BD Full Bore Exhaust Manifold 01-10 6.6L GM Duramax 1041460
BD-1041460
20.00
BD-Power
1041460
Diesel Power Products carries the BD Full Bore Exhaust Manifold for the 01-10 6.6L GM Duramax 1041460
PPE High Flow Exhaust Manifolds with Up-Pipes-50 State Legal 01-10 Duramax
PPE-116111200-Main
0.00
PPE (Pacific Performance Eng.)
PPE-116121500
Introducing high flow performance for your Duramax that is 50 state legal!
PPE 118062030 Up-Pipe Gasket Kit (4 Piece) 01-16 6.6L GM Duramax
PPE-118062030
3.00
PPE (Pacific Performance Eng.)
118062030
Whether you're upgrading your stock up-pipes for additional flow or merely replacing a worn out gasket, this four piece gasket kit from PPE is an essential piece of the puzzle.
AFE BladeRunner Iron Exhaust Manifolds 01-16 GM 6.6L Duramax
AFE-46-40024
26.00
AFE
46-40024
These exhaust manifolds will outflow your factory ones by 6% resulting in an increase in performance and throttle response.
PPE OEM Length Replacement High Flow Up-Pipes 07.5-10 6.6L GM Duramax LMM
PPE-116120710
10.00
PPE (Pacific Performance Eng.)
116120710
Your 6.6L Duramax engine produces high exhaust temperatures and pressure that can eventually cause factory up pipes to fail. Replace your factory up pipes with these High Flow Replacement Up-Pipes from PPE.
XDP XD342 Driver Side High Flow Exhaust Manifold 01-16 GM 6.6L Duramax
XDP-XD342
12.00
XDP
XD342
Replace your restrictive driver side exhaust manifold in your 2001-2010 GM Duramax or replace your stock manifold in your 2011-2016 GM Duramax with the XDP High Flow Exhaust Manifold.
PPE High Performance Standard Port Manifold Gaskets 01-16 GM 6.6L Duramax
PPE-118062010
2.00
PPE (Pacific Performance Eng.)
118062010
Ensure a leak free seal when you are installing new exhaust manifolds in your 01-16 GM Duramax with this High Performance Exhaust Manifold Gasket Kit from PPE.
PPE Heat Shield Blanket Set For PPE High Flow Manifolds 01-16 GM 6.6L Duramax
PPE-116016000
5.00
PPE (Pacific Performance Eng.)
116016000
Protect your PPE High Flow Exhaust Manifolds with a set of PPE Heat Shield Blankets and also enhance the spool up of your turbo in your Duramax.
PPE Bolt Set For PPE Exhaust Manifolds M10-1.50x35 01-16 GM 6.6L Duramax
PPE-116110100
2.00
PPE (Pacific Performance Eng.)
116110100
Replace broken or rusty bolts on your PPE High Flow Manifolds in your Duramax with the PPE Bolt set.
Exhaust Manifolds | 2007.5-2010 GM 6.6 Duramax LMM
You may not know it, but the factory driver’s side exhaust manifold is pinched down to allow for steering shaft clearance, which actually isn’t required. As a result, this manifold only flows 80% ... read more
You may not know it, but the factory driver’s side exhaust manifold is pinched down to allow for steering shaft clearance, which actually isn’t required. As a result, this manifold only flows 80% compared to the passenger side. Further, the factory uppipes have proven to crack when subjected to higher than normal EGT's (Exhaust Gas Temperatures). In order to solve these issues, we offer numerous kits from the best in the business for improved performance, lower temperatures, and better reliability.
As always, if you have any questions about which product is right for you and your truck, do not hesitate to give us a call or send an e-mail to [email protected] and we would be happy to assist.
Videos
Not Available
Not Available