Reliability is more than just durability; it's being made tough and being made right. While there are many options in the aftermarket world to replace and upgrade the factory turbo on your Ram 5.9 Cummins, few offer the ease of installation coupled with the superior performance delivered by the Iron Horn Series by BD-Power.
Over the years, it has been proven that the stock VGT has a high failure rate. Quite honestly, you depend on your truck to get you from point A to point B, so wouldn't it make sense to eliminate a failure point, plus add some power while you're at it?! That's where the Iron Horn comes in. This kit replaces your VGT turbo and bottlenecked exhaust manifold with a genuine Borg Warner S300 SX-E turbo and a durable ductile iron T4 exhaust manifold from BD. While you may or may not be going for racing, pulling, or drag the SX-E turbo was designed for SERIOUS POWER and supports that 950+ horsepower that you're craving. To aid in simplicity, the high-performance manifold is EGR compatible and retains the stock downpipe and intake instead of the "hot air" intakes or 2nd gen conversions. This is the perfect kit for removing their VGT without breaking the bank.
![no shipping](themes/shadows/ui/images/noshipping.png)
Specifications
- SkuBD-1045175
- Dimensions45 13.5 13.5
- ManufacturerBD-Power
- MPN1045175
- Not for sale on licensed California vehicles
- Air intake kits may need alteration other than K&N kit and OEM intake system
- Custom tuning is necessary for alterations to the VGT system when you install this kit
- 2003-2004 model years will require 2004.5-2007 style downpipe and clamp, both available options from above.
- BD Single 300 series SX-E Borg Warner turbos kits that replace your OEM turbo, providing enough air for more power, response and reliability
- Utilizes stock air intake and downpipe*, no need to change either for what you are currently running
- Turbo utilizes high flow T4 turbine housing
- The SX-E turbo was designed for performance with a 360 thrust bearing and enhanced compressor wheel and housing
- The high strength FMW Forged Milled Wheels are lighter and stronger and withstand higher wheel speeds
- Kit comes with BD's Performance Plus T4 5.9L exhaust manifold and gaskets
- No extra piping required, it drops in place for an easy, clean installation
- Comp Wheel: 64.5mm/ 2.54in
- Turbine Wheel: 80mm / 3.15in
- A/R Ratio: 1.00
- Flow: 82 Lb/min
- Approximate rated 650hp (depending on truck configuration)
NO VIDEOS AVAILABLE
Blog Posts
Recommended Products
Recently Viewed
Added To Cart
![BD Iron Horn Series S364SXE/80 1.00AR Turbo Kit 03-07 Ram 5.9L Cummins](themes/shadows/ui/placeholders/noimage_square.jpg)
BD Iron Horn Series S364SXE/80 1.00AR Turbo Kit 03-07 Ram 5.9L Cummins
Quantity: 0
Cart Total$0000.00