PPE High-Flow Exhaust Manifolds with Up-Pipes 11-16 GM 6.6L Duramax LML
PPE-116112000-main
0.00
PPE (Pacific Performance Eng.)
116112000
Gain exhaust outflow velocity while increasing reliability, and even 50 state CARB legal!
PPE 118062030 Up-Pipe Gasket Kit (4 Piece) 01-16 6.6L GM Duramax
PPE-118062030
3.00
PPE (Pacific Performance Eng.)
118062030
Whether you're upgrading your stock up-pipes for additional flow or merely replacing a worn out gasket, this four piece gasket kit from PPE is an essential piece of the puzzle.
AFE BladeRunner Iron Exhaust Manifolds 01-16 GM 6.6L Duramax
AFE-46-40024
26.00
AFE
46-40024
These exhaust manifolds will outflow your factory ones by 6% resulting in an increase in performance and throttle response.
PPE OEM Length Replacement High Flow Up-Pipes 11-16 6.6L GM Duramax LML
PPE-116121115
10.00
PPE (Pacific Performance Eng.)
116121115
Your diesel engine produces high exhaust temperatures and pressure that can eventually cause factory up pipes to fail. Replace your factory up pipes with these High Flow Replacement Up-Pipes from PPE.
XDP XD342 Driver Side High Flow Exhaust Manifold 01-16 GM 6.6L Duramax
XDP-XD342
12.00
XDP
XD342
Replace your restrictive driver side exhaust manifold in your 2001-2010 GM Duramax or replace your stock manifold in your 2011-2016 GM Duramax with the XDP High Flow Exhaust Manifold.
PPE High Performance Standard Port Manifold Gaskets 01-16 GM 6.6L Duramax
PPE-118062010
2.00
PPE (Pacific Performance Eng.)
118062010
Ensure a leak free seal when you are installing new exhaust manifolds in your 01-16 GM Duramax with this High Performance Exhaust Manifold Gasket Kit from PPE.
PPE Heat Shield Blanket Set For PPE High Flow Manifolds 01-16 GM 6.6L Duramax
PPE-116016000
5.00
PPE (Pacific Performance Eng.)
116016000
Protect your PPE High Flow Exhaust Manifolds with a set of PPE Heat Shield Blankets and also enhance the spool up of your turbo in your Duramax.
AFE Twisted Steel Headers / Up-Pipes / Down Pipe Kit 15.5-16 GM 6.6L Duramax LML
AFE-48-34137
44.00
AFE
48-34137
Unleash your LML's performance with the AFE Twisted Steel Headers, Up-Pipes, and Downpipe kit for the ultimate in exhaust flow.
PPE Bolt Set For PPE Exhaust Manifolds M10-1.50x35 01-16 GM 6.6L Duramax
PPE-116110100
2.00
PPE (Pacific Performance Eng.)
116110100
Replace broken or rusty bolts on your PPE High Flow Manifolds in your Duramax with the PPE Bolt set.
Exhaust Manifolds | 2011-2016 GM 6.6 Duramax LML
In 2011, GM finally corrected the pinched-down drivers side exhaust manifold that has plagued the previous Duramax's for years. However, as with all things factory, there is always room for improvemen ... read more
In 2011, GM finally corrected the pinched-down drivers side exhaust manifold that has plagued the previous Duramax's for years. However, as with all things factory, there is always room for improvement. We offer upgraded exhaust manifolds as well as uppipe kits that are designed to significantly outflow the factory system, as well as discourage cracking, which has shown to be an issue on the factory uppipes when they are subjected to excessive exhaust gas temperatures (EGT's).
Videos
Not Available
Not Available