li\u003e\n    \u003cli\u003eAttachments for Airing Up Mattresses\/Swimming Floaties\/Etc.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":52078018724205,"sku":"ARB-171507","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/arb-171507-2.jpg?v=1752693674"},{"product_id":"dynatrac-pro-60-stub-hub-conversion","title":"Dynatrac Pro 60 Stub-Hub Conversion Kit","description":"\u003cp\u003eA must for the serious wheeler! The Dynatrac Stub-Hub Conversion Kit can potentially create over 4-3\/4\" of additional clearance* on the sides of your Dana 60 to navigate those tough, rocky, and potentially expensive sections. The new Stub-Hub kit is ready to bolt-on and start giving you peace of mind and courage the next time you head out.\u003c\/p\u003e\n\u003cp\u003eDynatrac's Stub-Hub Kit drastically reduces the length of traditional hubs by 2.388\" on each side. Total of 4.75\" of clearance end to end.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Dynatrac","offers":[{"title":"Mini \/ 5x5.5 \/ Reuse Brakes","offer_id":52218473939309,"sku":"DYN-DA60-2X1104-O","price":2095.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 5x5.5 \/ 13.00\"","offer_id":52218473972077,"sku":"DYN-DA60-2X1104","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 5x5.5 \/ 13.25\"","offer_id":52218474004845,"sku":"DYN-DA60-2X1104-I","price":2620.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 6x5.5 \/ Reuse Brakes","offer_id":52218474037613,"sku":"DYN-DA60-2X1104-P","price":2095.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 6x5.5 \/ 13.00\"","offer_id":52218474070381,"sku":"DYN-DA60-2X1104-1","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 6x5.5 \/ 13.25\"","offer_id":52218474103149,"sku":"DYN-DA60-2X1104-2","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 8x6.5 \/ Reuse Brakes","offer_id":52218474135917,"sku":"DYN-DA60-2X1104-N","price":2095.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 8x6.5 \/ 13.00\"","offer_id":52218474168685,"sku":"DYN-DA60-2X1104-3","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Mini \/ 8x6.5 \/ 13.25\"","offer_id":52218474201453,"sku":"DYN-DA60-2X1104-4","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 5x5.5 \/ Reuse Brakes","offer_id":52218474234221,"sku":"DYN-DA60-2X1104-5","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 5x5.5 \/ 13.00\"","offer_id":52218474266989,"sku":"DYN-DA60-2X1104-6","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 5x5.5 \/ 13.25\"","offer_id":52218474299757,"sku":"DYN-DA60-2X1104-7","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 6x5.5 \/ Reuse Brakes","offer_id":52218474332525,"sku":"DYN-DA60-2X1104-8","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 6x5.5 \/ 13.00\"","offer_id":52218474365293,"sku":"DYN-DA60-2X1104-9","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 6x5.5 \/ 13.25\"","offer_id":52218474398061,"sku":"DYN-DA60-2X1104-10","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 8x6.5 \/ Reuse Brakes","offer_id":52218474430829,"sku":"DYN-DA60-2X1104-11","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 8x6.5 \/ 13.00\"","offer_id":52218474463597,"sku":"DYN-DA60-2X1104-U","price":3670.0,"currency_code":"USD","in_stock":true},{"title":"Big \/ 8x6.5 \/ 13.25\"","offer_id":52218474496365,"sku":"DYN-DA60-2X1104-12","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/6424_6972bb93-1177-4283-8084-1d5ccc16fa58.jpg?v=1757430957"},{"product_id":"apex-chassis-super-hd-upper-ball-joint-94-99-ram-2500-3500-80-22-ford-250-350-450-550","title":"Apex Chassis Super HD Upper Ball Joint 94-99 Ram | 80-22 F-250\/F-350 4WD","description":"\u003cp\u003eBuilt for the heaviest-duty Ford and Dodge Ram trucks on the road, the \u003cstrong\u003eApex Chassis Super HD Upper Ball Joint\u003c\/strong\u003e delivers unmatched strength, precision, and reliability. Designed for demanding 4WD and work-truck environments, it’s the perfect upgrade for everything from Dodge Ram to classic F-Series rigs to modern Super Duty haulers.\u003c\/p\u003e\n\u003cp\u003eEach joint is constructed around a solid forged SAE 1045 steel housing for maximum structural integrity and a hot-forged SAE 4140 Chromoly ball stud, engineered to handle extreme vertical and torsional loads. Apex’s military-grade acetal bearing provides smooth, consistent movement without metal-on-metal wear—ensuring rock-solid steering feel and long service life under punishing conditions.\u003c\/p\u003e\n\u003cp\u003eEvery component is CNC-machined for perfect dimensional accuracy, induction heat-treated for consistent strength, and E-coated for corrosion resistance. The CR rubber internal seal boot keeps contaminants out while resisting damage from ozone, oil, and temperature extremes. With pre-threaded zerk fittings, gull-wing grease grooves, and pre-greased internals, installation and servicing are fast, clean, and worry-free.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHOUSING\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.\u003c\/li\u003e\n\u003cli\u003eKnurled Housings: The preferred design for aftermarket installations.\u003c\/li\u003e\n\u003cli\u003eCNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eBALL STUDS\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAE 4140 hot forged Chromoly Ball Studs: For the strongest possible metallurgy.\u003c\/li\u003e\n\u003cli\u003eInduction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.\u003c\/li\u003e\n\u003cli\u003ePolished Ball Studs: Are built like an anti-friction bearing with extremely precise tolerances.\u003c\/li\u003e\n\u003cli\u003eRolled Threads: Are made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain't no Ikea furniture!\u003c\/li\u003e\n\u003cli\u003eStep Threads: Allows for very easy movement of hardware on install and superior holding when torqued (installer choice).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eBEARING DESIGN\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMilitary Grade Acetal Bearing: The same bearing material spec'd by the US military for Hummer ball joints. This material is dimensionally stable (doesn't expand or contract with hot or cold, water or oil absorption), it can be polished smooth as steel, is anti-friction, doesn't wear itself out under load like metal on metal, and can take an absolute pounding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eBOOTS\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road-level ozone, oil\/gas\/engine fluids, and extreme heat or cold.\u003c\/li\u003e\n\u003cli\u003eInternal Seal Boot: The boot is coined onto the ball joint, for superior sealing against contaminants.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eHARDWARE\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrade 8 - Class 10.9 Hardware: Superior tensile strength.\u003c\/li\u003e\n\u003cli\u003eCastle Nut: Industry standard where high vibration loads occur.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eLUBRICATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting, you will understand what a simple but great feature this is. Another installer favorite.\u003c\/li\u003e\n\u003cli\u003eGreaseable: Because it should be.\u003c\/li\u003e\n\u003cli\u003ePre-Greased: Just in case you forget, we have you covered.\u003c\/li\u003e\n\u003cli\u003eGull Winged Grease Grooves: Allows for improved lubrication disbursement around the ball stud.\u003c\/li\u003e\n\u003cli\u003eZerk Fittings: Included for every application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSPECIAL FEATURES\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom Features: Multiple Zerk fittings included for each application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Chassis","offers":[{"title":"Default Title","offer_id":52685068042605,"sku":"APX-BJ132","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/BJ132-2_2048x_e4650c37-fe02-4ff8-a46c-53056c61de1a.webp?v=1762192535"},{"product_id":"apex-chassis-super-hd-lower-ball-joint-87-22-ford","title":"Apex Chassis Lower Ball Joint 87-22 Ford","description":"\u003cp\u003eBuilt to handle the extreme torque and front-end weight of Ford’s diesel and heavy-duty trucks, the \u003cstrong\u003eApex Chassis Super HD Lower Ball Joint\u003c\/strong\u003e is engineered for maximum strength, precision, and long-lasting performance. Whether you are hauling, towing, or working hard on or off-road, this joint keeps your suspension tight, stable, and responsive under the toughest conditions.\u003c\/p\u003e\n\u003cp\u003eEach joint is constructed from forged SAE 1045 solid steel for unmatched structural integrity and features a hot-forged SAE 4140 Chromoly ball stud—polished and heat-treated to provide exceptional strength and wear resistance. The military-grade acetal bearing ensures smooth articulation and durability, engineered to handle the punishing loads of heavy-duty Ford applications where failure is not an option.\u003c\/p\u003e\n\u003cp\u003ePrecision CNC machining, induction heat treatment, and an E-coated finish guarantee corrosion resistance and long-term reliability. A compression-style CR rubber boot seals out contaminants while retaining lubrication, and the pre-threaded zerk housing makes servicing fast and simple. With gull-wing grease grooves, pre-greased internals, and Grade 8 hardware, the Apex Super HD Lower Ball Joint delivers professional-grade performance and reliability for Ford diesel trucks that demand the best.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHOUSING\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.\u003c\/li\u003e\n\u003cli\u003eKnurled Housings: The preferred design for aftermarket installations.\u003c\/li\u003e\n\u003cli\u003eCNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eBALL STUDS\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAE 4140 hot forged Chromoly Ball Studs: For the strongest possible metallurgy.\u003c\/li\u003e\n\u003cli\u003eInduction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.\u003c\/li\u003e\n\u003cli\u003ePolished Ball Studs: Are built like an anti-friction bearing with extremely precise tolerances.\u003c\/li\u003e\n\u003cli\u003eRolled Threads: Are made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain't no Ikea furniture!\u003c\/li\u003e\n\u003cli\u003eStep Threads : allows for very easy movement of hardware on install and superior holding when torqued (installer choice).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eBEARING DESIGN\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMilitary Grade Acetal Bearing: The same bearing material spec'd by the US military for Hummer ball joints. This material is: dimensionally stable (doesn't expand or contract with hot or cold, water or oil absorption), it can be polished smooth as steel, is anti-friction, Doesn't wear itself out under load like metal on metal, and can take an absolute pounding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eBOOTS\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil\/gas\/engine fluids and extreme heat or cold.\u003c\/li\u003e\n\u003cli\u003eCompression Boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eHARDWARE\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrade 8 - Class 10.9 Hardware: Superior tensile strength\u003c\/li\u003e\n\u003cli\u003eCastle Nut: Industry standard where high vibration loads occur.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eLUBRICATION\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.\u003c\/li\u003e\n\u003cli\u003eGreaseable: Because it should be.\u003c\/li\u003e\n\u003cli\u003ePre-Greased: Just in case you forget, we have you covered.\u003c\/li\u003e\n\u003cli\u003eGull Winged Grease Grooves : Allows for improved lubrication disbursement around the ball stud.\u003c\/li\u003e\n\u003cli\u003eZerk Fittings : Included for every application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Apex Chassis","offers":[{"title":"Default Title","offer_id":52696538710381,"sku":"APX-BJ146","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/BJ146-2_2048x_5c653b60-99de-4b8c-a3ac-914176402324.webp?v=1762214400"},{"product_id":"dynatrac-dynaloc-locking-hubs-35-spline-78-97-ford-f-250-f-350","title":"Dynatrac Dynaloc Locking Hubs 35 Spline 78-97 Ford F-250\/F-350","description":"\u003cp\u003eIf you’ve upgraded your front axle for strength, your locking hubs should match. The Dynatrac Dynaloc locking hubs are built for 1978–1997 Ford F-250 and F-350 trucks running Dana 60 front axles with 35-spline outer axle shafts. These hubs are designed to give you more confidence when engaging 4WD, with a solid, positive feel and reliable operation even under heavy load. It’s important to note that most factory setups came with 30-spline outer shafts, so this product is only compatible if your truck has already been upgraded to a 35-spline configuration.\u003c\/p\u003e\n\n\u003cp\u003eThe Dynaloc design focuses on strength, durability, and real-world use. With heat-treated chromoly steel gears made in the USA and a unique gear tooth design, these hubs are built to handle high torque without slipping or disengaging. They are up to three times stronger than traditional Dana 60 locking hubs, making them a great choice for off-road driving, towing, or any high-stress situation. The shorter, low-profile design also helps reduce the chance of hitting rocks or obstacles on the trail, giving you better clearance and less risk of damage.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is straightforward with a simple bolt-on setup, and engaging the hubs only requires a quick 1\/8 turn. The mechanism defaults to the locked position, helping ensure dependable operation when you need it most. Altogether, these hubs offer a noticeable upgrade in strength, ease of use, and long-term durability, especially for drivers who have already invested in stronger axle components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT FITMENT NOTE:\u003c\/strong\u003e Fits 1978–1997 Ford F-250\/F-350 Dana 60 front axles equipped with 35-spline outer axle shafts only and will not fit factory 30-spline configurations.\u003c\/p\u003e","brand":"Dynatrac","offers":[{"title":"Default Title","offer_id":53273969426797,"sku":"DYN-FO60-3B396-BB","price":682.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/files\/DTFO60-3B396-BB-dynatrac-dynaloc-locking-hubs.jpg?v=1778006246"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0892\/2487\/2301\/collections\/2816_8e03e4dd-41a2-4e59-9d8d-85cb314e9c9c.jpg?v=1776200575","url":"https:\/\/dieselpowerproducts.com\/collections\/c-1983-1987-ford-67l-idi-axles-differentials.oembed","provider":"Diesel Power Products","version":"1.0","type":"link"}