The 6.0L intercooler can be used in the 99-03 7.3L Powerstrokes.  It is an economical, effective alternative to expensive aftermarket intercoolers.  This intercooler is larger than the stock intercooler and has improved flow through the end tanks.  This allows for cooler EGTs and more power due to cooler intake air into the engine.  It is a direct replacement for the factory 7.3L intercooler when installed using our silicone hose kits.  If you already have a  6.0L intercooler and just need our hose kit be sure and measure the inlets as some models have one 3" inlet and one 3-1/4" inlet, while others have 3-1/4"connections on both ends.  All parts can be purchased below.  Stainless Steel spring loaded clamps are available for all intercooler hoses!


6.0L Intercooler Swap | Banks Technicooler | Powerstroke Intercooler Boots | Ford Intercooler Hoses | Ford Intercooler Boots | Ford Y Pipe Couplers | Ford Intake Manifold Hoses

6.0L Replacement Intercooler $369
Click Here for Product Details!We now offer brand new from Ford this intercooler from the 2005, 6.0L trucks. This intercooler fits directly into the 1999-2003 trucks with 7.3L Powerstroke engines. This intercooler is larger than the stock intercooler and has improved flow through the end tanks. This allows for cooler EGTs and more power due to cooler intake air into the engine. It is a direct replacement for the factory 7.3L intercooler when installed using the tube and hump hose kit shown above. If your 6.0L intercooler is used measure the inlets as some models used a 3" and 3-1/4" connections, while others are 3-1/4"connections on both ends. Note: If your truck is equipped with an automatic transmission, you will need to move the transmission lines on the passenger side out of the way. For trucks 99-mid 2001 the transmission lines can be bent to clear the intercooler. For 2002-2003 models the transmission cooler lines come out the top of the cooler and will interfere with installation of the intercooler. To resolve this interference you can get the 6.0L transmission cooler with hoses from Ford. 99-2001 Trans cooler lines come out the end 2002-2003 Trans cooler lines come out the top 6.0L Trans cooler lines come out the bottom
99-03 Ford Powerstroke 3"x3.25"x8" Intercooler Connection Hose $28.50
Click Here for Product Details!Intercooler to tube connection transition hose. 3"x 3.25"ID x 8" long. This hose is often used to install a stock Ford 6.0L intercooler into the 99-2003 Powerstrokes with 7.3L engines. It is also used for 2002 and 2003 7.3L stock intercooler with plastic tanks and Ford part# 2C34 6K775AA. You may want to measure your connections before ordering. Available with Spring-loaded constant torque clamps below.
99-03 Ford Powerstroke 7.3L 3"x8" Intercooler Hose $19.50
Click Here for Product Details!99-2003 Ford 7.3L heavy duty drivers side intercooler hose. These hoses are 3"x3"x8" long and fit the stock intercooler on the drivers side with metal end tanks. The passenger side and the newer intercoolers with plastic tanks use the 3"x3-1/4"x8" hose listed below. Please verify your sizes before ordering. Available by itself or with Spring loaded constant torque clamps.
99-03 Ford Powerstroke 7.3L Hose Kit $115
Click Here for Product Details!99-2003 Ford 7.3L hose kit Hose kit for 99-03 Ford 7.3L includes 2)Hump Hoses, 2) Y-pipe couplers and 2) intercooler connection hoses. All hoses are heavy duty silicone construction and will help to prevent leaks and hoses blowing off. The intercooler connection hoses are long enough to double clamp if you need to. *NOTE:Most late model 7.3L intercoolers with plastic tanks use 3x3-1/4"x 8" long hose for both sides and the older units with metal end tanks use a 3"x3"x8" long on the drivers side and the 3"x3-1/4"x8" on the passenger side. Please measure your connections before ordering just in case. Available as shown or with 12 High quality Spring-loaded constant torque hose clamps. Early '99 Trucks (build date prior to 12/07/98) require smaller y-pipe couplers and due to the fact that they are a transition hose cost a little more. Make sure that you order the right kit below. If you order the clamp option for the early 99 trucks it only ships with 8 instead of 12. We don't have spring-loaded clamps small enough. Just reuse the stock y-pipe clamps. Any questions feel free to call.